Question about Viking Kitchen Ranges
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: MAYTAG STOVE PROBLEM...NEED HELP
the broiler came on automatically??? not a sensor issue. sounds as if you have a broken wire perhaps, or a faulty control panel energizing the broil element w/o being prompted to. does it say its broiling when element comes on??
Posted on Mar 06, 2008
SOURCE: baking element
oh bleep, right? well, if you're lucky this will get you going again. 1. disconnect power to range. 2. remove back metal cover just above range power cord (usually 5 quarter inch hex screws) 3. look for burnt off wire leading to/from bake element. If yes, 4. strip ends of broken wire and splice with ceramic wire nut if no 4. bad news. replace ERC (electronic range control) you fried something on the board. It's got the clock display and all the electronics behind it.
Posted on Aug 29, 2008
If all the elements are dead, check for blown fuses/tripped circuit breakers.
There may be some in the range unit itself in addition to your electrical
If one element is completely dead on all heat settings, the control is
probably bad or there is a broken wire. If it is stuck on high for
all control settings or is erratic, the control is bad - replacements
are readily available and easily installed.
On ranges with push button heat selection, a pair of heating elements are switched in various combinations across 120 and/or 240. If some heat settings do not work, the most likely cause is that one of the heatings elements is burnt out although a bad switch is also possible. Kill power to the range and test the heating elements for continuity with resistance meter or multimeter.
For the lower baking element:
Again, check for blown fuses in the oven or tripped circuit breakers. The remove any wiring to the bottom element and test for resistance. If you get no reading (or a very high resistance) then your element is dead.
Posted on May 11, 2009
Put an oven thermometer in the oven on convection bake and check the actual temp inside. I'll bet it's not maintaining the correct temp in convection.
Posted on Jul 25, 2009
SOURCE: I have a problem with
We provide free diagnostic information when you tell us what brand and model number you are having issues with.
We are available from 7 AM – 7 PM CST. We also provide part removal/installation instructions for our customers when parts are purchased through us.
It is our goal to get you back up and running again ASAP, so please contact us when you need us to help you.
We look forward to hearing you and hope that you have a terrific day. Thank you, Ella
Posted on Mar 11, 2010
Tips for a great answer:
Mar 13, 2017 | Heating & Cooling
Sep 17, 2014 | Eaton Computers & Internet
Oct 25, 2011 | Kitchen Ranges
Mar 12, 2011 | Viking Ovens
Jan 31, 2010 | Jenn-Air JGS8850ADS Gas Kitchen Range
Jan 19, 2010 | Kitchen Ranges
Dec 12, 2009 | Viking VGIC485-6G Gas Kitchen Range
Sep 18, 2009 | Viking Ovens
Sep 03, 2009 | Kitchen Ranges
Dec 20, 2008 | Jenn-Air JDR8895AAS Dual Fuel (Electric...
Aug 01, 2017 | Viking Kitchen Ranges
22 people viewed this question
Usually answered in minutes!