Question about HP DeskJet 845c Printer

Open Question

To change broken gear

How to open printer

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I get broken gear in my hp officejet pro 8500a


Someone pulled hard on jammed paper to remove it from the printer. This has broken the small plastic paper advancing gear on the left-hand side of the printer (have seen this mistake a number of times). The printer is broken and cannot be fixed, and it is time to purchase a new one. What you and everyone needs to learn from this is to NEVER pull hard to remove paper out of your printer. Be careful, and open the access doors to get to it.



We would suggest that you upgrade to an HP 8600 series printer and if you print more than 500 pages per month you purchase an AdaptiveInk continuous ink supply system (CISS). Adaptive Ink Continuous Ink Supply System Home Page Adaptive Ink HP Pigment ERC

Mar 12, 2014 | HP Officejet Pro 8500 Wireless All-In-One...

1 Answer

Empty carriage stuck in my HP 7500A printer


Hello,Lester Makang
Your carriage got stuck in service station,is there any noise coming from the right side of printer then there will be broken gear.
Power on your printer,after you got carriage jam error open cartridge access door and wait 5 second when you see that gears trying to move,use your hand to pull your carriage to left side.Don't use much force.If your carriage got free then install your print head and cartridges.If this will happen again then take it to service center they will change the service station or broken gear but the cost goes much high.

Nov 06, 2012 | HP Officejet 7500a E910 Multifunction...

1 Answer

Fuser open message not a broken gear


the fuser unit got a thermal fuse on need to replace. it over heat and the the power do not go throgh

Dec 02, 2011 | Brother MFC-8640D Printer

1 Answer

Scanner is not grabbing the paper


this like the problem is from printer roller, open your printer then check the printer gear, is there broken gear?if yes change it with new one
i hope this helpfull, please rate very helpfull or helpfull if you think this helpfull
thanks for using fixya

Jan 20, 2011 | Xerox DocuMate 262 Path-Through Scanner

1 Answer

Cannot feed paper for printing and there is noise in the roller printer


your roller gear was broken, open print case then change the gear, it may fix your problem
please rate my answer

Jan 18, 2011 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Before pulling in paper printer makes a gear slipping noise. sounds like plastic gears slipping. printer works ok otherwise


One of the gear in the roller mechanism is either displaced and not in alignment with other gear wheels OR the gear blades is broken. You have to take the assistance of technician from service center to open the printer and change the part. You can not do it your self.

Sep 15, 2010 | Office Equipment & Supplies

1 Answer

Brother mfc 9700 need to change toner cartridge but drum wont come off, how do i get this off safely and back on again?


If you open the door and the toner doesn't release, there may be a broken gear on the left side that releases it. The black lever on the left side of the door disengages the toner and when that doesn't pull freely the gear inside is broken and a shop needs to replace for you. If just the toner, you press the blue lever and lift the toner off of the drum.

Jan 19, 2010 | Brother MFC 9700 All-In-One Laser Printer

3 Answers

Printer labels do not advance when print is hit


CAUSE: my guess would be a stripped gear or a lack of prssure on the "pinch wheel" which would cause a loss of traction on the paper feeder.

SOLUTION: 1- change the stripped gear (if it's stripped)
2- add a layer of adhesive tape on the loose pinch wheel (if it's loose)

both solutions require to open case (to access loose wheel or stripped gear). To determin what the probleme is, try to run a print and try to move or pull gently on the lable ribon while in function. Two possible outcomes are that the gear will only "hook" in some areas if it's stripped. If it's loose the paper will only move while pulling on it.

Jul 24, 2009 | Brady ID PAL Thermal Label Printer

1 Answer

When I switch on copier then sow display bord "Swith main power off and of E051" Please solution... sambhu82@yahoo.com


This error code due to your machine gear had broken
this gear can change by only technician
because it in very critical area
if you open full machine then you can do
for change that gear you have to open machine from its manual feed stack bypass door.
firstly remove upper body cover
then open from front cover
then open front body cover
remove drum segment
remove toner segment
then remove pick up segment
then remove upper segment of pick up that was very critical
if break something or fit loose something your machine will be
not work
under that segment you will see one toothy plastic plate which moves with one small gear, that gear you have to change.
That its

Mar 20, 2009 | Canon ImageRUNNER 330s Copier

1 Answer

Clicking noise


the clicking noise is the gear fro the paper feeding roller. seems that the gear is broken, need to have it replaced.

May 21, 2008 | Brother MFC 8500 All-In-One Laser Printer

Not finding what you are looking for?
HP DeskJet 845c Printer Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...