Question about Uniden UBC-3500XLT Handheld Scanner 25MHz-1.3GHz*

Open Question

Uniden 3500xlt battery error on screen or no battery

Runs ok with mains

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset my uniden ubc3500xlt


Scanner Reset: To initialize the scanner's memory, turn off the scanner. Then press 2, 9, and Hold while turning it on. Important! This deletes all preprogrammed data. You cannot restore preprogrammed data that has been deleted.

Jul 09, 2014 | Uniden UBC-3500XLT Handheld Scanner...

1 Answer

Battery error on screen


you need to replace the battery. they don't last forever. do a search an you can purchase an new battery without having to solder them in yourself.

Mar 22, 2014 | Uniden UBC-3500XLT Handheld Scanner...

1 Answer

No reception


Sounds like the radio in your base phone has quit working. Yes, you can buy another base but it has to be the same model s your existing one. After you get the new base follow the instruction in your users manual to unregister the old handset and then reregister them to the new base. Link to users manual
http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/D1760om.pdf

Jan 29, 2014 | Uniden Cordless Phone

1 Answer

Phone not working showing searching all the time battery ok


Please update the phone software or either restore it to factory settings.

Kindly revert back for any further clarification

Apr 12, 2012 | Uniden Cell Phones

1 Answer

Phone Not Working


Remove the battery from the back, wait 1 minute, then replace the battery. DO NOT HIT ANY BUTTONS. place the phone back on the main base unit so it can reregister.

Apr 09, 2010 | Uniden DECT 6.0 Cordless Phone ID

2 Answers

Regarding connecting old and new phone of same brand


1. Remove battery
2. Hold down the * and # buttons and reinsert battery. You should hear a long beep. If not retry. (This is a bit awkward but hold the handset upside down and it's workable)
3. Screen will be blank. Immediately press the right soft menu button.
4. Screen will report that EEPROM is clearing and then state EEPROM Clear Ok
5. Remove battery (yes again)
6. Reinsert battery (this time there's no need to hold down any buttons)
7. Handset will reboot with Welcome screen and then state that phone must be registered (this is the status a handset should be in from the factory)
8. Place handset on base and it will register as normal

Oct 12, 2009 | Uniden Cordless Phone

3 Answers

My Uniden cordless' handset and the base wont register Can it be bypassed or decoded


Here it is step-by-step: 1. Remove battery

2. Hold down the * and # buttons and reinsert battery. You should hear a long beep. If not retry. (This is a bit awkward but hold the handset upside down and it’s workable)

3. Screen will be blank. Immediately press the right soft menu button.

4. Screen will report that EEPROM is clearing and then state EEPROM Clear Ok

5. Remove battery (yes again)

6. Reinsert battery (this time there’s no need to hold down any buttons)

7. Handset will reboot with Welcome screen and then state that phone must be registered (this is the status a handset should be in from the factory)

8. Place handset on base and it will register as normal

Oct 26, 2008 | Uniden TRU8885 Digital Answering Machine

Not finding what you are looking for?
Uniden UBC-3500XLT Handheld Scanner 25MHz-1.3GHz* Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts

Jason

Level 2 Expert

211 Answers

John
John

Level 2 Expert

509 Answers

AnyMHz.com
AnyMHz.com

Level 2 Expert

500 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...