Question about Life Fitness 95xi Rear Drive Commercial Elliptical Crosstrainer - Refurbished
Check the battery or alternator that charges it. battery is usually front end and alt is in the back. if this is not it it could be the the controller board
Posted on Jun 26, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: replacement console
Unplug unit then remove the upper console, their are 4 allen bolts holding it udder the console their is a panel held by 4 phillips head screws also remove them . Look inside the compartment and their should be two connections, disconnect them. Now pull console off its tower. Lay it upside down on a thick towel remove all phillip head screws you'll notice where the emergency stop button is connected. I have found that this connection 7 out of 10 times is causing the problem. Buy cutting the lead connector stripping the wires and soldering back on the male connection will resolve the problem. If not their is a emergency stop kit may be purchased and replace. The only other thing that may cause the problem is the function key pad itself. Try the first solution if your not good in soldiering go to a computer shop , t v shop they should be able to do this very quickly for while your at let the check the switch itself.
Posted on May 18, 2010
Testimonial: "This guy really does know his stuff. I am very pleased I was able to fix the treadmill with absolutely no expense. I simply followed the clear instructions and the machine was up and running in an hour. I would rate this expert 10/10 but actually he warrants 11! maxtreadmill yo da man !"
try to reset the treadmill by following these steps :
Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or move on to the next step.
Locate the reset switch on the underside of the treadmill console. Usually the button is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.
Posted on Oct 02, 2010
Tips for a great answer:
on Apr 28, 2014 | Exercise & Fitness
Mar 22, 2014 | Life Fitness 95xi Rear Drive Commercial...
Mar 18, 2014 | Life Fitness 95xi Elliptical Crosstrainer
Feb 03, 2014 | Exercise & Fitness
Dec 29, 2013 | Life Fitness 95xi Elliptical Crosstrainer
Dec 16, 2013 | Life Fitness 95XI Elliptical Trainer...
Sep 21, 2013 | Life Fitness 95xi Elliptical Crosstrainer
Nov 19, 2010 | Life Fitness Remanufactured 95Xi...
145 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: