Question about EnGenius EAP350 EBusiness Class Indoor Long Range Wireless-N Gigabit A

1 Answer

Engenius eap350 not connecting to ps3

We are able to connect to everything wireless in the house (phones, laptops, and desktop) but are still unable to connect to the ps3. It isn't obtaining an IP address. We didn't have to change anything for any of the other devices.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

If its far away or if you have device that work generaly in thae same area then its not a issue of interference. esspecialy if it worked fine before. but one thing always bothers me is that tvs the magnetic feilds are like a invisible sheild for wifi sometimes wifi is upstairs and the tv is downstairs and the tv is blocking the signal. try moving the ps3 or the router a bit. but worst case is that the device has a issue with ssid

I have noticed that if you change the password to a router and something like a ps3 had the old password sometimes it will not work until you change the name of your network. not sure why.

Sorry if I am usless

Posted on Mar 23, 2014

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Macs R We
  • 481 Answers

SOURCE: How to setup internet between 2 EnGenius EOC-2610 devices?

Thanks for a very thorough problem report. It's a little ambiguous near the end, though, so I will have to restate what I think I understand you are saying.
You are saying that you have your internet connection and AP in one building, and two devices or PCs in that building can access the internet and share files (though you don't specify if they are using the EOC-2610 access point or are just accessing the router in some other fashion). But you have a remote building where there is one PC and one EOC-2610 in Client Bridge mode, and although both EOC-2610 units seem to be communicating with each other, the PC will not communicate with anything. (I presume you have inspected the access point's configuration screens and verified that it does have the other EOC-2610 listed as a connected client.)
First, the PC in the remote building has to be connected to the Client Bridge EOC-2610 by its ethernet cable in order to access the network. Second, the PC in the remote building has to have a valid IP address in the range 192.168.0.0/24, or it won't communicate with anything. If you are relying on your router's DHCP to assign your PC an IP address, verify that this has happened by examining your PC network properties. If you are assigning all IP addresses manually, make sure you have assigned the PC an address, and one that doesn't duplicate some other device.
Sometimes failure to specify DNS servers appears to be a lack of communication with the network. Open a browser and type 66.70.119.204 in the URL bar. If you get to fixya.com, you have a good network connection. If you type fixya.com in the URL bar and can't get the same result, you need to define DNS servers on the PC (or inside your router).

Posted on Jun 17, 2010

Macs R We
  • 481 Answers

SOURCE: Hi, I cannot setup my

You need to enable the DHCP server on the EOC-2611P. Then it will negotiate an IP address with your PC without you having to set one by hand.

Posted on Oct 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a way to connect the old landline phones to a router


I know of no way to do this. Try contacting Linksys (largest maker of routers) support and ask them, there may be an adapter to do this.

Sep 21, 2016 | EnGenius ESR300H - wireless router -...

1 Answer

Mac Laptop cannot access internet via the Engenius EAP350 wireless AP


Jason,

What does the logs say over EAP350, are the cards on Macs properly getting associated with EAP350? What happens if you put static IP?
Also check for the latest firmware for EAP350 which addresses this issue.
Regards

Feb 27, 2014 | EnGenius EAP350 - wireless access point

1 Answer

My EAP 350 not supporting POE for more than 40 mtrs. i am using netgear prosafe POE switch. Thanks in advance


Dear Rajkuma,
As per poe 802.3 af specification only 50 Mtrs distance is supported.
If you want to cover more distance then you must purchase 1 Port PoE Repeater which Allows up to an additional 330 ft
Hope this may solve your problem.

Apr 17, 2013 | EnGenius EAP350 - wireless access point

1 Answer

How do I get my EnGenius ESR-9752 router to work with my Actiontec GT701 modem? I have a desk top computer using XP. I just bought a lap top with wireless capabilites. I want to run this system through the...


1. connect yellow cable from Actiontec to the internet port (labeled internet)
2. Power cycle the engenius router.
3. login to the Engenius and verify the status. You should an IP Address from the ISP (Internet Service Provider). If not then you will have to verify the IP address from the router.
4.Make sure the laptop the see the wireless connection.
5.Verify the "ESSID" if your router and connect.

Apr 25, 2010 | Computers & Internet

1 Answer

Laptop not connecting to wireless network


Don't wait tell you laptop is defective, at least buy a new wireless lan before its too late.

Sep 30, 2009 | Dell Inspiron 5100 Wireless Mini-pci...

1 Answer

Losing wireless connection


Your phone frequency must be the same with frequency of your wireless router. To avoid this you access the web GUI of your router page..http://192.168.1.1..( in most cases)...and go to the wireless settings...look for the frequency tab and change the settings ( you can try 1-10). DO trial and error...

Jul 11, 2009 | Computers & Internet

1 Answer

I can get iternet access on the desktop, and the router says that everything is connected (at least.. accordig to the status lights) and yet, I'm unable to get the wireless to connect. no laptop in the...


You need to set up security on the router that matches that setup on any wireless laptops.

Reply respond and I can give you more directions, but the procedure is in your owner manual.

Jan 24, 2009 | Belkin F5D7330 802.11g/b Wireless Adapter

1 Answer

DNS error when connecting PS3 to internet


you could try getting a wifi adapter and creating an access point, you can connect that way if your ps3 has wifi I have a laptop with windows XP Pro and have been trying that my desktop PC with Vista Home can see it.
MY Components:
-Desktop PC with Vista Home (Main PC, connected to Internet with Ethernet to a Linksys Wireless Router B and G).
-Get internet thru cable TV (broadband),from this cable modem plugs to router and from router to PC Vista(desktop)
-Linksys Wireless G/B Router
-G-Card for my Laptop Windows XP Pro and
-Playstation 3 capable of sharing info and use printer

At the moment all of them have internet w different IP's (000.000.0.001, 000.000.0.002,etc.). What I want to achieve is that I can use the Printer that is connected via USB to my PC Vista (desktop) and share files. Right now the only thing been able to do is that my PC Vista see my Laptop but Can't find my PC on my laptop. Anybody, Help?
-When I turn On my media sharing in my PS3, my internet on Laptop loses it while PS3 search and find,then, because laptop lost wireless,the PS3 looses the laptop and I get wireless back. I knowis a stupid setting but tired of workin back n forth. Thanks

Jan 10, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Unable to connect to the Internet


Check to see if your wireless card is displayed under “Network Adaptors” in “Device Manager”. You can access the "Device Manager" by going to the 'Control Panel", "Administrative Tools", "Computer Management" and select "Device Manager" located in the left side column. If it is detected and there are no alerts or errors, try uninstalling the wi-fi card, reboot the laptop and reinstall the drivers.



Your responses are intended to improve the level of service provided. Please show your appreciation by rating your experience.
Thank You.

Nov 04, 2008 | Dell Inspiron 5100 Wireless Mini-pci...

2 Answers

Need help with connect a d-link,dl 624 router


You wireless router/access point can host several simultaneous connections to the internet. Just connect your laptop to the wireless network as you would from your desktop computer.

Hope this helped.

MO

Jul 11, 2008 | D-Link AirPlus Xtreme G DI-624S Wireless...

Not finding what you are looking for?
EnGenius EAP350 EBusiness Class Indoor Long Range Wireless-N Gigabit A Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top EnGenius Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

rdarell

Level 1 Expert

6 Answers

Karen Gibson

Level 1 Expert

16 Answers

Are you an EnGenius Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...