Question about Computers & Internet

1 Answer

Dap 1360 Dear Fixya, I've set up my D-Link Dap-1360 as a repeater of a router wifi Nilox. It seemed to work well, until I've discovered that, inexplicably, after half a day or one day, the Dap-1360 doesn't repeat the signal any longer. Besides, if I try to reach the website of the repeater (dlinkap or 192.168.0.50), I am not able to do it. So I have to unplug and plug back the Dap-1360 in order to have it work again. How can I fix this situation? Also another question: how far do I have to put the Dap-1360 from the router wifi Nilox? I mean, when the Dap-1360 detects the possible networks to link to, it gives percentages for every network, based on the strength of the signal coming from the router wifi. Which is, according to you, the most befitting percentage?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

1- first distance between Dap-1360 from the router wifi Nilox should be max the signal length around 50 meter,
2- try to update the Dap-1360 software from the internet then test the network cable again and the electric cable..
hope it help ...

Posted on Mar 19, 2014

Testimonial: "I didn't understand the point 1 well... anyway, I'll try to update the Dlink firmware"

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 20 Answers

SOURCE: Can't configure the network with ethernet cable

Hey, you're almost there. The connection between the no-wireless PC over ethernet to the DAP-1360 Repeater is fine. The reason it can't connect to your LAN or the internet, however, is that the repeater isn't actually repeating your Ofir network, it is instead creating it's own, completely isolated wireless network (Ofir_EXT).


The D-Link setup and documentation is confusing, and doesn't have proper instructions for the repeater setup.


Rerun the setup wizard, setup as a repeater, then select manual configuration method.


Now, enter the wireless network name of your the network you want to extend (in this case, Ofir). Then enter the same security and password etc. for Ofir in the following fields, just like you were connecting to Ofir from a smartphone or laptop.
Once that is finished, you should be up and running. If things worked, you should NOT see any new wireless network. There should be Ofir and just Ofir. Wireless repeaters work invisibly, you'll still connect to the same network like you always did, but now it will have much improved range thanks to the DAP-1360. The computer entherneted to it should be networked on the wireless LAN and have internet access after this as well.



Good luck, I hope my instructions were clear. Wifi networking is easy, it's understanding all the manufacturers less-than-intuitive software that makes it hard.

Posted on Oct 20, 2012

  • 10 Answers

SOURCE: Router can't detect DAP 1360 when installed about 90 meters away. UTP connectors tested okay.

have you tried turning on and off the router and AP? it would scan again...it looks like you just need to recheck connections and powers...

Posted on Oct 12, 2012

  • 12 Answers

SOURCE: cant konfigure router, when i type 192.168.0.50 or

Reset using the button on the back the do an ipconfig - so if you ip is 192.168.1.1 try that to get in to the router

Posted on Jul 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why i can not go to sit for configure DAP-1360


Go to this link http://support.dlink.com/ProductInfo.aspx?m=DAP-1360 and download the user manual for your DAP-1360. Configure it in the WISP mode following the manuals instructions.

May 19, 2014 | D-Link DAP1360 IEEE 80211n (draft)...

1 Answer

JE NE PEUX PAS INSTALER DAP 1360


Access D-Link's support-site: ftp://ftp2.dlink.com/PRODUCTS/DAP-1360/

Choose 'REV. A' or 'REV. B' or 'REV.C'.

Download the instructions for your router.

Feb 16, 2014 | D-Link DAP-1522 Xtreme N Duo Wireless...

1 Answer

Cannot access either dlinkap or 192.168.0.50 via web browser in order to set DAP-1360


Connect your computer to the router.
Assuming Windows 7, click the "Start" button.
Into the search-box, type 'CMD' and press ENTER.
Type 'IPCONFIG /ALL'.
Look for the IP-address of the "gateway" (or "DHCP-server").
Type that IP-address into your web-browser.

Nov 24, 2013 | D-Link DAP-1522 Xtreme N Duo Wireless...

1 Answer

How to configure Dlink DAP-1360 wireless N Range


Is this the router that is currently connected to your network, and also the router that is providing you with internet right now? what would you like to setup?

Dec 18, 2012 | D-Link DAP-1360 Wireless N Range Extender

1 Answer

Can't configure the network with ethernet cable


Hey, you're almost there. The connection between the no-wireless PC over ethernet to the DAP-1360 Repeater is fine. The reason it can't connect to your LAN or the internet, however, is that the repeater isn't actually repeating your Ofir network, it is instead creating it's own, completely isolated wireless network (Ofir_EXT).


The D-Link setup and documentation is confusing, and doesn't have proper instructions for the repeater setup.


Rerun the setup wizard, setup as a repeater, then select manual configuration method.


Now, enter the wireless network name of your the network you want to extend (in this case, Ofir). Then enter the same security and password etc. for Ofir in the following fields, just like you were connecting to Ofir from a smartphone or laptop.
Once that is finished, you should be up and running. If things worked, you should NOT see any new wireless network. There should be Ofir and just Ofir. Wireless repeaters work invisibly, you'll still connect to the same network like you always did, but now it will have much improved range thanks to the DAP-1360. The computer entherneted to it should be networked on the wireless LAN and have internet access after this as well.



Good luck, I hope my instructions were clear. Wifi networking is easy, it's understanding all the manufacturers less-than-intuitive software that makes it hard.

Oct 16, 2012 | D-LINK SYSTEMS DAP-1360 Wireless N Range...

1 Answer

Router can't detect DAP 1360 when installed about 90 meters away. UTP connectors tested okay.


have you tried turning on and off the router and AP? it would scan again...it looks like you just need to recheck connections and powers...

Oct 09, 2012 | D-Link DAP-1360 Wireless N Range Extender

1 Answer

Dap-1360 pin


It is printed on the bottom of the router.

Aug 01, 2012 | D-Link DAP-1360 Wireless N Range Extender

1 Answer

DAP-1360 won't respond or reset.


Click the Windows 7 "Start" button.
Type 'CMD' into the search-box, and press ENTER.
Type 'IPCONFIG /ALL' and press ENTER.
Look for the IP-address of the "gateway" (or "DHCP-server").
Type that IP-address into your web-browser.

Jul 31, 2012 | D-Link Wireless N Access Point Dap-1360 -...

1 Answer

Dlink dap 1522


I think I was having a similar problem with my DAP-1522 ... FW Version 1.10 being used as an access point. I recently discovered that I was not able to connect to the configuration pages using a web browser by typing in it's IP address (192.168.0.50). When I originally set this up device up on my network, it worked just fine, but at some point in time, it stopped working. My solution to this problem was to set the switch on the back of the 1522 from Auto to AP, then re-boot the DAP-1522 by removing power, waiting 10 seconds, then plugging power back in. Once the AP re-booted, I was then able to access the configuration login page by typing 192.168.0.50 into my browser. My DAP-1522 access point is connected via port 1 to my D-link router, a DGL-4100, via a DGS-2208, 8 port gigabit switch. Hope this helps!

Aug 16, 2009 | D-Link AirPlus Xtreme G DWL-2000AP...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...