FTF2140E S GIVING BEEB SOUND AND. not working

Hi there
A couple of points.
Many system boxes no longer have built in speakers, and if they do they are very simple and simply used for POST errors and other alarms eg CPU fan failed, overheating etc. If there is a pattern to the beeps, you need to check against your BIOS codes to ensure nothing serious is happening.
If your system is working completely normally otherwise, then I would suspect an audio problem, which might be resolved by removing and re-installing the audio driver from the disk supplied.
Cheers

To change font in Epson LX-300+ Printer is as follows :

Step 1
Switch on the Printer.

Step 2
Hold the Pause Button for 3 Seconds (until you here a beeb sound).

Step 3
Now you see the pause LED blinks, now you press Font button to change the font (you here beeb sound on change of each font).

Step 4
After selecting the font press pause button once.

Step 5
Thats it now your font has been changed.

go to control panel, and use the utility System RESTORE, and put the last days that you know was working Good. and fix it.

God bless you

You may be subscribed to a voicemail system provided your telephone company. This system records messages when people call while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Unplug ur USB wires from ur mobo & try. Have u tried to reseat ur graphic card as well?

HI,

Switch on your computer and listen for a beeb sound.... if no beeb sound available then your Motherboard has a problem.

if beeb sound comes then switch off your computer and see for the loose contacts on motherboard.

eg. remove ram, clean ram socket and put back the ram

your problem may solved.

thanks
ehsan ([email protected])

maybe a hardware issue

Take out your memory modules and reseat them. One of them may not be in all the way.

AWARD BIOS BEEP CODE ERROR - 1 Long Beep - Memory Problem (Module not seated well)

To change font in Epson lx300+ printer,

1. Switch on the Printer,
2. Hold the Pause Button for 3 Seconds (until you here a beeb sound)
3. Now you see the pause LED blinks, now you press Font button to change the font (you here beeb sound on change of each font).
4. After selecting the font press pause button once.
5. Thats it now your font has been changed.

Unplug the power supply to the phone, wait 1 minute and plug it in again