Question about HP Officejet J5780 All-In-One InkJet Printer

1 Answer

Printer won't print. There are no go, ready, or

Printer won't print. There are no go, ready, or on-line icons/buttons available from the control panel or printer panel.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • HP Master
  • 1,996 Answers

See link here., or possibly here.
Is the printer installed properly? Did you connect the usb cable prematurely? See instructions here. or here.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Posted on Jun 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Darker print


Enter the Setup Menu from control panel and modify the Darkness value. You have to increase the value and then Save the changes and exit the menu. On control panel Buttons you find the role of each button in the control panel. You can use the User Manual. There is an User Manual available for download from Zebra website. You will find there precious information. The manual is very explicit and you will learn how to maintain your printer and how to troubleshoot some common errors. Eventually clean your printer, assure to put the supplies on the right path, close the printhead and press Pause to enter in Ready state.
http://www.zebra.com/content/dam/zebra/manuals/en-us/printer/105sl-ug-en.pdf

Dec 05, 2013 | Zebra 105Se Thermal Printer

1 Answer

Printer is paused all the time


Hello, sounds like your drivers are messed up, reload them to the computer or the connection cable maybe bad. If neither of these fix then the printer is bad.

Sep 05, 2012 | Canon PIXMA MX870 Wireless Office...

1 Answer

WHEN I WONT TO PRENT MY PRENTER TOLD ME THAER IS NO SOFTWER MY PRODUCT : oPTRA t 610 WHEN I WONT PRENT I TURN OFF & ON oR OBEN THAE DOOR


Default Printer Issue
The wrong printer is set as the default. See the image below for an illustration.
pattlnk_1132009_021-enus32058def.jpg
What to do
Open the Printers or Printer and Faxes folder and locate the correct printer icon. To do this:


    1. -In Windows XP, click Start > Settings > Printer and Faxes (or Start > Control Panel > Printers and Faxes).
      -In Windows Vista, click Start > Control Panel > Hardware and Sound > Printers.

    2. Right-click on the printer icon, and click Set as Default Printer. A check mark displayed above the printer icon now identifies it as your default printer.

    3. Try printing again.

Topic 3: Printer is "Offline"
The printer is set to Offline and the printer icon appears washed-out. See the image below for an illustration.
pattlnk_1132009_022-enus32058ofln.jpg
What to do
Open the Printers or Printer and Faxes folder and locate the correct printer icon. To do this:

  1. -In Windows XP, click Start > Settings > Printer and Faxes (or Start > Control Panel > Printers and Faxes).
    -In Windows Vista, click Start > Control Panel > Hardware and Sound > Printers.

  2. Right-click on the printer icon, and select Use Printer Online.

  3. Try printing again.

Topic 4: Printer is not Ready
The printer is in an "Intervention Requested" state (e.g. paper jam, paper out) but no Windows print error notification message is displayed.
Explanation
The print job cleared the print queue. This means the print queue icon has disappeared from the notification area ('systray') of the task bar. The printer is holding the job, however, until the the printer is returned to a ready state.
What to do
Check the printer LCD, or operator panel menu, to verify that the printer is in a ready state. If not, return it to the required status.
Topic 5: Printer is Paused
The printer or print queue is paused and the print queue icon remains in the notification area ('systray') of the task bar.
Explanation
This is typically an end user error. Dragging the mouse cursor over the print queue icon in the notification area will reveal (1,2,3) document(s) pending for (User name).
What to do

    1. Double-click on the print queue icon to open the print queue. (This may also appear as a small printer icon in the lower-right notification area of the task bar.)
    2. Click on Printer in the upper left-hand corner of the menu bar.
    3. Is there a check mark next to Pause Printing?

      -If yes, click on Pause Printing to turn off this Windows feature.
      -If no, confirm that there is a check mark next to Set As Default Printer and make sure Use Printer Offline is not selected.

Topic 10: Windows Print Spooler Issue
A problem with the Windows print spooler is preventing successful printing.
What to try
Stop and start the Windows print spooler. To do this:

  • -In Windows XP, click Start > Control Panel > Administrative Tools > Services, click on Print Spooler, click on Stop the service, and then click on Start the service.

  • -In Windows Vista, click Start, type services.msc in the Start Search box, and then click services.msc in the Programs list. Right-click on Print Spooler, and then click Stop. Finally, right-click on Print Spooler again, and then click Start.

Remove the first print job from the print queue. To do this:

  1. Double-click on the print queue icon to open the print queue. (This may also appear as a small printer icon in the lower-right notification area of the task bar.)

  2. Click on the first job listed so that it is highlighted.

  3. Click on Document in the top menu bar.

  4. Click on Cancel.

  5. Click Yes when you see: "Are you sure you want to cancel the selected jobs?"

Click here for illustration.
Topic 11: Other Issues
Other possible causes of a print job not printing include:

  • -USB connection problem if locally connected only.

  • -Firewall issues preventing communication.

  • -Workplace virtual private networks (VPNs) preventing communication. VPN tunneling may be required to ensure successful communication. Enabling this feature may require network administrator approval and assistance.

  • -Document formatting.

