Question about LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher

Open Question

Reset after replace rotor KUDD01DPPA?

Makes clicking noise

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

While driving my navigator there's a clicking noise from the front drivers side and gets worse the faster I go c.v axle was replace along with ball joints what could be the next possible place to look


clicking noise especially on turns at low speeds is a cv joint
it is possible that unless you used a brand new shaft as a replacement, the reconditioned shaft was only greased with new balls and not properly reconditioned
however if could also be a problem rotor for the brakes( cracked)or worn pads where the pad thickness indicator is touching on the rotor
I would be taking it to an accredited service shop with experience on your make of vehicle and take a service person on a test run to properly identify the noise you are hearing

Sep 26, 2016 | Lincoln Navigator Cars & Trucks

1 Answer

1998 rear brakes make a noise when backing


Noise after replacing rear brake shoes and drums...help! - Toyota ...

www.toyotanation.com/.../328271-noise-after-replacing-rear-brake-shoe...
Jan 19, 2010 - 15 posts - ‎9 authors Check to make sure the new drums dont have a longer/thicker drum face that is scraping the back plate. ... 1998 Mazda 626 FS-DE/CD4-E .... I experienced rear shoebrake clicking/clacking with an older Saturn. ... plate and to be banged back against the plate causing the clicking or clacking noise. screeching noise from rotors + brakepads after ...
15 posts
Nov 20, 2009
'95 Right Rear Brakes makin' a "clicking" noise when ...
15 posts
Jan 6, 2008
Rear Brake Noise
15 posts
Oct 30, 2005
More results from www.toyotanation.com

Nov 08, 2015 | 1998 Toyota Camry

1 Answer

Pisher Paykel top drawer is making a grinding noise when the cycle begins. How can I fix this?


Hi,

Replace the rotor and check for any damage from the foreign objects that caused this to happen. Normally its glass that causes this to happen. Sometimes the fins on the rotor can be cleared to spin freely but most of the time the rotor has to be replaced due to damage. Thanks for the video, it helps.. Good Luck

Dec 27, 2014 | Dishwashers

1 Answer

Brakes make a clicking noise when brakes are applied lightly on 2009 lincoln mks


i bet the lil sleeve did not get put on the shoe holder its no big deal if thats the case

Dec 05, 2012 | 2009 Lincoln MKS

1 Answer

What's your problem?GE Model # GDL20KCSABS clicking sound Clicking sound


The clicking noise would generally be the overload on the compresser. Which means the compresser is locked up and unable to pump and needs to be replaced. Sorry You can install a 3in1 hard start which may free the compresser rotor and give you a little more time out of it but will need to be replaced eventually Good luck

Sep 08, 2012 | GE Refrigerators

1 Answer

I replaced my right front drive shaft or axle a week ago because there was a constant clicking noise coming from the front left side, after replacing the clicking stopped for a day and now its clicking...


the hub assembly is most likely bad its the bearing inside thats moving making the clicking noise it moves out and touches the rotor making the brake pad move and click

Jan 20, 2011 | 1991 Mazda 323

1 Answer

I have a clicking and grunting noise from rear brakes, also a scraping noise on a 2006 NISSAN ALTIMA. i was told by one mechanic that cheap brakes and rotors make noise like this and that I should change...


this could be true. if the rotors are worn down(if it looks and feels as if there is a lip on the edge of the rotor) then most likely you may need to have them replaced.

Jul 30, 2010 | 2003 Nissan Altima

1 Answer

Rear brake noise after brake replacement


probably a dumb question, but if there is a backing plate, did you make sure it isnt bent and hitting the rotor? you never want to sand new rotors, although i dont think it would cause this concern. i would suggest lightly scuffing up the brake pads. this will eliminate any noise caused by the contact of the rotors and pads. if it goes away then you know its a problem with the pads/rotors.

scoring of only the inside rotors would make me think that possibly the caliper slides are frozen up. make sure they move quite freely on the slides. it is not uncommon for brake pads to score rotors though.

but brake noises at low speeds that dont' change when applying light brake pressure are usually some sort of metal or something contacting the rotor.

Mar 23, 2010 | Toyota Camry Cars & Trucks

Not finding what you are looking for?

Open Questions:

See all LG 24 in. LDS 5811ST Stainless Steel Built-in Questions

LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Dishwashers Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Mike

Level 3 Expert

4336 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a LG Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...