Question about Suunto SK7 Add-On Compass for Cobra, Vyper, Gekko And Zoop Consoles

1 Answer

Suunto zoop screen is frozen in dive mode and will not turn off

Screen is stuck in dive mode. this happened to both my zoops at the same time. any ideas?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just take the battery out and put it back in. It happens to me also from time to time. About once out of every 130 dives. It happens with the Suunto Vyper Air too. I dive with two Suunto dive computers for that reason.

Posted on May 18, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set the time in Zoop C3001PV03 Watch?


manual here

http://ns.suunto.com/Manuals/Zoop/Userguides/Suunto_Zoop_UserGuide_EN.pdf

Aug 19, 2015 | Watches

1 Answer

How to set the time in titan zoop c3001pv04


I am sorry but the time cannot be changed. But there is another option in which you can not see the date. Press mode button or the bottom left button until display shows T2 in the bottom left side. Press Reset button or the upper left button. Thus will make the hours number blink. Set the time using ST/STP button or the upper right button. To set the minutes, press Reset button or upper left button and the minutes number will blink and set it using the ST/STP button or the upper right button.

Dec 02, 2014 | Watches

1 Answer

I have a suunto stinger dive watch after i changed the battery the ACW stays on the screen .


open watch again and press tiny reset 'button' with a pin. That's how I fixed the same problem

Jan 11, 2011 | Suunto Replacement Strap - Stinger...

1 Answer

I have packed my computer in my backpack and after a few hours now i picked it up and found that it's in the dive mode: top line normally shows no-deco time = so now it's showing 9:59 (like in the...


All dive computers will automatically come off dive mode when they are out of water. sounds like you may have water in it. I strongly recommend that you do not dive with this unit but send/take back to the place where you got it. I would guess it is still under warranty. Hope that helps

Oct 19, 2010 | Tusa Zen Wrist Dive Computer (IQ900)...

1 Answer

What are my wheels on my 2004 Fatboy made of. Are


Most of the original solid wheels for the Fatboy were cast aluminum wheels that were polished along the rim and then sealed with a sealant to keep them shiney for a long time. This sealant eventually starts to crack and flake off and the wheel will tarnish. You can strip the sealant off and then repolish the edge of the wheel and reaseal it with a product called "Zoop". It's hard work and the "Zoop" is expensive but it works fairly well.

Apr 21, 2010 | 2004 Harley Davidson FLSTF - FLSTFI Fat...

1 Answer

Suunto Cobra Computer Console, battery replacement


Hey scuba2man, I have the same problem. Did you ever work out what was going on? My console didn't register any depth for first couple of dives (I had to turn it on every 5 mins to check air). Next couple of dives it told me I was between 98 and 103 metres deep (whatever that is in feet). I was at a maximum depth of 22m!!
I will let you know if I find solution. If not then I'll just get a new one!!!

Nov 06, 2009 | Suunto Cobra Integrated Computer

1 Answer

Seiko M705 - 5A10 series divers watch. Time is Frozen


Have the batteries checked and an "AC" done to it. These watches generally have several batteries and the die off can be slow and only fail partially. The "AC" or all clear function will reset the circuit board and bring all your functions back.
As with any dive watch, be sure that you take it to a watch maker/technician that can reseal and pressure test the watch to insure it is safe for diving.

Sep 18, 2009 | Watches

2 Answers

Pressure gauge problem with Suunto Cobra 2


Salva,

The error in pressure is actually a "feature" of Suunto computers. Suunto is probably one of the most conservative brands out there, and many experienced divers tend to stay away from them for that very reason.

The manual actually calls out this "feature" on page 27.

The remaining air time calculation includes a 35 bar/500 psi safety reserve. This means
that when the instrument shows the air time to be zero, there is still about 35 bar/500 psi
of pressure left in your cylinder, depending on your air consumption rate.

http://media.suunto.com/media/suunto/manuals/en_US/cobra2_usersguide_en_v3_m56577569830698583.pdf

Regards,
Darlene

Jul 30, 2009 | Suunto Cobra Integrated Computer

Not finding what you are looking for?
Suunto SK7 Add-On Compass for Cobra, Vyper, Gekko And Zoop Consoles Logo

Related Topics:

866 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suunto Camping, Backpacking & Hiking Experts

Tom Chichester

Level 3 Expert

34186 Answers

Brad Brown

Level 3 Expert

15557 Answers

ray gallant

Level 3 Expert

43030 Answers

Are you a Suunto Camping, Backpacking and Hiking Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...