  • -Driver settings.

  • -Application-specific issues relating to the application's Printer Setup.

Topic 12: Last Resort
If you have tried all of the above suggestions to no avail, try the following:
  1. Reboot your computer and try printing again.
  2. Turn the printer off and on, and then try to print again.
  3. Install a different printer driver, e.g. PCL, PostScript, HBP, or XPS driver.

Dec 14, 2010 | Lexmark Optra T610 Laser Printer

1 Answer

How do i get printer working


Hi,

Are you able to print test page from Printer ?
This will help us diagnose and isolate the issue further
To print self test page ( Demo page ), do these steps below

Press the right arrow button simultaneously. It should start printing the demo page.
If this works fine, this could possibly be an issue related to print jobs stuck in queue.

To clear print job stuck in Queue
Click on Start button
Click on Control panel
Click on Printers and Faxes
Check for HP Laserjet Printer icon
Right click on the printer icon and Click Cancel all documents
Once you have done the above step, disconnect the printer from PC ( if using usb ) or turn printer off

Restart your PC/laptop
Check under printers and faxes folder if the Printer status shows Ready and 0
You are ready to print

Nov 02, 2010 | HP Color LaserJet 2600n Printer

1 Answer

How to solve 'error S01'?


1. Verify USB cable is connected directly from USB port of printer and the USB port on back of computer. If not, connect directly to both the printer and computer and try to print. If the printer does not print, go to step 3.
2. VERIFY THAT THE BROTHER PRINTER IS SET AS DEFAULT
This is especially important if you use the print icon to print from within applications. If the Brother printer is set as the default printer, it will have a check mark. If it is not set as default:
To set your Brother machine as the default printer, RIGHT CLICK on the Brother printer and select SET AS DEFAULT (PRINTER).
3. VERIFY THAT THE PRINTER STATUS IS READY AND THE PRINT QUEUE IS EMPTY
A. Click on START, RUN
B. Type: CONTROL PRINTERS and click OK.
C. Locate the Brother printer in the list and hover your mouse over the Brother printer icon. Below is an example of what you may see:
Status: Ready (Could also state: USE PRINTER OFFLINE or PAUSED)
Documents: 0 (Could be any number)
D. If there are any documents waiting in the queue, right-click on the Brother printer and select CANCEL ALL DOCUMENTS, depending on your operating system. This should clear the queue.
E. If the status states: USE PRINTER OFFLINE, right-click on the Brother printer and select USE PRINTER ONLINE depending on your operating system. This should set the printer driver ONLINE.
F. If the status states: PAUSED, right-click on the Brother printer and uncheck PAUSE PRINTING. This should allow the printer to resume printing.
G. If the status is ready and no documents are in the queue, attempt to print the Windows test page. If not successful, verify the selected port. If USB is the selected port follow step 4. If USB is not selected,change the port to USB, then attempt to print the Windows test page. If not successful proceed to step 4.
4. Turn the printer OFF.
5. Close any open programs.
6. Click Start, Run, type: control printers
7. Right click Printer, left click Cancel All Documents (if available). Confirm if necessary (click OK).
8. Right click Printer, left click Delete. Confirm if necessary (click OK).
9. Left click File menu, left click Server Properties, left click Driver tab, left click print model name, left click Remove button, click Confirm.
10. Close the Print Server Properties window to return Printers and Faxes window.
11. Check that the USB cable is properly connected at both ends.
12. Turn the printer ON.
13. Wait until printer has ready light or green status, watch the Printers and Faxes window to see if printer is automatically reinstalled.
14.a. If printer was automatically reinstalled, right click Printer icon, left click Properties, left click Print Test Page button. If the printer is not automatically reinstalled, call Brother Customer Service at 1-877-Brother (1-877-276-8437).
b. If printer was not automatically reinstalled, try a new USB cable. Ifthe printer still is unable to print, call Brother Customer Service at1-877-Brother (1-877-276-8437).

Nov 02, 2010 | Brother HL-5270DN Laser Printer

1 Answer

No printing, printer says ready, will test print from menu button


Go to my computer, click on control panel, click on printer/fax and see what is set for default. What ever printer icon that says ready, right click and set as default.

Mar 11, 2010 | HP LaserJet 4 plus Printer

2 Answers

Canon IP8500 Ink Absorber is Full


To reset the ink absorber is almost full:

1. Remove print head by following manufacturer procedure (available at www.canon.usa.com.
2. Turn off printer.
3. While pressing the Resume/Cancel button, press and hold the Power button. (Do not release the buttons. The Power LED lights in green to indicate that a function is selectable.)
4. While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)
5. While holding the Power button, press the Resume/Cancel button 2 times. Then release both the Power and Resume/Control button.
6. When the Power LED lights in green, press the Resume/Cancel button 4 times.
7. Turn printer off. Then replace the printer head using manufacturer's procedure available on line.
8. The printer is now reset and you are ready to print.

Larry

Jun 03, 2008 | Canon PIXMA iP8500 InkJet Photo Printer

Not finding what you are looking for?
HP Officejet J5780 All-In-One InkJet Printer Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...