Question about Honda Pressure Washer PSI 3000

2 Answers

Gx160 Pressure Washer runs fine for 20 seconds Then shuts off

I have a gx160 Honda Pressure washer Just started it for the first time this year.. Runs Great for about 20 seconds and shuts of oil levels look fine. ?????

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Check for stuck float, plugged fuel filter or fuel line. All tanks have a screen inside them to catch larger particles, and some also have a inline fuel filter. If everything checks ok, the passages inside the carb are plugged, follow the cleaning procedure outline in the manual to be sure you only have to do the job once!

Take a look at following link to see more solution to different small engine problems. http://solosmallengine.blogspot.com/

Posted on Jun 08, 2012

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 365 Answers

It could be several things...oil level, make sure its sitting on level ground...if not did you use StaBil when you laid her up for the season? If not, go to Advance Auto and buy "SeaFoam" and following directions run it for as long as it will run...make sure you have water running through the pump during tests!
Good Luck

Posted on Jun 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine runs but back fires then dies when put under load


Rebuild the carburetor. Just replace the old gaskets, diaphragms, needle and seat. You can get a rebuild kit from your local lawm mower repair shop. also, don't run last years gas and if you keep gas in the tank over the winter buy a winterizer and pour it in the tank when starts to get cold. Hope this helps!

Apr 12, 2014 | 5.5 HP GX160 Engine

1 Answer

Honda GX160 starts runs dies


How about the carb was it cleaned ???? It's definitely a fuel issue

Dec 16, 2012 | 5.5hp 6:1 Gear Ratio GX160 Engine

1 Answer

Northstar PW shuts off hot if washer is moved. Honda engine


Being petrol driven, it may have a mercury kill switch which puts a ground on the ignition circuit stopping the engine if you move it. Perhaps for safety in case you overturn the unit somehow.

Apr 08, 2010 | Northstar Pressure Washer 3000 PSI

1 Answer

Pressure washer with Honda GX160 5.5 HP OHV-Starts easily but...


what about the linkage between the governer and the carb. Is that working and not binding?

Dec 20, 2009 | Honda Pressure Washer PSI 3000

2 Answers

I have a honda gx 160 5.5 pressure washer. It's hard to start


do a full service on it , new spark plug /air filter foam , full oil change , also chane the oil in the pump end , carefully remove the carb bowl and remove any dirt/rust/water etc

ive seen gx160 engines last 10 years no problem and those were hire machines

hope this helps if it does please vote

Nov 13, 2009 | Computers & Internet

1 Answer

Honda GX160 runs fine for 5 minutes then dies like out of fuel.


I would look for the fuel filter. Blow it our. I know you have a new tank of gas, but you might want to empty it out and make sure the clean and put in new. Even with Stabil in the gas you might just have to much condensation in the tank

Sep 07, 2009 | Master Heaters MASTER HONDA POWERED...

1 Answer

Wont pull detergent


problem is that u have to use with lowest pressure i believe black tip

Jun 20, 2009 | Honda Maxus Pressure Washer MX5222

1 Answer

Engine keeps shutting down


Most Honda engines have an oil pressure switch that prevents engine damage due to low/no oil pressure. Make sure there is sufficient oil in the engine and that the wire is connected to the pressure switch.

May 28, 2009 | Karcher 2500 PSI Pressure Washer

1 Answer

Can't start the Honda GX160 5.5 HP Electric motor on my Chore Master 2400psi Pressure Washer. Got gas (checked through feed line), new spark plug, switch on, gas, choke ok, throttle a bit funky (about 12...


Is there an oil sensor unit if it is going bad it tells the engine the oil low and engine wont start. I had same problem with my pressure washer, i just unplugged the sensor unit and it started fine ever since

Apr 27, 2009 | Garden

2 Answers

Honda powered gx160 model pressure washer wont start


Buy a new plug, drain out all of the old gas and put in new gas, and take a look at the air cleaner. If the air cleaner is dirty replace it. There you now have a good spark, good fuel and good air. The engine should start. If it doesn't get some carberator cleaner spray and some starting fluid spray.

Apr 12, 2009 | Honda 8 HP Engine

Not finding what you are looking for?
Honda Pressure Washer PSI 3000 Logo

1,160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Garden Experts

John Trevino

Level 3 Expert

1383 Answers

JOHN LAPIER

Level 3 Expert

2428 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a Honda Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...