- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Connect the receiver to the computer. Make sure the keyboard & mouse have good batteries in them. Turn the mouse over and find the tiny button on the bottom and press it and hold it. Find the button on the bottom of the keyboard and press and hold it at the same time. Some systems have a third button on the receiver that connects to the pc, if this is the case with yours then depress all three buttons for twenty seconds or so to calibrate your system and your done.
Press the connect button on the remote sensor and when it blinks press the connect button under the logitech mouse. The blinking on the receiver should stop if it finds it. Make sure there are not wireless devices like cordless phones, etc beside the receiver or mouse as it degrades the signal.
These devices will never auto connect after a battery change.
You must press the button on the receiver then the red button on the mouse. Then the button on the receiver again, then the red button on the keyboard.
The buttons on the devices (keyboard and mouse are on the bottom of the device.
You will need to press and hold the connect or reset button on the wireless mouse receiver that is plugged into your computer. While pressing that button also press the connect or reset button on the bottom of the actual mouse. The lights should blink indicating they are now connected and you should be good to go!
Please let me know if you have any further questions or problems.
Of course you know to press the connection button on the receiver then on the keyboard.
Since setPoint is recognizing the connection I wonder do the multimedia and function keys work?
Do you have the the USB receiver for the KB/Mouse plugged into a hub or KVM switch? If so plug it directly into the back of the PC.
See this KB http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=9247
If you know the batteries are good, then turn the keyboard over and find the small reset/connect button and press it. This resets /connects the board to the receiver. If it still doesn work, press the button on the receiver and then the mouse. Hope this is of help to you. Bud
Have you replace the batteries? If so try the following.
Press the Receiver button (and the lights will start
Then if the Keyboard isn't working, press the small RESET/CONNECT
button on the back of the board to connect the keyboard to the
If the MOUSE isn’t working, push the small RESET/CONNECT button
on the back of the mouse to connect to the receiver. Then they
should work okay.
Hope this helps. Bud
Try disconnecting the Mouse Receiver from the
USB port and reinstall the CD software program. When
the program asks you to connect the MouseReceiver to the USB
port, do so and it should work.
Hope this helps. Bud