Question about Sharp AL 800 Copier

1 Answer

DRUM LIGHT ON EVEN AFTER NEW DRUM INSTALLED. HOW TO RESET DRUM LIGHT?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 41 Answers

Press the following

Clear / density select / clear / density select

scroll to 24 and press enter.restart and away you go

Posted on Jun 18, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
marquitojms
  • 1 Answer

SOURCE: SHARP AL-2040CS Drum reset code

c - auto - c - auto - (machine is off) 24 - start - 07 - start (000 blink) - 4x botton c . Finish ok.

Posted on Apr 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is the drum error message on after new drum installed and won't print


Hello, you need to reset the Drum Unit life:
After changing a DR2000 drum unit in a Brother HL-2040, the printer's page count needs to be reset. This will turn off the drum warning light on the printer.
Simply open the front cover, and hold the "GO" button until all four LED's are lit. Release the "GO" button and close the front cover.

Jul 28, 2014 | Brother HL-2040 Laser Printer

1 Answer

I recently noticed a message that said "drum end soon" on the screen portion of my printer. With that I went and replaced the drum and toner. The problem is this: The "drum end soon" message never quit...


Hi,

This message would continue to appear if the drum unit counter was not reset when you installed a new drum.
To reset the drum unit counter, follow the instructions below:
  • Press Menu on the Control Panel.

  • Press the Up or Down Arrow key to select Machine Info..

  • Press OK.

  • Press the Up or Down Arrow key to select Reset Menu.

  • Press OK.

  • Press the Up or Down Arrow key to select Drum.

  • Press OK.

  • Press 1 to reset the drum unit counter.

Thank you !!

Jun 09, 2010 | Brother MFC 7840W Printer

1 Answer

Our fax machine says "change drum soon" even though we changed it yesterday. What is causing this? Thanks


When you installed the new drum, there is a sheet in the box that tells you how to reset the drum life counter. Did you perform this procedure when you installed the drum?
If you don't have it just open the front cover and press options then select 1 for drum replacement.
Good Luck and thank you for using Fixya.

Feb 25, 2010 | Brother IntelliFax-2820 Laser Fax

2 Answers

I've recently installed a new Brother toner, but the drum light is flashing and the Brother hl 5140 printer won't print


DRUM UNIT "spent"
It can be reset if the printing quality is good
To reset the drum follow the instructions below:
Press the cover release button and then open the front cover of the printer.

Press and hold down Go button until all 4 LEDs are lit. Once all 4 LEDs are lit, release the Go button.

Close the front cover.
Make sure that the Drum LED is now off.
Caution: Reset the drum counter only when you replaced the drum unit with a new one.

Oct 09, 2009 | Brother HL 5140 Laser Printer

1 Answer

Just installed a brand new $164 drum and the drum light is still blinking


you either have a service call error or you did not reset the drum

the instructions came with drum.

Jun 24, 2009 | Brother HL 1440 Laser Printer

2 Answers

Yeah, I have the HL-5250DN printer. The light


Hi there -

The reason the drum light keeps flashing is that you have to "reset" the machine after you've installed a new drum. To do this, I believe all you have to do is make sure the printer is on and then push and hold down the "GO" button a few seconds and then the flashing will stop. This will "reset" the printer to recognize you've installed a new drum. I'm going from memory on that, but I believe that's correct. It's a really simple solution. Good luck!

May 15, 2009 | Brother HL 5250DN Laser Printer

1 Answer

Drum light flashes


its the sensor, its not aligned to specs. make sure the drum is in its proper space then, unplug for 5 min to reset the control panel.

Feb 11, 2009 | Brother HL 5140 Laser Printer

2 Answers

J2 drum cartridge light no after replacing drum


J2 is the indication that the Drum Cartridge life has elapsed. The possibly exists that the Customer has installed a New Drum Cartridge. The Customer would be directed to change their Drum Cartridge by their User Guide. This action on the part of the Customer will cause the Drum Reset Switch to actuate for a moment when the Side Door is closed. This is with the provision that the Drum Reset Circuit is working properly. That momentary actuation of the Drum Reset Switch, being actuated by the New Drum, resets the Drum Counter. Should something be faulty with either the reset mechanism on the New Drum Cartridge, or the Drum Cartridge reset Switch circuit, the Counter will not reset. Note: A new Drum Cartridge will NOT reset the Drum Counter unless the machine is holding a J2 presenton the display. The first revolution of the Drum will render the Drum Cartridge used. A Used Drum Cartridge will NOT be capable of resetting a J2. Again, one revolution of a new Drum Cartridge will render it to be a used Drum . Cause:

Apr 25, 2008 | Xerox WorkCentre XD130DF Laser Printer

1 Answer

Print has quit working at all


Please send to me your email address and i well send to you the error status or print the even log to see the even code number if possible

Apr 11, 2008 | HP LaserJet 2550L Printer

3 Answers

Brother HL-5240 drum light flashing


Normally clearing the drum count the machine has to be on open front cover as if to change the drum press and hold the button in for about 10 second then release and shut the door. This should reset the count if not please get back to me and I'll check the service manual to see if anything in that.

Thanks J

Jan 29, 2008 | Brother HL-5240 Laser Printer

Not finding what you are looking for?
Sharp AL 800 Copier Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

255 Answers

k24674

Level 3 Expert

7993 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...