Question about Konica Minolta Office Equipment & Supplies
How do I get rid of that display and what do you think the problem is?
If it is the waste toner bottle, you need to swap it out with a new one or carefully empty it into a plastic bag, be sure the plastic bag is sealed around the container or you will get toner everywhere! Or it could be waste in your finisher, like the staple debris tray or the hole punch debris tray, both are easy to access and empty
Posted on Mar 23, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1)Printer on, press Additional Functions, Scan, Copy, Scan
Now you should be in service mode from there for waste ink tank reset it is simalar to what has already been posted
2)Select Test mode which is like the last avalabe selection
3)Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button
The menu will now say EEPRON Clear
Select Ink count which is option (0) and press set
Then press Stop/Reset Followed by the power button and then wait for it to restart.
Posted on Dec 01, 2008
SOURCE: Waste ink near full
Here is a link that provides info about this problem. hope this helps.
Posted on May 03, 2009
The ink collector should be found underneath where the cartridges normally rests. Put some tissue paper on the ink padand let it absorb the ink. You might have to repeat the procedure a few times to get rid of all the ink.
Posted on May 18, 2009
This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select  PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
Skip step (6) since there is no [OK] key on F30 printers.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
Posted on Feb 13, 2010
Tips for a great answer:
Sep 09, 2014 | Konica Minolta Magicolor 5670EN Color...
Apr 16, 2012 | Minolta magicolor 7300 Laser Printer
Mar 18, 2011 | Konica Minolta magicolor 4650DN Laser...
Jan 14, 2011 | Office Equipment & Supplies
Jun 14, 2009 | Konica Minolta Minolta DI1610FP...
May 18, 2009 | Canon PIXMA MP170 All-In-One InkJet...
Aug 28, 2007 | Konica Minolta magicolor 5430 DL Laser...
90 people viewed this question
Usually answered in minutes!