Question about Walthers Toys

1 Answer

Assembly of walther pk380

Spring during assembly - can't get it back in the gun

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 15 Answers

Hi, Here is the link for the PDF file for the Walther PK380. Chapter 11 deals with disassembly, and I do see the spring you are speaking of in the schematic. I hope this helps, and have heard many folks with the same complaint.

http://www.carlwalther.com/docs/8.505.82.01_instruciton_manual_for_pk380.pdf In addition, you can contact their US customer service. Hope this helps you:


Kyle Hudson, Gun Technician, Walther arms, inc.

Walther


479-646-4210 ext. 7
479-646-4206 fax

7700 Chad Colley Blvd, Fort Smith, AR 72916


www.WaltherArms.com

Posted on Jan 01, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

NEED INSTRUCTIONS HOW TO ASSEMBLE INTERNAL SPRINGS AND PARTS...


After disassembling my EasyShot 5650, I had the same problem with the pesky spring. NOTE: The spring in question is NOT the tension spring for the staples.

The picture shows the internal schematics of an EasyShot 5650 staple gun or tacker by Arrow. It was taken from a reverse engineering project for school kids. Unlike the boring grey one in the picture, the most updated version of the EasyShot 5650 comes in translucent jewel tones.
11_30_2016_10_00_44_pm.png

Oct 08, 2014 | Tools & Hardware - Others

1 Answer

How do you open/refill this stapler?


Push the top of the lever located on the back of the stapler.It will pop out on a spring. Slide a new strip of staples in and push spring/rod assemble back in until it clicks into place.

May 31, 2011 | Ace Hardware Ace Staple Gun

1 Answer

How do you fill JT-21 staple gun? I have JT 5/16 inch staples. I know to fill from the back. I can pull out the little silver thingy in the back so that I can see the long screw. Do I put the staples...


Just pull the spring assembly out completely (silver thingy), slide one full length of staples into the gun, then reinsert the spring assembly until it locks in place. Hope this helps!

Jan 25, 2011 | Hand Tools

2 Answers

Assembly instructions for reassembly. I had to disassemble glue to clean and the spring popped out and I am not sure how it goes back together


the spring goes behind the trigger, but i would need to know the brand and model glue gun to really help with this problem

Nov 17, 2010 | Crafts & Hobbies

1 Answer

When tank pressure is on gun sprays without trigger pulled


The only seals I know of that would cause this are around the spindle assembly. If you have changed these then you may have a problem with the seal retainer, a weak spring or bent spindle. Also make sure there are no metal shavings to hinder the sealing. Sometimes they can be left in the gun during machining process.
Hope this helps but if not please let me know and I will try and trouble shoot further.

May 14, 2010 | Binks MACH 1 HVLP Pressure Feed Spray...

3 Answers

I need help reassembling my Crosman 1088....I had to take it apart for repair now im having trouble figuring out how the hammer mechanism goes back together correctly....I have the exploded view and parts...


Well.. it's really rather late, so I don't know if you're still trying to put the thing back together, but I was just having issues getting the hammer assembly on mine to work..

Going from this parts list: http://www.shans2003.ru/Article/pi_Crosman_1088-EVP.pdf

Assuming you had the same problem I did:
Start by putting the trigger assembly in (parts 37 and 40, the shorter pin on 40 goes through the holes on 37 as shown in the diagram)
Then insert pin 28 in to the hole that's right at the crook where your thumb rests.
Then part 35 goes over that pin with the little tiny nub pointing towards the back of the gun.
Spring 36 goes over that nub, and slides against the flat spot in the frame.

Pin 27 will then be placed in to the hole just above the hole for pin 28.
Then slide the hammer over said pin. now comes the tricky part. You will need something of moderate length, extremely thin and decently strong, I used an exacto knife. Use your tool of choice to press part 35 back, compressing the spring and push the hammer against the frame.

The two pins on the hammer should be in position such that the hook on the trigger assembly, and the crook on part 35 rest against them.

Once you have that done, keep holding the hammer in place, hook the spring hanging from it over the pin set in the frame. (should be pretty clear which one. and then re-assemble the rest of the gun.

Be warned spring 29 does not like going back in. you will likely feel like you need 3 hands (one for the hammer, one for assembly 60/spring 29 and one to put the frame back on.

Hope it helps.

Nov 10, 2009 | Sport & Outdoor - Others

1 Answer

Karcher G3050OH Pressure Washer Spill / Unloader Valve (Bypass)


You should put 'locktite' on the male thread and screw it in all the way and lock it there. That is how it works ,the spring keeps the valve at the bottom closed during high pressure operation. When the gun is released the part with the o-ring is forced down resulting in the valve opening and then the pressure is by-passed.Those dont normally give trouble. Look for a blocked nozzle or a restriction somewhere in your high pressure hose.

Sep 07, 2009 | Karcher 2500 PSI Pressure Washer

1 Answer

Paslode 900420 piece fell out


Be sure to remove the metal nose piece that covers the lockout bar when assembled. It may be stuck to the other half of the gun. Replace the bar and the spring and put the metal nose piece in its position over the lockout bar. At this point the metal nose piece will be on the opposite side. This will allow you to replace the 2 halves carefully so as not to loose the spring.

Apr 23, 2009 | RTO PasLode 900420 Impulse Framing Nailer

Not finding what you are looking for?
Toys Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Walthers Toys Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

ray gallant

Level 3 Expert

41378 Answers

Are you a Walthers Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...