Question about Jabra SP200 Bluetooth Car Kit

1 Answer

I have had this bluetooth for a long time and just got a new phone, I paired it but can't seem to make outbound calls with it. It will receive incoming calls but when I press the button to make an out

My new phone is a Samsung Ace II x, I went through the proper procedure to pair it, turned bluetooth off, then turned it on and held the button till the blue light started flashing, paired it (it made the double-tone beep) but anytime I press the button to make a call from my car, nothing happens.........can you help me?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 361 Answers

Try it on another phone it may be the set itself make sure , it may not be compatiable with this phone , goto youtube and see fi there is an answer there ,

Posted on Mar 28, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
creativeimg1
  • 14 Answers

SOURCE: IT WONT PAIR WIYH MY PHONE. WHATS THE CODE?

Most factory codes are set to 0000 or 1234, Most are the zeros not the oh's.

Posted on Oct 07, 2009

supernova278
  • 1932 Answers

SOURCE: I purchased a new Iphone and my Jabra will not

Hi,
To remove the list, press and hold the Answer/End button, Volume up button and FM button at the same time. A beep indicates the list was removed from the speakerphone memory. The next time you power on, the speakerphone will go into pairing mode as the first time you powered your new Jabra CRUISER on.
Thank You

Posted on Nov 12, 2010

  • 2 Answers

SOURCE: GNM-OTE3 Jabra Bluetooth Headset is blinking 3

Have you already tried to put your headset in pairing mode first? Anyway, to do it, starting with it turned off, press and hold the on/off button for some 5 seconds, until the indicator light is steadily lit (it will flash as it was being turned on, but don't release the button at that phase). Then, make your phone'sbluetooth application search for new devices. After a while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros);
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.
Hope you are able to sort your problems out.

Posted on Jan 01, 2011

EdNelson
  • 149 Answers

SOURCE: Cannot get my new Iphone 4 to pair with my Jabra

On your phone, make sure bluetooth is turned on (settings, general).

While your phone is in discovery mode, turn your bluetooth device on and put it in discovery mode (usually you have to hold the power button for 7-10 seconds).

Your phone will find the device, and you will be prompted to enter the devises PIN number (often 0-0-0-0). Your phone should pair with the device then.

Posted on Jan 05, 2011

Ezrahite
  • 2632 Answers

SOURCE: Need pairing intructions and how to use

Hi,

Welcome to Fixya. Provided the link below of the Jabra Bluetooth Cruiser 5001 Manual

Jabra Bluetooth Cruiser 5001 Manual

If you have questions please let me know. Thanks for using Fixya.

Posted on Apr 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to pair bluetooth


One device sends the Bluetooth signal. For example, your smartphone can send a Bluetooth signal to play music from the phone on a portable speaker, or you might send it to a wireless earphone to make hands-free phone calls.
The second device receives the Bluetooth signal and plays the sound or picture.
To pair them, first set the receiving device (example: Bluetooth speaker) in "pairing mode". This is usually done by pressing a certain button on the receiving device for 3 or 4 seconds. Next, on your sending device (example: your phone) open the Bluetooth settings and select to search for Bluetooth devices. Your receiving device should appear in the list of available Bluetooth devices. Tap to connect to the receiving device. This may take up to 15 seconds. You should see a message on one or both devices saying "Connected".

Jan 01, 2016 | Audio Players & Recorders

1 Answer

How to pair my sprint slx-800 to my android phone


You should search for this topic and answers, First.

Try 0000 that's the default for all bluetooth accessories.

If that doesn't work, here is generic instructions:


Paring a Bluetooth Handset with Android phone:

Instructions:
Now that you have your headset in pairing mode, proceed to pair it with your phone:

From the home screen, press the Menu key and then select Settings.

Tap the "Bluetooth" toggle to ON.

Tap Bluetooth to scan for devices.
NOTE: You will automatically be connected to an available saved device when Bluetooth is turned on.

Tap one to connect.
NOTE: A security code may be required. (Try 0000)

The Bluetooth connected icon will be displayed in the notification bar, and the device will now be labeled as Connected.

Place calls using the Bluetooth headset

Ensure the Bluetooth headset is paired with the handset.
Place the Bluetooth headset over your ear.
Dial the desired the phone number on your phone, and then tap Call.
Receive calls using the Bluetooth headset

Ensure the Bluetooth headset is paired with the handset.
Place the Bluetooth headset over your ear.
Press the Call button on the Bluetooth headset when a call is received.

Aug 20, 2015 | Sprint Cell Phones

3 Answers

Great sounding speaker, but nothing but trouble with the bluetooth. It appears that I can only have one device paired at a time. In order to connect another device, it breaks the current pairing. A


Yes this is a 'feature' of Bluetooth. (I have never seen the point of Bluetooth... Wi-Fi does everything it does, but better !)

It DOES usefully enable a phone or tablet to play though headphones or speaker and to use a headset 'cordlessly'...

Consider instead a 'Bluetooth Receiver' (under US $10 from China) connected to a FM Stereo Bug (Transmitter) - Then you can use any number of quality FM Radios (including phones with built in FM) up to 50 metres or so away...

example: http://www.ebay.co.uk/itm/Wireless-3-5mm-Stereo-Audio-Adapter-A2DP-Bluetooth-Dongle-Transmitter-Receiver-/141227224470?pt=UK_Home_HomeDecor_Accessories&var=&hash=item20e1cc6d96

Dec 10, 2014 | Marshall Stanmore Bluetooth Speaker

2 Answers

Can not connect bluetooth to MY65T Navman


I've got MY65T working on an iPhone 3GS. I previously had the problem where it would pair and retrieve phone book, but not transmit or receive voice from my iPhone when making a call.

The last thing I did that fixed it was to remove the bluetooth pairings and "reinstall software on your navman". I don't know if this may remove some of your settings / POI / etc. This was a new purchase so I didn't have anything to lose.

Before doing this I had upgraded the navdesk software to 7.30, and installed the latest firmware for MY65T. Firmware is located at http://www.navmansupport.com.au/Software/My%20Series/MY65T/MY250___352.htm

Details:
-remove the phone bluetooth pairing from the Navman from Settings / Bluetooth / My Paired Devices / [your phone] / delete
-remove the bluetooth pairing from your phone's settings
-connect navman to PC and launch navdesk
-click "My Navman" / "Reinstall software on your Navman"
-download the install file if prompted
-accept the reinstallation prompts and complete reinstallation
-set your phone to discoverable over bluetooth (just keep it on the Bluetooth settings screen on iPhone)
-go to Settings / Bluetooth /" Search new devices" on your Navman
-click your phone's name on the navman's discovered devices
-enter the PIN onto your phone when prompted and accept the pairing. This takes a little while.
-test handsfree!

Nov 29, 2010 | Apple iPhone 3G

1 Answer

Tring to install blutooth to my xdma7715 dual cd player


The Dual XDMA7715 unit does require a separate module called the Dual BTM60, as technically the XDMA7715 is a "Bluetooth Ready" cd player.

Assuming you have bought this module, the next thing you need to do is 'Pair it" with your mobile device, which I will assume is your cell phone. This keeps it from connecting with other people's cell phones as they drive by your car.

Before you begin, you need to prepare your phone for paring. Check your cell phone's users manual if these instructions don't apply, but generally this means you find the Bluetooth menu on your phone, turn bluetooth on, and make the phone 'visible' which means your stereo will be able to see it in order to pair up with it. Usually, turning visibility on only lasts for about 30 seconds, so you may have to try this more than once to get the timing done right. Once paired, you won't need to turn the phones visibility on again until the next time you pair a device.

Now that your cell phone is ready to pair with the stereo,

1) Press the Phone symbol on the cd player or the BTM60, pr press MODE until 'DUAL_BTM60" is displayed.

2) Press and hold the phone symbol on the cd player or the BTM60 for 5 seconds, until "PAIRING" is displayed. The Bluetooth icon will flash every second. The Cd player will broadcast its "availability" for 60 seconds.

3) Complete the pairing from the Bluetooth menu of your cellphone by selecting "Search for new devices". When they find each other, the Bluetooth icon will illuminate solid, and your phone will say it has found device "DUAL_BTM60", and ask you for a password to pair it.

The BTM60 device name is "DUAL_BTM60".
The password you enter into your phone to accept the pairing is "1234"

Now that the devices are paired, you should be able to make calls handsfree, and play music stored on your phone.

I hope that helps.

Nov 24, 2009 | Dual Car Audio & Video

1 Answer

How do I connect my motorola bluetooh headset S9 to my LG Vu920?


When using your S9 for the first time, follow these
steps to pair (connect) to your Phone:
Important: If you are pairing separate Bluetooth
devices for handsfree calls and streaming music, it is
recommended that you pair your S9 with your
handsfree device (phone) first.
1 Ensure the Bluetooth feature is enabled (turned
on) in your phone.

2 Turn on your S9 by pressing and holding (|) button
until the indicator light flashes three times in
blue.
After a few moments, the indicator light will be
steadily lit in blue to indicate your S9 is in pairing
mode.
3 From your device, perform a Bluetooth device
discovery/search. .
When pairing your S9, use
the following steps to perform a device discovery
from your phone:
After accessing the Settings Menu, go to bluetooth.
to add a new device, tap [New].
1. Tap [New] key to search the device that can be connected and which is
within range.
The phone lists Bluetooth devices it
finds.
b Select Motorola S9.
c Select OK or Yes to pair your S9 with
your phone.
d Enter the passkey: 0000
e Select OK.

When your S9 successfully pairs and connects to
your device, the indicator light displays blue with
10 quick purple flashes. If wearing your S9, you
will also hear an audio tone indicating successful
pairing and connection to your device.
4 To verify your S9 has successfully established a
handsfree calling connection with your phone,
dial a phone number you want to call and press
the Send key on your phone.
When successfully connected, you hear ringing
on your S9. A Bluetooth Handsfree Phone (HFP)
connection is now established with your phone

Jul 13, 2009 | LG Vu CU920 Cellular Phone

2 Answers

Troy Windconnect printserver has stopped working


Due to tolerances in manufacturing, some Bluetooth-adapters/receivers do not stick to the Bluetooth-standards exactly. If this only applies for one adapter/receiver in a pair everything works fine nevertheless. But if both do not stick to the standard, they might not be able to work together, although both would work with a standard-conform third one.

Before your mainboard was replaced, only your printserver was not exactly standard-conform. Now with a new mainboard (and therfore a new Bluetooth-adapter on it) just by accident your Bluetooth-adapter does not confirm to the standard, too.

If all this is right in your case, the solution would be to buy a Bluetooth-usb-dongle for your notebook and use this instead of the built-in Bluetooth-adapter of your notebook. If this new Bluetooth-usb-dongle confirms to the Bluetooth-standards better than your built-in adapter, this might cure the problem. Since such a Bluetooth-usb-dongle only costs about 10 Dollars, it might be worth a try.

Greetings, Michael

Feb 23, 2009 | Troy WindConnect With WindPort PC Card...

2 Answers

Bluetooth not picking up mp3


@psychurmine you may need to go into the settings of the actual music player application on your phone and tell it to output to headphones.

@ejr420hotora it could be several problems. Did you have it working at one point or is this your first time installing it? Is this your first bluetooth device or do you have others?

Feb 12, 2009 | Insignia Bluetooth Wireless Headphones...

1 Answer

Bluetooth 350


It might be the pairing has drifted slightly. I would try repairing again. It certainly cant hurt anything.

Aug 20, 2008 | Jabra BT350 Bluetooth Headset Headset

3 Answers

I had a Garmin installed in my new Volvo XC90. When I make or receive a call with my paired cell phone, I have no audio either through the phone or the car speaker. I cannot hear the caller or vice verse....


What model number is the GARMIN GPS?

Is your new Volvo equipped with the Bluetooth handsfree system?

It's possible that your GARMIN has paired itself to your cellphone unintentionally via Bluetooth (many GARMIN units have Bluetooth), and therefore intercepting your cellphone audio.

If you >intended< to use the GARMIN for this puropse, maybe your hands-free system in the Volvo is competing for your cellphone audio, and needs to be de-activated.

More info please :-)

May 07, 2008 | GPS

Not finding what you are looking for?
Jabra SP200 Bluetooth Car Kit Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jabra Cell Phones Experts

xalint1
xalint1

Level 2 Expert

152 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2760 Answers

ka4iup
ka4iup

Level 3 Expert

3957 Answers

Are you a Jabra Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...