Question about Juniper Networks IDP Upgrade Kit for ISG 2000 system, including IDP Lic Key, additional memory, and 5-device NSM (NS-ISG-2000-IKT) Firewall

2 Answers

Jukebox nsm2000 when i select a track it loads spins then rejects the disk flashing error 60 also it keeps blowing the glass fuse and the red led light no ld2 keeps flashing and ld1 is solid it only blows one of the five fuses any help would be gratfully recieved

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Error 60 is connection to the CD player interrupted.

There is no supply voltage present for the decoder board or the CD player.

Check that all of the cables to the decoder board are in good condition and connected correctly and securely.

Posted on Jun 15, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 567 Answers

Error 60 means connection to cxd player interupted,no supply voltage present for decoder board ,check cables to decoder board and fuses

Posted on May 11, 2010

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rowe ami r80 jukebox is exepting selections but keeps reapeating


I don't have a manual handy but it could be a few things, you may need to reinitialize the jukebox, maybe there is a dirty wiper or the control module may be on its way out. I would try to locate a repair manual for it, there might be an old vending company in your area with one.

Nov 27, 2012 | Audio Players & Recorders

1 Answer

My DVD player won't read, keeps saying disk error


In most cases when the CD does not play it is possible that the optical head is a suspect. Sometimes it might pick up ordinary audio CD but will not play other formats. This indicates that the optical head is weak and so there is no detection or scanning of the CD . If the optical is working the tracks will be read immediately but with no scanning the laser head can be defective.

The main motor will not work in some cases as unless the tracks are read the drive motor will not work with signal from the processor.
Sometimes certain cleaner disks will not be tracked to run for cleaning as it will not be read and so will reject. Hence it is ideal to manually clean the laser head eye using a cleaning swap /cotton bud with gentle pressure on the lens eye.
If there is no result then watch if the CD spins or tries to spin. If so the board seems to work unless a test is taken on the main board but the possibility of a defective optical head can be the suspected fault.
If any of the above seems otherwise we must recheck with possibilities of a malfunction of the main processor board

Jul 12, 2011 | Televison & Video

1 Answer

Hi, I have an early model of a Wurlitzer 1015 OMT CD that keeps blowing two of the fuses on the amplifier when I turn the jukebox on. I have changed the fuses, disconnected everything from the amp (except...


we had the same problem with our 1015 vinyl omt, we replaced the ac/dc rectifier and the 2 big capacitors and the problem was solved. (it cost about 15 euro's) good luck!

Jan 21, 2011 | Wurlitzer Jukebox CD Player

1 Answer

Changer will pick up CD and spin for about three seconds stop, set still for about four seconds. CD will not spin again reject CD back into the rack. the above will happen again but during the four second...


This sounds like an issue with either your CD player, CD control board, or Selection and Credit Computer. I can help you troubleshoot further over the phone (and repair/replace whatever is necessary). My name is Rod and I can be reached at tech@wurlitzer-ohio.com. Please email me and I'll email you my telephone number.

Jun 18, 2010 | Wurlitzer Jukebox 1015 One More Time...

1 Answer

Hello i have a omt 1987 1015 lights power up but will not play when you select led shows record to be playing but does not play will not show credits or house hits have checked all fuses none blown have...


Is your 3 digit display on? If not, does the Z LED Flash when rotating the record carrier? If so, you may need to have your computer repaired. If the Z LED doesn't flash, check the 12 volt fuse in the amplifier. If you need your computer repaired or further assistance, please email me, Rod Stebelton, tech@wurlitzer-ohio.com.

Dec 27, 2009 | Wurlitzer Jukebox 1015 One More Time...

3 Answers

NSM Hyperbeam Wall mount Juke box


if you get error 61 it means check cd and exchange,or cd changer or at the most it could be the decoder board you could try jukeboxworld good site for manuals etc

Jun 03, 2009 | Wurlitzer Jukebox CD Player

2 Answers

Nsm cd wont play


I can't guarantee to solve this but hopefully I can give you some pointers.

ER 61 can point to 1 of 4 possible errors:

1. CD is not recognised
2. No CD in the player
3. CD defective
4. Player defective

When you loaded the CDs did you record the titles into the title memory? If not it is worth running this function first. For sake of time just run this for one disc first to see it is works.

If it still fails then try a different CD. Load the disc detail into memory again first tho.

If you have success with that then run the function for all discs.

Unfortunately if it still fails I think you will need to get a professional to give the player the once over.

Hope this helps.

Apr 28, 2009 | Wurlitzer Jukebox CD Player

5 Answers

Jukebox error


error 61 on the nsm is a cd read error nothing to do with the amp, clean laser lens with a cotton bud and spit not spirits etc just saliva, then make a blank selection and see if the laser emits red beam, if not then the laser is faulty, check connections etc, if it picks up the disc but does not spin it its the decoder at fault, places like act marketing london, jukebox showroom, capital coin, herondata sales or anyone operator within the amusement industry will gladly sell you an exchange unit, or just try the coinslot industy magazine online or order via wh smiths

Mar 04, 2008 | Audio Players & Recorders

4 Answers

Fisher and Paykel GW712 Washing Machine - beeping & flashing continuously


my gw712 washing machine will fiil up ok but then it wont spin properly it only spins a fraction then stops and starts beeping the second led from the left starts flashing. any help would be greatly appreciated.

Nov 11, 2007 | Fisher Paykel EcoSmart GWL15

Not finding what you are looking for?
Juniper Networks IDP Upgrade Kit for ISG 2000 system, including IDP Lic Key, additional memory, and 5-device NSM (NS-ISG-2000-IKT) Firewall Logo

362 people viewed this question

Ask a Question

Usually answered in minutes!

Top Juniper Networks Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Juniper Networks Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...