Question about Dell Office Equipment & Supplies

Open Question

Dell v313w locked in sleep mode

Green power light stays lit..nothing else lights up, including the control panel screen. None of the buttons do anything so I can't press the wrench button to reset or anything else. Prior to this the printer had been working fine...no warning it is just unresponsive with the green power light on?? We have this printer overseas right now, so it's not possible to send it in for service. I don't usually look at the back of the printer..dont know if this could be relevant, but in trying to discover the issue, I do notice that the black box that the power cord plugs into has a red light that I can see glowing inside the machine? I unplugged the cord from that small box and removed the box to see if it was something that needed to be replaced or something? but can't find even a name for what it is..let alone a replacement for it...when the box is unplugged from the machine but the power cord is still plugged into the small box there is a small green light that comes on. Dont know if this has anything to do with the sleep mode/ energy saver lock problem or if this is normal for this machine as I have not ever had to investigate it before???

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ctf1800
  • 4402 Answers

SOURCE: Flashing Green Light on Front of 73" Projection TV

on the signal board replace the caps by the 5/9 volt regulators. c2p04 is the main culprit. 6 caps in total can be changed. I believe c2p05 also.

Posted on Dec 15, 2007

  • 3 Answers

SOURCE: Neoware Red light power

Power Supply is Shot...I've been working on literally 30 of them for my company....I'm not happy. If you know of any company who will be willing to sell them. Please tell me. HP wants $50 to Fix Just the Power Supply Board

Posted on May 28, 2008

AlmostBob
  • 550 Answers

SOURCE: Orange LED blinks 5 times then a 2 second green

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=257&modelid=10239

If you type in 'flashing power light' in the problem box, for 5 you get print head failure, often it means the connectors between cartridge and print carriage are dirty, can be cleaned with a pencil eraser and a soft cloth. there is a sequence of checks and repairs to follow on the canon service page

Posted on Sep 02, 2008

  • 1 Answer

SOURCE: New HL-5240 printer red status light upon powering up

My HL-5240 did the same thing, Here is what I found:

Look at the back of the printer. Pull down the back cover. Look to the right and the left of the exposed internals of the printer and there should be another handle/knob you can pull down. Pull these both down simultaneously and check to make sure there isn't a piece of paper in there! This was a shock to me! My office printer was held up for days until I found this hidden door in the back! I felt like an idiot that it was from a stupid paper jam!

Posted on Sep 05, 2008

getbharti
  • 33 Answers

SOURCE: blinking red light

Red Light blinks when the ink cartridge is bad..
to check which one is bad..
take out all cartridges from the printer and clean the copper contact and the inner area of the cartridge slot with a lint-free cloth...
power off the printer and unplug the power cable from the printer..
press & hold the power button on the printer for 60 seconds..
connect the power cable and power on the printer..
insert any ONE cartridge and close the door..
similarly insert other cartridges one by one and close the door and check if the light blinks..
if it blinks ..it means the respective cartridge is bad and replace it..
if u have replaced all the cartridge..it might be possible that the cartridge sensor inside the printer have gone bad..
if this is the case so ..u might service the printer..
but I will suggest to go for a new printer as 7660 is quite an lod printer which hp launched in 2004 or 2005..
even if u have juz bought it ..it will be refurbished one..

Posted on Nov 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix my Jvc the screen won't power on. When I reset it the lights on the buttons light up...but shut off right away. It has power because the red light on the bottom left corner stays lit.


JVC LT-46AM73 LCD TV Won't Turn On - YouTube

? 3:28
https://www.youtube.com/watch?v=y5j3RGUe4gM
Feb 25, 2015 - Uploaded by Awesome Things
JVC LT-46AM73 LCD TV won't turn on after power outage. ...LCD & LED TV Repair - No Image & Blank Black ScreenFlashlight Test - How to ...

JVC wont turn on - JVC - Streaming Video & TVs

www.tomsguide.com/answers/id-1677424/jvc-wont-turn.html
May 15, 2013 - JVC lcd tv will act like its turning on then the green light after 2 seconds ... wont turn on Forum; SolvedAcer Laptop V4DA2, screen won't turn on.

My Jvc Av-32F476 Tv Won't Power On, The Green On Timer Light Stays ...

www.diyforums.net/my-jvc-av-32f476-tv-wont-power-on-the-green-on-...
Dec 8, 2013 - My jvc av-32F476 tv won't power on, the green on timer light stays on and m. ... On the remote control, look for the buttons PICTURE MODE and DISPLAY, with ... My Jvc Lt24dd52j Won't Turn On The Blue Light Is Flashing But ...
Nov 1, 2014
I Have A JVC LT-42TG30J, Randomly The Tv Has Decided It ...
Aug 29, 2012
I Have No Picture On My 47 Inch On My Jvc Big Screen Just A ...
May 23, 2012
My Dynex 42" Wont Turn On Power Led Is Lit Up But It Won't C ...
May 24, 2011
More results from www.diyforums.net

Jan 18, 2016 | JVC Televison & Video

Tip

The front light lit on my Whirlpool dryer is showing control locked


Hi.

