Question about Kenwood KDC-716S CD Player

1 Answer

Kenwood kdc-x811 faceplate quit responding.

I just re-installed this stereo in a new car I bought. Everything worked as it should up until about three days after. I drove to work listening to the stereo and it worked fine.. after getting off work 8 hours later, the player opened and started playing the disc I had in, but the face wasn't illuminated nor was it responding to any commands. The remote would make the red light blink but wouldn't do anything either. I hit the reset button thinking it would work and now nothing. I'm assuming this is because its in code mode but I can't enter the code because no buttons work. Can anyone help? I tried disconnecting the power already and it didn't work.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Call Kenwood they can give you a code to enter by using the remote

Posted on Mar 22, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car stereo installion


I think you left the yellow wire from the kenwood disconnected

Mar 05, 2013 | Kenwood KDC-BT752HD CD receiver

1 Answer

How do I unlock my Kenwood KDC-MP528 car stereo


To reset the code do the following:
1) Turn on the car.2) The faceplate rotates out and the CODE - - - - prompt appears.3) Press >>' and Auto keys simultaneously on the faceplate and hold for 4 seconds. (If the faceplate rotates back into the console push on the upper left top edge of the faceplate and it will flip back around. Press the Eject button and then try it again.)4) The screen will still say CODE, but the - - - - will disappear! When this happens press the 5 key on the remote twice and it enters a K on the display on the faceplate. Hit the >>' key on the faceplate.5) Press the 2 key on the remote three times and it enters a C on the display on the faceplate. Hit the >>' key on the faceplate.6) Press the 2 key on the remote once and it enters an A on the display on the faceplate. Hit the >>' key on the faceplate.7) Press the 7 key on the remote twice and it enters an R on the display on the faceplate. Hit the >>' key on the faceplate.8) The radio goes into All Off mode and you are set! Hit the SRC button on the faceplate to select CD, Radio, etc.
For further assistance please let me know.

Feb 17, 2012 | Kenwood Car Audio & Video

1 Answer

Need to get the security code for Kenwood KDC-608OR


ok I just found this info online and they say it came from the service manual for that stereo so I hope it helps:

You will need a Kenwood RC-410 remote control. This remote works on KDC-519, KDC-X859, KDC-319, KDC-4019, KDC-MP919, KDC-X759, KDC-419, KDC-X459, KDC-MPV619, KDC-MPV7019, KDC-2022, KDC-2022V, KRC-435, KRC-535 and KDC-X959

To reset the code do the following:

1) Turn on the car.
2) The faceplate rotates out and the CODE - - - - prompt appears.
3) Press >>' and Auto keys simultaneously on the faceplate and hold for 4 seconds. (If the faceplate rotates back into the console push on the upper left top edge of the faceplate and it will flip back around. Press the Eject button and then try it again.)
4) The screen will still say CODE, but the - - - - will disappear! When this happens press the 5 key on the remote twice and it enters a K on the display on the faceplate. Hit the >>' key on the faceplate.
5) Press the 2 key on the remote three times and it enters a C on the display on the faceplate. Hit the >>' key on the faceplate.
6) Press the 2 key on the remote once and it enters an A on the display on the faceplate. Hit the >>' key on the faceplate.
7) Press the 7 key on the remote twice and it enters an R on the display on the faceplate. Hit the >>' key on the faceplate.
8) The radio goes into All Off mode and you are set! Hit the SRC button on the faceplate to select CD, Radio, etc.

Above information source = http://techbybucky.blogspot.com/2008/01/how-to-reset-security-code-on-kenwood.html

Jun 19, 2011 | Kenwood Car Audio & Video

1 Answer

Faceplate wont work


the new face plate needs to be coded to the deck. with the face on you need to press and hold presets #1 and #3 at the same time. keep on holding and press reset continue to hold #1 and #3 until the unit is in all lighting mode. press AM button one time. p-rom ok will display. press and hold #6 and reset at the same time. continue to hold until display comes on.

Jul 18, 2010 | Kenwood eXcelon KDC-X879 CD Player

2 Answers

Kenwood excelon kdc-x815 display screen no power


recently bought a kenwood kdc-815 car radio from a swamp met. bought it with no security code need security code

Apr 08, 2008 | Kenwood KDC -X815

Not finding what you are looking for?
Kenwood KDC-716S CD Player Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4944 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...