Question about Televison & Video
I have a DayTek 32" Flat Panel LCD TV model number DK321A. It continues to lose time. I tried a factory reset code I found on the internet and now the power button from the remote does not always work. (I am not sure if it was a proper code and realize I should not have used it, Sorry!). Do you think the proper factory reset code would work and if so, what is it, do you know? By the way I have ruled out batteries as a problem for the power button. My thoughts are that both problems could be fixed by a true factory reset. I hope I am correct. Please help and I hope you have a great day!
0195 0226 0720. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
Posted on Mar 24, 2014
Testimonial: "It seems the link you left is a list of codes for universal remotes to link to the TV. I am using the original remote. What I am looking for is the code you enter into the remote to reset the TV back to factory condition. Thank you for trying and I hope you have a great day!"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Are you sure there is not a problem with the TV set? The set will need to be on to unlock the front panel. Bypassing the V-Chip Lock on most Mitsubishi sets use a four-digit passcode that is required to view a V-Chip locked program, view the locked TV, cancel the lock, or enter the V-Chip lock menus. If you don't have the passcode, it is easy to bypass. This is neccessary if you forgot the code, purchased the set used, or if you simply don't feel like searching through your files to find it. To bypass the V-chip: You can view the locked shows by pressing the number 9 and QV buttons on the remote at the same time, whenever your passcode is requested. This process temporarily unlocks the TV. To reset the code: When you use the button combination 9 and QV while entering the V-Chip Lock menu, this process deletes your old passcode and prompts you to enter a new passcode. Good Luck
Posted on Mar 17, 2007
Good luck. I have the same issue. No codes are available for the X2Gen. To make matters worse, it appears to use a non-standard frequency for the carrier signal, maening that other remotes won't work with the TV.
I purchased a learning remote, thinking I would just "teach" it the codes directly from the X2Gen TV remote. This didn't work either.
There appears to be no way to use any remote other than the one supplied with the TV. Whatever you do, don't lose it!
Posted on Feb 05, 2008
The power supply voltages might look good on an oscilliscope or using a
DC meter, but that doesn't really tell you if the supply is good.
Your TV has an unusual symptom, however 99% of the problems on these TVs are caused by the power supply. I have had 3220s that won't power on, the remote or controls on the TV won't work, or the unit blanks out and all sorts of other odd problems. The power supply can test fine, but if you substitute it the TV will work fine.
Sorry to say you're up a creek. The good news is that just about any 5,12,24V power supply for a 32:" TV will work if you are comfortable rewiring the connectors. I have done this a few times and rescued the TVs from an early grave (I'm actually just about to start on another one now). The pinout is written on the board, and make sure the power supply you want to use also has the pinouts marked on the board.
Posted on Jul 22, 2009
Tips for a great answer:
Jun 09, 2011 | Televison & Video
Nov 30, 2010 | Televison & Video
Oct 06, 2010 | RCA Universal Remote Control
May 27, 2010 | Televison & Video
Feb 13, 2010 | Televison & Video
Dec 02, 2009 | Televison & Video
Aug 11, 2009 | Dynex DX-LCD19-09 19 in. LCD TV
84 people viewed this question
Usually answered in minutes!