Question about Durabrand PDV-709

Open Question

Battery does not hold a charge

Plugged it for 24 hours and it does nothing.

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Batteries wont charge . Charger plugged in meter reads 13 volts . Not plugged in reads 5 volts. tried charging for 24 hours .


Your batteries may be old and no longer able to hold a charge. This can happen even on fairly new batteries. Especially if they sit for a period of time.

Mar 27, 2015 | Pride Sundancer 3 Wheel Electric Scooter

1 Answer

Battery will not charge


Your battery may be defective and cant hold a charge. Make sure the unit is receiving power and if so replace the battery.

Dec 15, 2014 | RCA RCT6691W3 9" 8 GB Wi-Fi Black Tablet...

1 Answer

Standby power does not work


The question is confusing. What did you replace the battery in, the battery back up power supply or the transmitter? The 300MC is just the transmitter and changing that battery has nothing to do with whether the main power unit will function if you unplug it. Now, if you replaced the large battery in the opener itself, it needs to fully charge before it will function properly so give it about 24 hours to charge with the power cord plugged in and then try again. It should work IF you attached the wires to the CORRECT terminals on the battery, positive to positive and negative to negative. If you did not, reverse them, allow the battery to charge 24 hours plugged in and try again. If you installed it in reverse there is a chance you fried the circuit board and that means you will not be able to use the backup feature although the opener may function normally without it.

Sep 14, 2014 | liftmaster Chamberlain Garage Door Opener...

1 Answer

I have a DCR PC 100e which I have not used fir some 10 years. I suddenly want ti reusebit to record a soccer match and would like to activate the Digital Zoom function. But when I push the Menu dial disk...


I don't have a DCR PC 100e, but be aware the main battery in the camera also can be dead. If so, the voltage needed to charge the internal battery, can't be reached. Normally the main battery, should be capable of recharging the Vanadium-lithium battery, without the charger connected.
Just sit out the 24 hours, but be prepared to replace perhaps both batteries. The main and the internal. Not sure you can replace the internal battery yourself.

Sep 05, 2014 | Cameras

1 Answer

My htc freestyle wont turn on


1.Check the device's battery level for at least two bars of strength.
2.If the battery level is low, charge the battery.
3.If the issue is not resolved, remove the back cover.
4.Remove the battery.
5.Wait 10 seconds.
6.Press and hold the W key.
7.While pressing down the W key, re-insert the battery.
•The device restarts and after approximately 15 seconds, the 'Recovery' screen appears
•Release the power button but *continue holding the home button*, for another 30 seconds.
Step
Thanks

Nov 05, 2012 | HTC Freestyle Smartphone

1 Answer

How do I set the current time on the Woods Digital Timer Model#59203?


78a8604.jpgWoods 59301
Manual for 59301
http://waterheatertimer.org/pdf/Woods-59203.pdf

Plug timer in wall for 1-2 hours so rechargeable battery charges
If display does not show after 1-2 hours, the battery is dead and timer is no good

After 1-2 hours, you can remove timer from wall to program

Press reset (R) with paper clip to clear memory

Select format: Press and hold Clock button until 12 hour or 24 hour shows on display, then release
Press hour button to change display to 12H
press Clock button and display returns to normal
AM shows in upper left corner

Set current time:
Press and HOLD clock button
While holding clock button, press hour button and minute button until display shows current time
Release clock button
Press and HOLD days button until current day shows in display
Release days button

Further instructions to set ON-OFF times are in manual (click link shown above for manual)
If you have problems, re-post additional question.

Oct 17, 2010 | Woods Indoor 24 Hour Digital Timer (59203)

1 Answer

Old or New battery not charging...or so it seems (Discovery 4XXX)


the charger is not charging its not putting any thing out into the batterys the charger clock is working but your not getting any charge from it

Mar 21, 2010 | iRobot Roomba 4210 Bagless Robotic Vacuum

1 Answer

3 month old new phone. samsung tocco lite. battery problem


1) faulty battery - you'd need to get a replacement from the manufacturer (should be free if still under warranty)
2) when you initially charged the battery after purchasing, if you used it at all before it was completely charged it won't hold a charge.
3) if you live or travel in mountain area, phones lose battery power quicker due to an increase in elevation and distance from nearest tower.
4) if phone has been exposed to moisture or direct sunlight for an extended amount of time, it can damage the phone's ability to hold a charge.

honestly, your best bet is to replace the battery & allow it to charge for 24 hours in "off mode". if the problem persists, then send it in to be repaired.

Mar 19, 2010 | Lands Phones

1 Answer

My MPC t2300 laptop wom't turn on.


The Transport T2300 has an internal battery that will run the laptop for several minutes after the main battery goes dead. This feature allows you to save your work and shut down safely. If you run the laptop until both batteries are dead, even a brand new battery can't start the unit again. You have to follow this procedure:
1.Unplug power cord

2. Remove any attached periphal components including the cd rom and/or floppy disk module if you have one. Both remove with a push button switch located on the bottom of the unit.

3. Plug in power cord and charge the unit for a minimum of 24 hours straight. 30 hours is better. This whole time will be spent slowly recharging the internal back up battery.

4. Once that is done, unplug power cord again and reinstall any floppy/cd drives. Plug power cord back in now and charge for at least 24 hours again.

If your backup battery is dead, you can't charge the main battery or turn the unit on. The longer you charge, the better. We had one unit here that had to be on the initial battery backup for 72 hours before it finally took hold. Then, one overnight recharge on the regular battery and all was well.
If you need drivers or manuals for the 2300, all are available on cd at mpcsupport@cox.net for around $9.50 including shipping, handling, and owners manual

Apr 11, 2009 | MPC Computers TransPort T2300 Notebook

Not finding what you are looking for?
Durabrand PDV-709 Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Durabrand Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74185 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Durabrand Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...