Question about NEC 3.5 Versa P/M/S Floppy Drive (1362351650) Floppy Drive

1 Answer

Nec floppy mine comes up as a 5.20 360 instead of 3.5 1.44

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 44 Answers
Re: nec floppy - NEC 3.5 Versa P/M/S Floppy Drive (1362351650) Floppy Drive Floppy Drives

Is this a problem if it works?

Posted on Dec 16, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hello! I have a Floppy Drive FD-235HG-C332 manufacturer TEAC. I want to know what data capacity (Operations modes) has my device: 720Kb, or 1Mb, or 1,44Mb, or 1,6Mb, or 2Mb. There are jampers, placed...

Your TEAC FDD (floppy disk drive) is a Tri-mode device (720 KB, 1.2 MB, and 1.44MB)

The "235" part of the model number indicates the drive's form factor (size) is 3.5 inches.
The "HG" part of the model number indicates that the FDD is a Tri-mode device, with the 3 modes
given above.

The manufacturer notes that it has no jumpers, but every FDD I've ever seen has jumpers for
bus master/slave selection. Either master or slave will work.

Here's the manufacturer's web site URL for your TEAC floppy disk drive:

Here's the info on the NEC FD 1137C drive:
Enclosure Type Internal
Interface Floppy (IDC)
Platform: PC
Technical Features Capacity 1.44 MB,2.8MB,360MB,720KB,1MB,640KB
Minimum System Requirements:
Operating System Microsoft DOS • Microsoft Windows 3.1 • Microsoft Windows 95 • Microsoft Windows NT
Form Factor: 3.5" floppy disk drive

Here's the best info I found on your NEC FD 1137C Floppy disk drive:

May 13, 2011 | Teac Floppy Drive 235HG (FD-235HG) Floppy...

1 Answer

I am installing an EPSON SD_600 5.25 inch flopy drive into a gateway computer. Which if any jumpers do I need to change into order to have this drive share a data ribbon cable with the existing 3.5 inch...

Unless floppy drive cables have changed in the past few years, they're designed for 2 floppy drives, with the jumpers on both set the same way. There's a small twist in the cable that changes the drive addresses instead.

Or you could just replace the existing drive with the new one.

Mar 13, 2011 | NEC Epson Combo 5.25 and 3.5 Floppy Drive...

1 Answer

I need the driver of NEC FD 1231H floppy

You can download the driver from Windows Update.
Plug the floppy drive in to your computer/laptop. Found new hardware wizard should pop up. Just follow this guide & it should work.

Mar 11, 2011 | NEC Slimline (FD1231H) Internal Floppy...

1 Answer


If the Floppy Drive is not appearing in my Computer, open the PC and check that the cables are connected to the drive properly.

Also open Device Manager and check under Floppy Disk Drives that the drive actually appears there.

Aug 30, 2010 | NEC FD1231M 144MB 35" Internal Floppy Disk...

1 Answer

Floppy drive light stays on all the time

please remove the floppy disk if inserted floppy drive...........or unplug the floppy drive .........or check the motherboard setting....some times light on due to reading floppy disk........please try it and rate it

Apr 11, 2009 | NEC (FD1231T) Floppy Drive

4 Answers

I need a JU-253-403P floppy drive or equivalent

[International Portal Floppy Drive ,] is "TEAC low-density jumper floppy drive, SONY low-density jumper floppy drive, YE-DATA low-density jumper floppy drive, EPSON low-density jumper floppy drive, MITSUMI low-density jumper floppy drive, Panasonic low-density jumper floppy drive, Mitsubishi low-density jumper floppy drive, CITIZEN low-density jumper floppy drive, NEC low-density Jumper floppy drive "global distributor. ]

Mar 05, 2009 | Panasonic (JU257A607P) (JU257A607P)...

1 Answer

Floppy drive

This problem is your motherboard setting in bios. Change the bios by press del or f2 or f10 and go to bios setup and select the floppy drive which u have 1.44mb as "A" drive and save it and restart ur computer and once again the same problem comes, change the battery 3.3v in ur motherboard

Oct 30, 2007 | NEC 3.5 Versa P/M/S Floppy Drive...

1 Answer

Nec Usb FDD UF0002

Try Formatting using MS Dos : Good Luck

Jun 30, 2006 | NEC (UF0002S-107) External Floppy Drive

Not finding what you are looking for?
NEC 3.5 Versa P/M/S Floppy Drive (1362351650) Floppy Drive Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Floppy Drives Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

7983 Answers

Donna Sander

Level 2 Expert

193 Answers

Are you a NEC Floppy Drive Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides