Question about Casio EV-1000 10.4 in. LCD Television

2 Answers

Casio Remote will not work with NEW batteries.

I have owned my Casio EV-1000 B for a few years now however I really ever use it. My question to you is I have replaced the batteries in the WR-621 remote control however it still will not work. It's a pretty tight remote with no abuse however I can't use any of the buttons. What could I do to get it working.
Also, there is a plug on the side of the TV which is for a remote...??... Thanks

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Casio Remote will not work with NEW batteries.

After being dead for a long time, i finally figured out how to fix the casio wr621 remote.
with a new battery it still did not work.
since the remote it solid looking, i decided to peel off the front vinyl faceplate.
the faceplate covers the entire top.
it peeled off easily by putting a razor blade near teh wr621 stamping.
then i just peeled off the entire thing.
upon reapplying the sticky top vinyl, it worked fine.
not sure what i did- but it now works fine.

Posted on Dec 09, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 4,102 Answers
Re: Casio Remote will not work with NEW batteries.

The plug on the side of telly is for a cable remote which you can buy but these are pretty useless it sounds like the controll has got damp or has got greay if you think you can take the controll apart without damaging it then i sugest take the case off and clean behind the buttons this is usually the problem wipe the pads on the buttons then get some cloth that is clean then wipe over the circuit check for water damage then put it back together if this dont still work then you will need new controll as the originall are expensive to buy the best thing to do is buy an all in one remote this should solve your problem hope this is some help for you...........................

Posted on Oct 30, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Vizio XRT100 Remote not working

If your Vizio TV came with batteries for the remote, the batteries may not be fresh or may be no good. Also, the batteries may not have been installed properly and are periodically losing contact. Try using fresh batteries in the remote before concluding it is intermittently failing. If problems continue, go back to Walmart. There is a warranty on the TV so let Walmart make good on it

Mar 08, 2013 | Flat Panel Televisions

1 Answer

Remote only works within a few feet

Either the lens on the front of the set for the remote receiver is dirty etc or the infrared receiver in the set is bad.

The having to get very close and the fact more than one remote reacts this way means the trouble is the receiver is bad.

I have seen this a few HUNDRED times in my career.

Jun 02, 2012 | Westinghouse SK-32H240S Television

1 Answer

Can this be hooked up to a laptop computer

If your laptop has a monitor jack or a coaxil to tv input jack then you can.

Once hooked up to your device, go to main window screen
then righ click
then go to properties
then go to settings
Then drag the #2 box to the LEFT side of the #1 box, hit apply, then hit ok

Aug 17, 2009 | Casio EV-1000 10.4 in. LCD Television

1 Answer

LG 42 LCD no sound or picture

Did anyone find out the solution for this??????? I have the exact same problem with my LG 32 LCD. I only had it for a year and a half, and the green light blinks a few times and it shows no picture. Not even a red light when the tv is off. The same thing happened a couple weeks ago and by some miracle it started working again.

Jan 28, 2009 | Flat Panel Televisions

2 Answers

Vizio 32L, remote sensor malfunction

UNBELIEVABLE!!! mattymcmatt has the solution!!! I have had trouble with my Visio 26" remote ever since I got it several years back. Had to mess with the batteries, BUT Finally it quit entirely several months ago. I have tried everything... batteries, unplug TV, press each button on remote, etc... just bought a new remote, and tried all the above 'fixes' AGAIN nothing has worked. read mattymcmatt's fix of unplugging tv held down the on button on the tv for little over a minute, plugged tv back in and and VIOLA my remote is now WORKING!!! thankyou matty!!!!

Nov 27, 2008 | Vizio L32 32 in. LCD HDTV

1 Answer

Need remote codes ??

Hey Howeiw, I know that posting links doesn't help majorly, but I was unable to Find an "EV-1000 10.4 inch LCD Television" The closest I could find was just an EV-1000B. But that is not the same model. If you take some time when you have a chance, and visit, That site has ALL of the Remote Codes for all Cable Systems.

Hope this Helps. - Evolution

Jul 14, 2008 | Casio EV-1000 10.4 in. LCD Television

2 Answers

Remote controll

they have everything

hope this helps

Apr 10, 2008 | Hyundai Q320 32 in. LCD Television

1 Answer


there seems to be alot of the same problems with this tv. you can try leaving it unplugged for 30 mins and leave the batteries out of the remote for 15 mins to see if that would work. i found a # you can call for mintek products 1800-838-3315.
good luck.

Feb 12, 2008 | Flat Panel Televisions

2 Answers

EV-1000B TV Remote

Codes for all Casio TVs are available here However, they are all in Japanese, so you'll have to run it through Google's translate service.. Hope that helps..

Jan 27, 2008 | Casio EV-1000 10.4 in. LCD Television

Not finding what you are looking for?
Casio EV-1000 10.4 in. LCD Television Logo

351 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Flat Panel Televisions Experts


Level 2 Expert

61 Answers


Level 3 Expert

6993 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Casio Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides