Question about Nikon Coolpix S3300
Camera wont read the memory card that was used before but card works fine on other devices.. Never been dropped..
The only way to be sure the card is not damaged and the camera is, try to format the card (AFTER SAVING ALL PICTURES ON THE CARD FIRST) in the camera. Cameras can be very picky what format, or what device did the format.
It should be a second nature, to format a memory card every time it is used in an otter device and after you place it back in the camera.
Then a camera does not to be dropped to be broken. There are lots of other reasons it can become damaged. Like pressing in a memory card in, the wrong way around. Leaving in bad batteries, for a long time. Exposing it to extreme heat. (in summer in a car behind the windscreen) or extreme cold. Exposure to damp or water. and so on and so on.
I hope the formatting will bring relief.
Posted on Mar 21, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Nikon has tested the following cards and approved their use in the Coolpix 3200:
SD memory cards:
Other brands and capacities of cards may work, but Nikon cannot guarantee their operation. Check with the manufacturer of the third-party card for compatibility information. Nikon recommends keeping one of the approved cards available for troubleshooting.
Multi Media cards (MMC) are not recommended and should not be used.
Posted on Jan 23, 2008
It sounds like your Dazzle is not compatible with the sandisk. Maybe the Sandisk CF UltraII card have a new update software in it.
Posted on Jul 08, 2008
SOURCE: memory card write protected
Write Protection: There is a tab on the memory card so you will you need to remove it from the camera and change the position of this tab to "unlock" it.
Posted on Apr 29, 2009
SOURCE: Camera won't read memory card
More than likely the problem with this is that when dropped it caused component damage or a cable was jogged loose. To fix this would mean to complete disassemble the camera, then to find the problem and reassemble the whole unit. This is not a job for the faint. It is an intense project and may be better to sell for parts on a site such as Ebay or have it repaired by Nikon. Nikon does have a trade up program which may be better as far as the expense involved.
Any time a digital camera is dropped to a hard surface or with any impact, the damage can be from nothing to what is described here.
Hope you do well with it.
Posted on Aug 31, 2009
Tips for a great answer:
Nov 23, 2012 | Fuji FinePix Cameras
Nov 26, 2011 | PNY 4GB Secure Digital High Capacity...
Jul 26, 2011 | Cameras
Jul 24, 2011 | Olympus SP600UZ Digital Camera
Jul 11, 2011 | Canon PowerShot SX130 IS Digital Camera
Jul 07, 2011 | Samsung PL120 Digital Camera
Jul 05, 2011 | Video Game Consoles & Games
Jun 15, 2011 | HTC Inspire 4G Smartphone
Jul 08, 2010 | Samsung SL202 Digital Camera
67 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: