Question about Sony Network Walkman NW-HD3 MP3 Player

Open Question

Power cord and ac/usb adaptor

Hi there! As both items were stolen and only the usb cable was left, cannot find them anywhere but as complete accesories kit with mp3 player. Obviously, my mp3 is dead if cannot charge the battery. Where else can I look for the power cord and the adaptor connecting both the usb and power?

Posted by on

  • Jaime Vazquez
    Jaime Vazquez Mar 21, 2014

    The adaptor is BCA-NW-HD3

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: mp3 will not connect with my computer

I'm pretty sure I fixed a similar problem. Go to your device manager on your PC and uninstall the walkman driver. After this is complete just plug the walkman back into you Pc and the plug and play will download the driver again. This worked for me. My operating system is Windows vista.

Posted on May 29, 2009

Ad
  • 1 Answer

SOURCE: MP3 Player won't charge or turn on

ok.. put Hold on , reset then play :D itr will turn back on

Posted on Jul 01, 2009

Frostangel
  • 5 Answers

SOURCE: Refuses to connect with the computer

If your player is not charging then:
Your charger may gone short-circuit that is why your player is not energizing and not able to support the needed battery energy.

If your player is not accessible by a computer or
your unable to download anything to it then:
Your player memory may have gone full or it needs reformatting. Your may downloaded a bug like a song or etc..

Posted on Aug 03, 2009

  • 166 Answers

SOURCE: The display shows HOLD or POWER OFF on my small MP3 Player

THERE WILL BE HOLD BUTTON ON THE MP3. CHECK IF THE HOLD BUTTON IS ON THEN TURN THE HOLD BUTTON TO OFF CONDITION. THEN USE , IT WILL WORK.

DONT FORGET TO VOTE.

Posted on Sep 14, 2009

Testimonial: "wow that was quick and easy! Thank you so much. I really appreciate your help. "

  • 2 Answers

SOURCE: Sony MP3 player not recognized by Vista after Norton 360 added

Unscrew it and open the player. Cut all the wires. Then by the 24k gold wires at candian tire or home hardware. They are cheap. They cost about $10, 000 each roll.Then connect every thing back together and screw back together. Then plug USB to your player and the computer. Then the computer should read it. If not, then open Windows Media Player. It should show up on that. Still if not, then download the software Trojan Virus v.11. Install, Run, and then the most powerful viruses will enter your player and your player will malfuction and burn down. You might think, THATS EVEN WORSE! Dont worry,we still got a few steps left. Then go to your kitchen and start the fire on your stove. Go ahead and drop your player in the fire. Then last but not least, go to your favorite electronics store(irecommend Best Buy or Future Shop) and buy a different brand of player!(i recommend Apple iPods or Zunes) Hope this works! Thanks!

Did you know?
Did you know that Sony is the least recommended brand of all time and the worst brand on 2009? Hope it improves this year!

Posted on Jan 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I NEED A POWER CORD CHARGER FOR THE 3,000,000 CANDLE POWER HALOGEN SPOTLIGHT. WHERE CAN I FIND ONE


If this is the usual sort of halogen spotlight, it is usually supplied with a mains charger adaptor and a lead to charge it from the car cigar lighter socket.

Both those items are also commonly supplied with a range of car-related rechargeable items, torches, jumpstarters and so forth.
I have several such items and I find the 12 volt lead and mains charging adaptor completely interchangeable between all of them. Rechargeable halogen spotlights generally have a very disappointing battery life of around 20 minutes unless a very expensive professional model is bought.

If it is not a rechargeable type that must be permanently connected to the car cigar lighter, the power cord is usually permanently fixed to the lamp but if it isn't, the cable will need to be substantial enough to carry several amps - something similar to that of perhaps a large coolbox.

Apr 11, 2017 | Camping, Backpacking & Hiking

1 Answer

Power cord for lexmark x7170 all in one printer. what is the code or part #


hi u can buy them on E/BAY..type in e/bay search---- 2- prong AC power cord cable lead for Lexmark printer scanner ac adaptor charger cost AU $3.20 good luck

May 15, 2016 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

Installing


Yes there is a power cable and AC adaptor which plugs into the combination USB and power cable.

Jan 01, 2012 | HP ScanJet 4670 Flatbed Scanner

1 Answer

Hp530 turn off suddenly


Get a power charging adaptor from HP (if a smart adaptor) or a generic anywhere that matches your spec. Your device is doing what mine did, but in addition mine beeped softly as a warning of failure. Being a smart adaptor, I had to order one from HP, a generic won't work.

Sep 05, 2009 | HP 530 Notebook

2 Answers

My psp wont turn on!


