Formula for changing meters to feet

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

The volume is about 105,244 cubic feet (that's about 105 thousand).

One foot is 0.3048 meters, so one cubic feet is about 0.0283 cubic meters, or, by taking reciprocals, one cubic meter is about 35.315 cubic feet.

One foot is 0.3048 meters, so one cubic feet is about 0.0283 cubic meters, or, by taking reciprocals, one cubic meter is about 35.315 cubic feet.

Nov 22, 2016 | Miscellaneous

Use a Tape Measure:

Measure the Length, Width & Depth of the inside or outside and use this to calculate the cubic feet or meters.

It's a rectangle, so it's far easier than a circle.

http://www.autocalculator.org/Calculators/Cubic-feet-formula.aspx#.VsvxQzY0nXE

Calculator

Cubic Feet Calculator

Measure the Length, Width & Depth of the inside or outside and use this to calculate the cubic feet or meters.

It's a rectangle, so it's far easier than a circle.

http://www.autocalculator.org/Calculators/Cubic-feet-formula.aspx#.VsvxQzY0nXE

Calculator

Cubic Feet Calculator

Feb 23, 2016 | Kenmore Refrigerators

1 meter is 3.2808399 feet (3 feet 3? inches)

so 2000 sq ft is 2000/3.2808399 some 605 sq meters

22.28 * 41.18 will give you square meters 917.4904

so leaves you about 1/3 after you save your 605 sq meters

so 2000 sq ft is 2000/3.2808399 some 605 sq meters

22.28 * 41.18 will give you square meters 917.4904

so leaves you about 1/3 after you save your 605 sq meters

Mar 02, 2015 | Office Equipment & Supplies

This is very easy. 1 foot is equal to 0.3048 of a meter. So, simply multiply however many feet you have by this number and you should get your meters. To go from meters to feet, you would divide.

Nov 14, 2014 | Lowrance Elite 5 Color SonarGPS Combo

The answer is yes.

The acceleration due to gravity is approximately 32 feet per second or 9.8 meters per second. If you're measuring the distance in feet use 16, if you're measuring in meters then use 4.9.

The acceleration due to gravity is approximately 32 feet per second or 9.8 meters per second. If you're measuring the distance in feet use 16, if you're measuring in meters then use 4.9.

Nov 12, 2013 | Office Equipment & Supplies

1 sq meter=*10.7639104* sq feet

30 sq meter=30x10.7639104 sq feet

Therefore,

30 sq meters=*322.917312* sq feet

30 sq meter=30x10.7639104 sq feet

Therefore,

30 sq meters=

Jun 29, 2011 | Cell Phones

3.05 meters = 10.007 ft, or 120.08 in

3.92 meters = 12.86 ft, or 154.33 in

3.05 meters x 3.92 meters = 10.007 ft x 12.86 ft = 128.69 ft^2 (feet squared)

= 120.08 in x 154.33 in = 18531.946 in^2 (inches squared)

if you meant millimeters then

3.05 mm = .01 ft, or .12 in

3.92 mm = .01286 ft, or .15433 in

3.05 meters x 3.92 meters = .01 ft x .01286 ft = .0001286 ft^2 (feet squared)

= .12 in x .15433 in = .018531946 in^2 (inches squared)

**1 meter = 3.2808399 feet**

**1 meter = 39.3700787 in**

**1 millimeter = 0.0032808399 feet**

**1 millimeter = 0.0393700787 inches**

3.92 meters = 12.86 ft, or 154.33 in

3.05 meters x 3.92 meters = 10.007 ft x 12.86 ft = 128.69 ft^2 (feet squared)

= 120.08 in x 154.33 in = 18531.946 in^2 (inches squared)

if you meant millimeters then

3.05 mm = .01 ft, or .12 in

3.92 mm = .01286 ft, or .15433 in

3.05 meters x 3.92 meters = .01 ft x .01286 ft = .0001286 ft^2 (feet squared)

= .12 in x .15433 in = .018531946 in^2 (inches squared)

Jun 19, 2011 | Office Equipment & Supplies

The square foot is the smaller unit of area, so you will have to divide a measurement in square feet by the number of square feet per square meter. Since there are 10.76 square feet per square meter, divide by that value.

Obviously, to convert from square meters to square feet, you would multiply by that value.

1 square meter is 10.76391 square feet.

Feb 13, 2011 | Garden

You can go to the links below to learn how to change

http://manuelsweb.com/in_cm.htm

http://www.ehow.com/how_6013031_change-centimeters-meters-inches-feet.html

Good luck and please rate 4 thumbs up for the free answer

http://manuelsweb.com/in_cm.htm

http://www.ehow.com/how_6013031_change-centimeters-meters-inches-feet.html

Good luck and please rate 4 thumbs up for the free answer

Sep 03, 2010 | Dewalt 2 1/4 Hp Dw618b3 Three Base Wood...

according to FCC rules **RULE 8 - Antenna Height**

{A} "Antenna" means the radiating system (for transmitting, receiving or both) and the structure holding it up (tower, pole or mast). It also means everything else attached to the radiating system and the structure.

{B} If your antenna is mounted on a hand-held portable unit, none of the following limitations apply;

{C} If your antenna is installed at a fixed location (whether receiving, transmitting or both) it must comply with EITHER one of the following:

[1] The highest point must not be more than 20 feet (6.10 meters) higher than the highest point of the building or tree on which it is mounted;

or

[2] The highest point must not be more than 60 feet (18.3 meters) above the ground.

{D} If your CB station is located near an airport, and if your antenna structure is more than 20 feet (6.10 meters) high, you may have to obey additional restrictions. The highest point of your antenna must not exceed 39.37 inches (1 meter) above the airport elevation for every 109.36 yards (100 meters, 1 hectometer) of distance from the nearest point of the nearest airport runway. Differences in ground elevation between your antenna and the airport runway may complicate this formula. If your CB station is near an airport, you may contact the nearest FCC field office for a worksheet to help you figure the maximum allowable height for your antenna.

{A} "Antenna" means the radiating system (for transmitting, receiving or both) and the structure holding it up (tower, pole or mast). It also means everything else attached to the radiating system and the structure.

{B} If your antenna is mounted on a hand-held portable unit, none of the following limitations apply;

{C} If your antenna is installed at a fixed location (whether receiving, transmitting or both) it must comply with EITHER one of the following:

[1] The highest point must not be more than 20 feet (6.10 meters) higher than the highest point of the building or tree on which it is mounted;

or

[2] The highest point must not be more than 60 feet (18.3 meters) above the ground.

{D} If your CB station is located near an airport, and if your antenna structure is more than 20 feet (6.10 meters) high, you may have to obey additional restrictions. The highest point of your antenna must not exceed 39.37 inches (1 meter) above the airport elevation for every 109.36 yards (100 meters, 1 hectometer) of distance from the nearest point of the nearest airport runway. Differences in ground elevation between your antenna and the airport runway may complicate this formula. If your CB station is near an airport, you may contact the nearest FCC field office for a worksheet to help you figure the maximum allowable height for your antenna.

Jul 20, 2009 | Cobra MRF55 2-Way Radio

98 people viewed this question

Usually answered in minutes!

×