Question about HP Compaq WF1907 Monitor

Open Question

How do i take the monitor apart to replace power switch

Could just start peeling but there's always a trick or two .

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I removed 6 screws but can't get shredder apart to check switch


I have just taken my shredder apart and found 3 smashed cogs so it is garbage.

The access screws are underneath on mine and although I removed them all it still didn't split. There was one further screw hiding under a label. This is a common trick. Press your finger on it and you will see the recess. Push your screwdriver through it or carefully peel it back.

Nov 15, 2016 | Shredder Office Equipment & Supplies

1 Answer

What causes a Syncmaster 2253LW monitor to start ok and immediately fade.


The monitor may be failing. Here's some tricks I would try...
1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor.
2. Verify the monitor cable is firmly connected to the computer and the monitor.
3. Verify that you have turned the monitor power switch on.
4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works).
5. If the power light on the monitor is not on, try a different power cord.
6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced.
7. Also, you could try your monitor on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers.
Good luck.

Aug 01, 2014 | Samsung SyncMaster 2253LW Monitor

1 Answer

My samsung Tablet's Screen keeps flickering continously


Here's some tricks I would try...
1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor.
2. Verify the monitor cable is firmly connected to the computer and the monitor.
3. Verify that you have turned the monitor power switch on.
4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works).
5. If the power light on the monitor is not on, try a different power cord.
6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced.
7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers.

Good luck.

Jul 07, 2014 | Computers & Internet

1 Answer

Boot in f 12 windows starts then black screen


Here's some tricks I would try...
1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor.
2. Verify the monitor cable is firmly connected to the computer and the monitor.
3. Verify that you have turned the monitor power switch on.
4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works).
5. If the power light on the monitor is not on, try a different power cord.
6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced.
7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers.

Jul 06, 2014 | Computers & Internet

1 Answer

Does anyone know where i can get the black plastic piece that snaps in on top of the power supplies power recepticle to hold it in on a dell e153fp lcd monitor?


You could always try eBay for a trim piece like this, but a zip tie of appropriate length might do the trick as well if you are trying to secure the cable and prevent it from falling out.
Otherwise, if this is part of the power supply please provide the part # you need and I can try to help you locate a replacement.

Jan 10, 2011 | Dell E153FP 15" LCD Monitor

1 Answer

Trying to relpace the on/off switch on my solis crema sl70. I have the machine apart, but can not get the switch out of the face plate. Anyone kn ow the secret?


Hi The foil on the front has to peel back until the switch will push out the front. Peel from a corner. Make sure that the switch goes back in the same way.

Feb 17, 2010 | Solis Crema SL-70 Espresso Machine

1 Answer

I want to replace the power switch board on my hp vs19e monitor.


About your only hope for getting a replacement switch is to buy a "Parts Only" monitor off of EBay and carefully remove the switch. This one is tricky it's attached to the front bezel as you've likely found out. When you disassemble the monitor, lay it face down and remove the bac plastic then remove the 4 screws holding the button board on then take the rest apart. That's the safest way.

Mar 28, 2009 | HP Pavilion F1903 19" Flat Panel LCD...

2 Answers

Flickering monitor


Flickering screen display

Flickering on the screen can be caused by defective hardware in the computer or by improperly installed software, but it can also be caused by interference from external devices. The following examples describe situations in which your screen could start flickering:
  • Screen starts flickering because of interference caused by devices which generate magnetic fields, for instance:
    • a TV set
    • a laser printer
    • another monitor
    • fluorescent lights
    • hidden power lines
  • Apart from interference, an incorrect setting in your system CMOS setup can also cause flickering. On some systems it is possible to distinguish between interlaced and non-interlaced monitors. The setup of your system should always be colour non-interlaced.
  • Proximity to the monitor of fans, air-conditioning units or other devices with rotating motors.
  • The number of devices using power from the same electrical line. Are you overloading the plug?
  • Monitor placed on an unstable surface.
  • Improper video drivers, this is a software problem, see section B
  • An improperly configured or a defective video card.

Sep 30, 2008 | E-Machines E17T 17" Flat Panel LCD Monitor

3 Answers

Dead monitor,,,,,,,,,,,,,,,,,,,lcd viewsonic


If the power supply is not wqrking then it is the invertor unit that has dies.
Replace the monitor is the best advice- If it that recent out of warranty may be worth contacting 'viewsonic to see if they will discount you one.

Jul 19, 2008 | Mag Innovision 19" LCD Flat-Panel Monitor...

Not finding what you are looking for?
HP Compaq WF1907 Monitor Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...