If the front light lit is control locked, that means that your Whirlpool electric dryer had been set in control lock mode.

Control lock is a special mode that will prevent user from changing settings or using control until the dryer gets unlocked again.

The machine is set to control lock mode by holding down the CONTROL LOCK/UNLOCK button for several seconds. In the same way you can stop the control lock mode when the machine is already set to Control Lock.


When the dryer is running and Control Locked is on, the dryer can still be stopped by pressing the Pause/Cancel button, but cannot be restarted until the control is unlocked.

If the front light lit is control locked but the dryer door opens and it does not turn off, then you are probably in this situation. In that case, the door will be opening , but the machine still stays locked.

Disconnecting the machine from power, either unplugging power cord or tripping circuit breaker, won't help. The control lock system is designed to stay on in case of power failure.
If the machine is control locked, try unlocking it with the following procedure.

To unlock: Press and hold the CONTROL LOCK/UNLOCK button for 3 to 5 seconds to turn the control lock feature off.

If that does not work, try disconnecting power for five minutes to reset the machine, and eventually do unlock again. As said, cutting power alone will not cause the machine to unlock.


If the machine is still not responding, the lights stay on all the time, the dryer panel does not respond to control unlock procedure, and the door does not lock anymore, then it may be a defective control board.

If you are in this situation, before replacing the control board more parts, including the door lock must be tested. In that case the best option may be contacting the Whirlpool support number listed on the Dryer use and care manual, usually in the last pages.

In this case try resetting control lock as explained above, as told the dryer is more likely control locked and then stopped.


Regards.

Ginko.

on Feb 01, 2010 | Whirlpool GEW9250 Electric Dryer

1 Answer

Dell monitor flashing green power button black screen.


Your computer is in sleep mode, a low power mode that conserves power by turning off the screen and hard drive.

Push the power button on the system and the computer will resume.

If you don't like this feature, you can turn off sleep mode in the power options in Control Panel

Jul 26, 2011 | Dell Dimension 2400 PC Desktop

1 Answer

Amber colored power light on eMachine W3503


The amber power light indicates that your computer has been "sleeping" or "hibernating" and usually all it takes to restart the computer is tapping a key on the keyboard. If this is not the case, try holding the Power switch down for 6-10 seconds to force the system off. Restart in Safe Mode and try to find the settings for Sleep/hibernate, open the control panel and open the Screen Saver. Select "Change Power Settings" and set it for "Never" on sleep and hybernate.

Nov 10, 2009 | E-Machines W3503 PC Desktop

1 Answer

When put power cable in orange light comes on power button and wont boot up


Sir,
Orange light usually comes only if your system stays in low power mode or sleeps, So u get orange light immediately when u switch on the system, try pressing the ESC Key on the top left corner of the Keyboard, and if not try pressing the power button again...

If not working,tell me Whether do u get any sounds in system?
Your system Operationg System?
And What u get on the screen, when u switch on?


Thanks, Regards
Vinod

Jun 29, 2009 | Dell GX270 P4-2.8 512/40/24X/XPP/NONE...

1 Answer

Front panel lights blink on/off once per second


Hey,
I would like to agree to the diagnosis that you have done on the monitor . Thanks for a well complied solution. You can try the following website
http://werepairmonitors.com/monitor-repair.htm

dell generally sources the monitors from NEC,Hitachi or LG.

Thanks
proton

Mar 23, 2009 | Dell UltraSharp 2005FPW 20.1" LCD Monitor

1 Answer

I have a brand new acer aspire one. A moment ago, when I wanted to open it, I saw that the green light on its top right, that is, at its "start" button was on, and the battery was a bit displaced at one...


Most likely your laptop is going into sleep mode. Lots of them do not like sleep mode if nothing happens when you push the power button try to hold it down for about 5 sec. your computer should power off and then you can start as normal. If this problem persists change the options in your control panel to turn sleep mode off. That should solve it.

Dec 18, 2008 | Computers & Internet

1 Answer

Stuck in sleep mode


Press the power button on the Computer it should come out of sleep mode then if it doesn't hold the power button of the computer down until the system turns completely off.

Then turn back on the computer should now boot fine. Once in windows goto control panel and select power option then adjust the setting.


Hope this helps you
Cheers J

Jan 05, 2008 | Dell Dimension 5100 (D51L1) PC Desktop

2 Answers

Power button won't turn monitor off?


ok,your monitor is in  a very simple problem.clean the control panel circuit of your monitor,or if it is not working replace the tact switch in your monitor.

Oct 18, 2007 | Sharp LL173C 17" Flat Panel LCD Monitor

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Office Equipment & Supplies Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

color wheel light...
color wheel light...

Level 2 Expert

138 Answers

Are you a Dell Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...