Question about Janome Memory Craft 3000

Open Question

No display display will not work

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My pfaff 7570's display is not working

what are the symptoms you can see in your machine.?

1. check power cable from plug point.
2.if you can open your machine, check display wire loose contact or not.

Dec 16, 2015 | PfaFF Sewing Machines

1 Answer

My Jerome memory craft 7000 has stopped working the light works but the display will not light up and it's stopped working someone said I might need to reboot it any ideas on how to do this?

Is there a display dimmer that has been turned down on the machine?

These are reset instructions for a Janome 8000, but may be applicable to your machine:
... How to Reset Janome Memory Craft 8000 eHow

You might check out some of the other questions/answers on
Questions Answers for 7000 janome

Have you checked the Troubleshooting section of your owner's manual? If you are still unable to get the display to work, there's a pretty good chance there is an electronic failure and it needs service. You can probably call Janome's Support department.


Aug 10, 2015 | Sewing Machines

1 Answer

Computer display does'nt work

it would be a good idea to have the machine checked, to see if there is something wrong with the motherboard.

Nov 09, 2013 | Sewing Machines

1 Answer

I powered my machine on and there was a black line down the screen. The machine still sews and embroiders but I would like to know what caused this and is this major?

If there is a black line down, or across the display and the line is there no matter what 'information' is being displayed, I'm afraid it sounds like there's a row or column of pixels (or actually, it's the display driver) that has gone faulty on your LCD display and the only solution is to have the display replaced. It will not affect the operation of the machine at all and may be an isolated failure. You dont state what model of machine this is, so I cant give you an idea of price, but it does require the front panel to be removed and the main processor board to be taken out to get at the display ... for this reason, you must have the work done by a decent Bernina service agent that has the proper anti-static protection on their work-bench - static can cause long-term problems with machines if not properly discharged. It's not a cheap repair, so you may just want to put up with it, unless, of course, it's still under warranty (2 years for electronic parts).

Nov 30, 2011 | Bernina Sewing Machines

1 Answer

ELNA 7000 no display on screen

Problem solved - I have a useful son! he took off the casing & cleaned 'circuits' . Now works fine. Wendy

Jan 30, 2010 | Elna Sewing Machines

1 Answer

No display

Do any of your stitches work? Does the machine sew at all? If not, one of your circuit boards is bad or you have a blown fuse.If the machine works but you have no display, get out your instruction book and see how to adjust the brightness on your display. If it doesn't work at all, it needs to go to a technician who is familiar with and can get Pfaff parts. This usually means an authorized Pfaff dealer.

May 19, 2008 | PfaFF Quilt & Craft Pro 7530

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

194 Answers

Eva Hack

Level 1 Expert

25 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides