Question about LG 32LG30 32 in. LCD HDTV

Open Question

Picture half screen only

Half top got picture, half bottom no picture

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

gopakumarg43
  • 73635 Answers

SOURCE: LG 50PC3D the picture on my TV is half way up the screen top half bottom half no picture what could cause this

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to Plasma & LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Posted on May 31, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bottom half of screen is black


The display strip is not properly seated in the connector base. That is a hardware problem so dont think of a software error.

Oct 07, 2014 | Samsung Un46eh6000 46-inch 1080p 120hz Led...

1 Answer

Vertical blanking


CHECK C2C52 10 UFD @ 50 V OFF THE BASE OF Q2C51 ON THE SIGNAL PCB. 2. CHECK C2P05 100 UFD 16 V OFF PIN 3 OF IC2P01 AND IC2P01 PART # 270P466020 (9-VOLT REGULATOR). BOTH ARE ON THE SIGNAL PCB.

Dec 06, 2007 | Mitsubishi VS-60705 60" Rear Projection...

1 Answer

Only get the bottom half of screen with good picture, top is color lines.


Its a Plasma so it likely has 2 sustain boards--one for top half of screen and another for the bottom. Some brands use different names but this is likely the issue here.

Apr 23, 2012 | Akai PDP-5016H 50 in. HD-Ready Plasma...

1 Answer

Bottom half of screen black-out


I would replace the lower Y buffer. Part number 996500032640. Goodluck.

Jul 05, 2010 | Philips 42PF7220A 42 in. Plasma Television

1 Answer

Vizio sp42a


your tv is having a problem of more than one component .to get rid of the problem u should rectify your vif horizontal and vertical sections

Sep 24, 2008 | Vizio P2 42 in. HD-Ready Plasma Television

1 Answer

Phillips 42 inch Plasma -Screen Issues!!!


intermittent loss of picture on either bottom or top half of screen is specific to y buffer boards located on left side of screen going from top to bottom when looking at back of tv. the y lower buffer would be the board to replace to resolve the loss of bottom half of picture. if the top half also is going out intermittently could tied to upper buffer as well but just a note the y main board to right of these buffers drives those two boards so in some cases could also be part of the problem. if only bottom half is affected i would recommend replacing lower buffer only

Aug 07, 2008 | Philips 42PF7320A 42 in. Plasma HDTV

1 Answer

Model 42mf231d/17 42" plasma


If the loss of picture is either on top half or bottom half of screen. there are y buffer boards that go from top to bottom on left side of screen when looking at back that control those sections. when there is loss of half of picture then buffer associated with that area would be at fault and would need to be replaced. when i see a degrading symptom such as loss of picture on top half or bottom half leading to no picture issue normally you would check heat syncs on y sustain board and if not heating up after a few minutes of being turned on would recommend replacing y main and both y upper and lower y buffer boards as they complete a circuit

Jun 04, 2008 | Philips Magnavox 27MS343S 27" TV

1 Answer

No picture on plasma


Service time! Get quickly to the retailer or service port for what ails this set...accordianman

Mar 04, 2008 | Televison & Video

1 Answer

I have a Mitsubishi VS-60.. With a Picture


Vertical IC outputs , vertical Capacitors are most like the culprit on your deflection panel. good luck

Aug 16, 2007 | Mitsubishi VS-50501 50" Rear Projection...

1 Answer

Screen split with black bar through center, top of picture shows in bottom


It sounds as you desribe, the vertical output IC and or the b+ feed capacitor off the Hi voltage transformer feeding the vert. IC its required voltage. Not a really hard job to replace, but not for a handi person to do. This should be left to the professional, as there are no user serviceable parts inside this set and with the HI voltage and the safety issues its best to call somesone to assist you with this repair. Good Luck

Jun 14, 2006 | Sanyo DS31520 31" TV

Not finding what you are looking for?
LG 32LG30 32 in. LCD HDTV Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

73635 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...