Question about Kato N Scale Led Lighting - Kit 6 Pack - White 11-210

Open Question

Instructions Need better instructions to add light kits to kato N-scale passenger cars. Instructions with kit no satofactory.

Posted by on

  • William Semanko
    William Semanko Mar 24, 2014

    KATO USA contacted and they gave Internet instructions to get lighting instructions. Thanks to everyone who replied.

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jyackle5
  • 8197 Answers

SOURCE: Good evening! We have a KATO P42 Superliner N

Here are the only manuals I can find for you.

http://www.digitrax.com/ftp/dn163k0a.pdf

http://www.modelrectifier.com/resources/trainsound/0001664.pdf

You can also contact MRC at link below.

http://www.modelrectifier.com/contactus/index.asp

Posted on Mar 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for instructions for a Revel kit F-111A 1/72 scale. Kit # 4303. Revel does not have it on their list.


hey come in numerous designs, colours and measurements. Optical and laser mice also give off extravagant lights that can brighten up a drab pc desk. 5 Sensible Ipad Accessories For Business And Workplace Use AmanStino

Jan 06, 2017 | Televison & Video

1 Answer

Do i need to add ground wires for a Lampholder kit?


The ground should be a green insulated wire from one of the screws on the fixture then attached to the bare ground wire with a wire nut.

Jan 31, 2014 | Electrical Supplies

1 Answer

On emerson casablanca ceiling fan, there is no voltage between blue and white wires for lighting kit power.


Check blue wire to bare ground.
Then check each wire to bare ground, with switch on and off.
Add a comment with result.

Sep 16, 2012 | Dryers

1 Answer

Need illustration instructions for the harrier II plus 1:48 scale kit


This is posted in wrong area---try to Google for that corp and kit to see if instructions can be found.

May 27, 2012 | Televison & Video

1 Answer

Just bought a 99 jeep cherokee, the heater controls sweem to be messed up. when the fan is on hot air comes from the passenger side of the car at the glove box vents, the drivers side blows cold air. ...


automatic climate control with dual controls?

Sounds like a broken drivers side blend door. Very common problem. Jeep has a repair kit that includes a new metal blend door and instructions on how to cut out an access in the HVAC housing. The kit also includes a new passenger blend door. If you want to replace both you',, need to pull the entire dash and then the HVAC housing which is a much better but more time consuming way of doing it. Pulling the housing is a huge job!

Jan 26, 2011 | 1999 Jeep Grand Cherokee

1 Answer

My 2003 Ford Explorer air conditioning is not blowing cold air. I can hear the compressor kicking on, but it only cool sometimes. Does it need freon? If so, How do I do that myself?


Your system is low on refrigerant and needs some more R134. Go to your local parts store and get a recharge kit which will come with a can of R134 and a hose to connect the can to the system. The fitting on the system will be on the passenger side of the vehicle, under the hood. Follow the instructions in the kit and you should be ok. Don't add more than you need to get the a/c blowing consistent cold air. Too much refrigerant can be just as bad and ineffective as too little.

May 24, 2010 | 2003 Ford Explorer

1 Answer

I need step by step instructions on how to bleed brakes on my 2005 toyota celica


If you don't have someone to help you you'll need to get a one man brake bleeding kit. The bleeding kit will take the place of the helper. IF you have a helper start with the rear passenger side wheel (furthest from master cylinder). Remove the wheel, have a helper sit in the vehicle and pump the brakes several times (motor off). Tell them to hold the pedal down while you open the bleeder screw. Tighten the bleeder screw before the helper releases the brake pedal to avoid sucking air back into the line. Repeat this process until the fluid flows out of the bleeder with no air. Then repeat these steps on each wheel. The order of bleeding is always furthest from the master cylinder. Rear passenger, rear driver, front passenger, and lastly front driver. After each wheel is done check the fluid level in the master cylinder and add as necessary. You don't want it to get low and **** air in from the cylinder.

Nov 06, 2009 | 2002 Toyota Celica

4 Answers

MIssing Edu Science Crystal Growing Kit Instructions


We lost the directions to EduScience Crystal Kit we from Toys-R-Us--here's a site from the company that actually puts the kits together. Lists directions for all there kits
http://www.nsi-intonline.com/prin.html

Aug 22, 2009 | Toys

Not finding what you are looking for?
Kato N Scale Led Lighting - Kit 6 Pack - White 11-210 Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kato Toys Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

ray gallant

Level 3 Expert

41409 Answers

Are you a Kato Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...