Question about Televison & Video
Im trying to set up codes on my ge univeral remote control on my supersonic tv
0601 0658 0684. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
Posted on Mar 20, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here is the link for all Codes
and the Manual for instructions
Posted on Jan 18, 2008
SOURCE: Ge remote control #24921
You can find the remote control codes for different brands
of devices from
If none of the codes work then we have two other solutions:
1. Searching For Your Code
If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
2. Learn the buttons from the original
Line up your original remote and the head-to-head before completing the following steps.
Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned
More help for programming your remote can be found here:
Hope that helps!
If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.
P.S. - You can rate a solution with one of four ratings as explained under (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).
Posted on May 05, 2008
the codes for sony are 0128, 0013, 0002, 0071, 0380, or 0152
1) Make sure the tv is on.
2) Press and hold the set up button till the red light on the left hand corner stays on.
3) Then press tv then release quickly so that the red light flashes once. (its pretty quick so pay attention).
4) Then enter one of the four digit codes and the red light will turn off.
5) Then press channel up.
If it goes up u have the right code. If not start from the begining (holding the setup button down) and do the same steps for each of the codes, one of them should work if not u have to do a code search. Follow steps #1, 2, 3, and 5 but on step 5 press it repeatedly (for up to 300 times and it says that on the instruction manual) until the device can be controled. The red light blinks then stays lit
6) press and release mute to install the code. The light will go off.
Posted on Aug 21, 2009
Tips for a great answer:
Oct 18, 2014 | Venturer PLV97187H 19"" Class 720p LED LCD...
0049 0097 0110 0004
0268 0012 0108 0180
Apr 20, 2012 | GE Televison & Video
Nov 14, 2011 | GE RM24912 Universal Remote Control
Oct 09, 2011 | Televison & Video
Jul 08, 2011 | Sanyo AVM-1906 TV
Dec 01, 2010 | Sanyo AVM-3259S TV
May 10, 2010 | Televison & Video
May 24, 2008 | Televison & Video
Dec 27, 2007 | Televison & Video
Oct 25, 2007 | GE JASRM24912 Remote Control
71 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: