Ultronic td552 set day - RIM BlackBerry Pearl 8100

TD00552: 12 hr--military time toggle= tap time set button. Set time= hold down time set button till up & down arrows show on r & l sides; set hour, tap time set button, then set minutes, repeat, seconds, repeat. Date change= tap hour if needed to show day & month; then hold set button on left till up & down buttons show at edges of screen. Up/down buttons to set year on lower right screen, tap set again to change # day of month, tap set again to change month, and the day will correct itself. Change temp c° -- f°= tap alarm button if needed to display temp b them tap set button next to it to change temp scale. Alarm- off/on= tap screen button if needed to show alarm time; tap alarm set button next to it- it will toggle on/off. To set= with alarm time showering, hold down alarm set button till up/down buttons show; follow same process as above.
You are all welcome ??

Need help to set week day and 12 hour day instead of 24 hour day on Ultronic weather clock sent to me without any instructions, can you help or tell me who to contact to find out how to set up this clock?

Press upper right box 'alarm' until alarm time shows, then press 'set' button and it will toggle between 'off' and 'on' for the alarm.

This is for Ultronic LCD clock/weather gadget.

keywords (from display)
Ultronic forecast week day humidity temperature trend comfort level
- DOWN = toggles F/C temp
- UP = toggles alarm
- MODE = selects date/time display
- hold down MODE to enter "set" mode for data currently displayed
- use momentary MODE to choose target item
- use UP/DOWN to change item

http://www.fixya.com/support/t4343278-ultronic_touch_screen_thermo_alarm_clock

This may be helpful, it's how I set mine.
1) Remove battery cover
2) Remove batteries
3) "Set" the clock and battery cover into the trash can.

There you go. No more problem !

Press the time (current time - numbers) to get to the date mode. Then hold-press "SET" to set it.

How to set the ULTRONIC WORLD TIME CALENDAR 01-22-2011
1. press the SET (MRC) key. The SECONDS in the lower right corner will start to blink
2. press again and the HOUR will start to blink. And again for the MINUTES, again for the YEAR, again for the MONTH, and again for the DAY DATE.
3. when you get the number you want to set, press the UP (M-) or DOWN (M+) ARROW key to adjust that number as you wish.
4. then press TIME to lock in that number.
5. repeat as needed to set the other numbers