Question about GE Profile PTWN6050MWT 27" Top-Load Washer with 3.6 cu. ft. Capacity, 4 Wash Cycles, HE Low-Water Wash, Infusor HydroWave System, PreciseFill, Handwash Cycle, Digital Countdown Display and EnerStar CEE Tier III Qualified

Open Question

Infusor Loose on GE Profile PTWN6050MWT

The infusor (used to be called an agitator) came lose on our GE HE Profile PTWN6050MWT. Looks like the bolt snapped. What is involved with replacing? Thanks

Posted by on

  • Rob Boswell
    Rob Boswell Mar 23, 2014

    Bolt wasnt broken, just very very few threads (must have stripped a few or???). Got a slightly longer screw, built it up with a couple of washers. Seems to be working.

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2468 Answers

SOURCE: Remove ge infusor

open the detergent snap lid and there are 2 half round ears turn these counterclockwise and it will lift out

Posted on Jun 18, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not spin the water out of the clothes


call a repairman sounds like a controller problem or transmission not getting final rinse signal

Mar 15, 2015 | GE Profile PTWN6050MWT 27" Top-Load Washer...

1 Answer

The infusor on my GE PTWN8050MWW Washer is detached. It is spinning loosely and floats up when the tub is filled. How do I fix it?


If the screw holding the infusor to the shank is not broken, more than likely the shaft broke. That is what happened to mine. The part is like 339 bucks and you need to tear it apart to install it. Sorry.

Jan 12, 2013 | GE PTWN8050MWW Washer

1 Answer

The infusor on my delonghi ESAM 4000/4200 is jammed down, how do I replace it


This worked for me. I had the main power switch, at the back, on. The machine was switched off with the power botton on the front. Then I disconnected the power plug and reconnected it. The machine resetted and works fine now.

Jul 14, 2012 | Coffee Makers & Espresso Machines

1 Answer

Remove ge infusor


open the detergent snap lid and there are 2 half round ears turn these counterclockwise and it will lift out

Jun 17, 2012 | General Electric Profile WPRE8150KWT 4.1...

2 Answers

Coin stuck in agitator. how is agitator removed


Normally you can take the top of the agitator off with the use of a screw driver or by turning couter clockwise. Once the top is off you should see a nut or bolt. Removing this will allow the agitator to be removed.

Nov 12, 2010 | GE Profile WPRE6100G Top Load Washer

2 Answers

Purchased a GE washer WHRE5550kww need to know why it isn't filling to the top 'holes' when set on large/super wash?


Hello....I don't know the answer to your question, but would like to know if you like this machine in general, are you happy you bought it??? Would you buy it again? Thanks

Aug 04, 2009 | General Electric WHRE5550H Top Load Washer

1 Answer

Agitator loose


Just reach down between the basket and the agitator, and lift really hard straight up. Be sure not to hit yourself in the head when it pops loose. GE agitators just snap on to the air-bell underneith. Be sure that bell isnt loose after you remove. Good Luck!!!!

Feb 02, 2008 | GE Profile Prodigy WPSE4200A

1 Answer

Agitator not washing clothes


check and make sure the agitator hasnt come loose or broken pull up on it and see if it comes out if not the bolt is in it, then grab ity and twist it do you feel any drag on it if not look under the machine and see if the pully has slipped down or if something looks loose. you should norice any problem

Sep 24, 2007 | GE Profile Prodigy WPSE4200A

Not finding what you are looking for?
GE Profile PTWN6050MWT 27" Top-Load Washer with 3.6 cu. ft. Capacity, 4 Wash Cycles, HE Low-Water Wash, Infusor HydroWave System, PreciseFill, Handwash Cycle, Digital Countdown Display and EnerStar CEE Tier III Qualified Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...