I have a Dell all in one 922 printer When I try to print the computer says that the printer is out of paper when paper is loaded in the printer. It does not print and does not even feed the paper. It prints sometimes but not all the time. I clean the grab roller. Is there a sensor in the printer that tells it that there is paper loaded? Thanks in advance for your help.
An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: I have a Dell all in one 922 printer When I try
If your device is out of warranty, I'd suggest to clean the rollers again completely. What I mean is to remove the scanner lid and back cover, then clean all of the rubber rollers gently with alcohol and swabs.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
" Unplug the printer cable from the computer.
" Unistall the printer drivers from Device manager and also unistall the all the printer appications
" restart the computer
" Click here and slecet the operating system and download the drive
" after installing drivers and software it will ask you to connect the printer.
" then you can connect the printer and and try to Print the test page.
Do a reset: Dell Printer reset 1.With the power on,unplug the power cord from the wall socket. 2.Disconnect the power supply from the back of the printer. 3.Wait 15 seconds. 4.Reconnect the power supply to the back of the printer. Plug the power cord back into the wall socket.
Dell Printers To run a nozzle clean, perform the following steps: 1.Verify the All-In-One Printer 922 is powered on and connected to a computer. 2.Verify that the paper support (input tray) has clean, plain white paper loaded. 3.Press the Menu button. 4.Press the Down button until Mode: Maintenance appears on the LCD screen. 5.Press the Menu button. The Dell 922 Maintenance Menu appears on the LCD screen. 6.Press the Down button until Clean Cartridges appears on the LCD screen. 7.Press the Start button. The AIO 922 prints the cleaning page. This process cleans the ink cartridges and resolves many print quality issues.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it. Thanks, Joe
My dell photo aio 922 says there a communication problem and i try to print i do everything it tells me to do for exaple recconect the usb restart computer and try and take the printer plug out but still i am haveing the same problem
You will have to use the New Dell 922 VISTA drivers and not the XP drivers in order for it to work with your Vista Loaded PC. The new drivers for the 922 under Vista are available for download at Dells website. Check out this link http://support.euro.dell.com/support/topics/topic.aspx/emea/shared/support/dsn/en/document?c=ed&docid=314972&l=en&s=bsd
Hope this helps.
it's unusual to have same problem if completely uninstalled printer(removing printer, then uninstalling,after which use printer installation cd then re connect printer when prompted).
If you have a spare usb port install software then connect printer to a different usb port.
Lastly try; go to printers and faxes folder>right click on printer icon>properties>advanced, then click the radio button 'Print Directly to the Printer' and see if it prints.
Also make sure this printer is set to default printer
Try an updated driver, if any,from the Lexmark web site, as they are the same printer without the Dell logo.
Your rating is appreciated.