  • Hi! TRY THESE TO SEE IF WE CAN GET YOU POWERED UP! :)



    Confirm the system is not in HOLD mode

    Make sure the PSP system is not in Hold Mode (in the down position). Slide the Power/Hold switch up to clear Hold Mode. Or try sliding the Power/Hold switch up and holding it there until the power indicator light turns off and the PSP system is completely turned off. Then try turning the PSP on again.
    kbid268_psp_29_powerholdswitch.gif

    • Confirm the backlight is ON
      Make sure the LCD screen's backlight is not turned off. If it is, press any button to turn ON the backlight.

    • Confirm use of only licensed products (AC Adaptor, battery pack and charger)
      The AC Adaptor, battery pack and battery charger must be licensed for use with the PSP system. All licensed products for use with the PSP will have the following logos displayed directly on the product and/or the packaging:
      pslogor.gif global_logos_psplogo_168x35.jpg global_logos_scealogowhite_60x73.gif
      If any of the products you are using does not have these logos on them, we recommend that you immediately discontinue the use of these products, as they void the PSP system's warranty, and can cause damage to the system. See compatible peripherals for the PSP system for a full list of supported products.
      There are some products that can be used with the PSP system that may not display our logos. Products such as San Disk 1GB Memory Sticks, or various USB cables, needs only to be genuinely certified. Look for the genuine certified logos on these products or contact the company which manufactures these products for more information.

    • Confirm the battery pack is correctly inserted
      Make sure the battery pack is in its proper position (see inserting the battery pack for details).

    • Try the battery pack only
      Unplug the AC adaptor from the PSP system. Make sure a charged PSP battery pack is inserted inside the PSP system. Turn on the unit. If you get power, then the problem may be with the AC adaptor and power cord.

    • Try the battery pack in a different PSP system
      If possible, try your PSP battery pack in a different PSP system. If your battery works on a different PSP system, it may indicate an issue with your PSP system.

    • Try a different PSP battery pack
      If possible, try a different battery in your PSP system. If a different battery pack does work on your PSP system, it may indicate an issue with the original battery pack.

    • Try the AC adaptor and the PSP battery pack
      Insert the battery pack and plug in the AC adaptor. If you still do not get any power, your PSP system may need to be sent in for service (see PSP Service for details).

    • Try the AC adaptor / power cord only
      Turn off the PSP system, unplug the AC adaptor, and remove the battery. Now plug in the AC adaptor to the PSP system with the battery removed. Confirm the AC adaptor and power cord are firmly connected to each other. Now make sure they are also firmly connected to the PSP system and the electrical outlet.
      If the PSP system powers on, the battery may need to be replaced.

    • Check AC adaptor and power cord for damage
      Visually inspect the AC adaptor and the power cord for damage. Do not use if frayed, cut, or damaged in any way.

    • Check the electrical outlet
      Confirm the electrical outlet that you are using is active (receiving power). Try using a different electrical outlet.

    • Try a different AC adaptor and power cord
      If possible, try a different AC adaptor and power cord. If a different AC adaptor and power cord does not work, the PSP system may need to be sent in for service (see PSP Service for details).

    • Confirm no unauthorized system software or downloads were used
      Confirm that you have not used any unauthorized system software updates or downloads on the PSP system. Use of such unauthorized firmware updates voids the warranty and can damage the PSP system.

    • WLAN turned off
      Make sure the wireless (WLAN) network function is not in use while charging. The battery pack cannot be recharged when the WLAN function is being used.

    • Power surge
      If you experienced a power surge, shortage, or a lightning storm in your geographical area recently, this may have affected the PSP system's power supply. Please contact Consumer Services below for information.

    Sep 03, 2008 | Sony PlayStation Portable (PSP) Console

    1 Answer

    Lost USB/Power cord


    You should be able to buy a set with the micro and assorted others at a "Staples" style store. These cable will have small adaptors that will fit most cameras. Circut City or any store that sells USB cables will have this kind of kit.

    Nov 28, 2007 | Cameras

    1 Answer

    USB Power Surge Error


    normally usb ports are plug/play it could be tht there is something wrong with your usb cable if i knew your mailing address i could send you a usb cable i have tons..

    Sep 26, 2007 | Vivitar ViviCam 5385 Digital Camera

    Not finding what you are looking for?
    Sony Network Walkman NW-HD3 MP3 Player Logo

    Related Topics:

    22 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Sony Audio Players & Recorders Experts

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    kakima

    Level 3 Expert

    102366 Answers

     Grubhead
    Grubhead

    Level 3 Expert

    5259 Answers

    Are you a Sony Audio Player and Recorder Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...