Question about Hotpoint RVM1435 Microwave Oven

Open Question

Microwave does not heat

Hotpoint microwave model number rvm1435bd001 does not heat

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How can I get a copy of the manufacturer's installation instructions for a Hotpoint JX-81J over the range microwave oven?

JX-81J is the microwave recirculating charcoal filter for several models of GE and Hotpoint microwaves. The installation instructions will be available from the manufacturer with the model number of the microwave itself.

One microwave that uses this filter is the RVM1535MMSA . See for all of the details on this microwave. The owner's manual, , shows the installation of the filter on page 34. The guide for installing the microwave above the range is .

If you have a different microwave, add a comment with that model number. I hope this helps.

Cindy Wells

Feb 13, 2017 | Hotpoint Microwave Ovens

1 Answer

Just stopped heating anything last night, it's a Hot Point Counter Saver Plus but says on inside to call GE 1-800-626-6000

On that same label there is a MODEL number that we need to show you a parts listing of what parts may have failed. Hotpoint and GE are on in the same... the only difference is the brand name on the decals. Of course they use different model numbers.... Your model number will be similar to this: RVM1435BD001 I will use that as my parts reference model number as the interal parts that may have failed will be pretty much identical.

When a microwave just out of the blue stops heating usually the either the diode or the capacitor has failed.

See items 49 and 50 this link:

This unit also has 2 thermostats that can also cause it to stop heating. One actually controls the fan speed and the other is an over temp sensor that should shut off everything. The thermostat that controls fan speed shuts off the magnetron power on some units until the unit cools down and then it will work again.

If the magnetron has failed they usually make a loud buzzing sound when you turn on the unit from being cold. (Stuck oscillator) This can also cause the HV power diode and the unit fuse to fail.

Sears parts direct also has the parts for this unit here:

I change out the diode FIRST (after testing the old diode to make certain the diode has in fact failed.) I also test the capacitor while the diode is disconnected from the capacitor.

At this time I think you have a diode or a capacitor problem. If you have someone you know that can use a meter I can pass the information to them on how to test the diode and the capacitor so that you don't order parts that you DO NOT need.

If I got your model number wrong you can enter your model number on the displayed page of either link above. Or respond here with your model number and I will look up your unit.

Thanks for choosing FixYa,

Sep 25, 2011 | GE Microwave Ovens

1 Answer

We have Hotpoint Model # RVM1535DM2WW microwave that all operations work except it stopped heating. Manufacture date is Jan 2010.

Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips


Apr 16, 2011 | GE Hotpoint Over-the-Range Microwave

1 Answer

Hotpoint Microwave oven Model RVM1435WD will not heat up. It will start and the fan runs, but will not heat any food,


Here is a tip that will help you to figure out what is wrong with your Microwave Oven....

Microwave Oven Troubleshooting Tips


Jan 16, 2011 | Hotpoint Microwave Ovens

1 Answer

It won't heat water,but it will turn around

Sounds like you lost your HV diode. Magnetron could be bad but these days they are pretty good. Diode costs about $5 at . It is located in left side near the rear and should be straightforward replacement. Let me know how this works out. Thanks for using FixYa. Contact me if you need more info.


Feb 11, 2010 | Hotpoint RVM1435 Microwave Oven

1 Answer

Microwave has power turn table works won't heat hotpoint model rvm1435bd 001

Check your door satey interlock switches.

If these switches fail (do you open the door while the machine is cooking?), the microwave doesnt know the door is shut and will not turn on the magnatron.

If you need more help, let me know.


Sep 27, 2009 | Hotpoint Microwave Ovens

1 Answer

Everything appears to work fine but it is not heating anymore.

If the microwave oven appears to be working but it is not heating the food, it is very possible that the magnetron, or its power supply has failed.

Jerry G.

May 03, 2009 | Hotpoint RVM1435 Microwave Oven

1 Answer

Microwave not working

The main controller board, or one of the power supplies has failed and require to be replaced.

You should take the microwave oven in for an estimate. I strongly suggest to not service this type of appliance yourself unless you are trained and experienced in microwave oven service.

There are many safety issues when servicing microwave ovens.

Jerry G.

Apr 04, 2009 | Hotpoint RVM1435 Microwave Oven

2 Answers

Brand new Hotpoint Microwave doesn't heat

Brought microwave back to store. It didn't appear to be something I would be capable of fixing myself.
Got a new one which is working fine.

Mar 21, 2009 | Hotpoint RVM1535MMSA Microwave Oven

Not finding what you are looking for?
Hotpoint RVM1435 Microwave Oven Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Jim Thurston

Level 3 Expert

670 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Hotpoint Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides