Question about Konica Minolta bizhub Office Equipment & Supplies

1 Answer

Bizhubc351 imaging how reset chip darm k Crimp paper cylinders and a brown nylon exterior damage

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Konica Minolta Master
  • 6,680 Answers

NO chip you replace the image unit. for the black!!! as for the brown roller replace the fuser unit

Posted on Jan 10, 2016


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How can I enter the Tech Mode to reset the counters?

Imaging drum reset chip Ebay £15

Mar 15, 2016 | Samsung Xpress SL-C460FW Laser...

1 Answer

What are the sighs of a bad head gasket

there are a few ways that a head gasket can go bad.
1. it can blow between cylinders, which causes rough running.
2. it can blow between water and oil passages, which will either get you engine oil into your radiator or antifreeze into your engine oil. you will be able to see these as light brown froth on the dipstick, or when you open your radiator you will see the froth there too.
3. it can blow from the cylinder to the exterior which will cause rough running again and loud repetative hiss when the engine is running.
4 it could blow from a coolant or oil passage to the exterior, which will cause a coolant or oil leak where the block meets the head.

hope this helps ~ Zach

May 20, 2014 | Ford Focus Cars & Trucks

1 Answer

Replace power cord on DR-968 infrared heater.

On most appliances you can swap a cord from any other appliance that you are throwing out. Open up the unit and disconnect the wires (either from crimp style marrettes or crimp push on or crimps with the eyelette) On the housing look for the nylon connector. Pinch this with a pair of pliers and pull out. Putting them back in is tougher but acheivable if you hav patience.

Oct 19, 2013 | Dr. Heater DR-998

1 Answer

What's the best punching bag exterior?

The most commonly used exterior types are vinyl, nylon,canvas, and leather. Other options include synthetic leather or polycanvas.
If it's for your personal use I suggest you to get the leather exterior, it'sthe most comfortable bag for punching and his maintenance is pretty easy andquick.

Jul 23, 2012 | Boxing

1 Answer

Please describe your MALFUNCTIONING CODE C 1200 OF bizhub 8031 copier problem:

Clear the trouble code with the following procedure:
1. With power ON, open the front door and locate the small, rectangular hole below the imaging unit removal tool.
2. Insert a suitable object into the hole to actuate the reset switch.
3. The code should clear and a message to close the front door should appear

Mar 13, 2011 | Minolta BIZHUBC351 Color Copier

1 Answer

Is ti possible to reset the imaging drum counter for DELL 5100cn printer ?

No, but you can find a replacement chip for the unit online, and replace if the image quality was not too bad before it locked you out. The chip is on the side of the drum unit and is easy to replace. It looks like a 1-inch diameter brown circle.

Sep 29, 2010 | Dell 5100cn Laser Printer

1 Answer

Thinkjet ink cartridges rejected by epson dx7400 - no matter how many times I try using my chip resetter, which normally works and lets the printer use the remaining ink in the cartridge.

The Epson 69 cartridges have two chips. One on the exterior of the cartridge and one just underneath. You can reset the outer chip before the cartridge is less than 25% full. If it drops below this amount of ink before being reset, the internal chip kills the outer chip. You will need to get a new cartridge or a new chip if this happens.

Dec 19, 2009 | Office Equipment & Supplies

1 Answer

Intimus 280 shredder noise

The 280 is notorious for buildup of paper in the cutting cylinders and strippers.
If you are technical, unplug from wall, disassemble top cover and clean all the debris. Check nylon strippers (white plastic) for damage.

Sep 22, 2008 | Intimus 280 Shredder

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6680 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers


Level 2 Expert

108 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides