- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I'll start by saying the suggested answers you see are provided by the website and may not have anything to do with your actual question. There is a 30amp and a 40amp fuse in the box near the battery that protects the key switch. You need to make sure those fuses have power to proceed. The flashers, horn, and other circuits are not controlled by the key switch.
switch on the bluetooth on the phone and keep it searching for new pairing devices, now hold the Vol+ key and power button of the headset and start the headset, the pairing should complete if still asks for pass key type 0000
If your battery is not charging there could be two reasons for the same . First the battery has exceeded its lifetime and requires a change or is faulty
Second your ac adapter is not giving enough charge to charge the battery.
Open the battery health meter , by pressing the Fn+ F3 key on the keyboard . check if battery reports any error message.
Shutdown the computer and disonnect the Ac adapter and the battery and press the power button for 10 seconds
Reconnect both the Ac adapter and the battery
power on the system and tap on the f2 key slowly on the left side of the screen , look for the option that says battery info.
Check what is the status of the Ac adapter and is the battery showing charging.
if the Ac adpater shows as none, then adapter needs a replacement otherwise the battery.
First, the dock will charge only the batteries that came with the device; not other rechargeable batteries. Be sure that the Kodak battery is inserted correctly, the door is closed securely, and that the camera is securely seated in the dock with the power cord secure to both the dock and the AC outlet. The USB cord does not supply power to the dock. Hope this helps. DigiChick