Question about Vacuums

1 Answer

My Miele S716 works ok on speed setting 300 but as soon as I turn the speed up the motor goes fast then slow continuously, any ideas.

Posted by on

  • austin_mair Mar 20, 2014

    Speed is ok at the low setting of 300 but as I slowly turn it up at about setting 1200 the speed is erratic until I turn it back down.

×

1 Answer

Replace the knob that is used to change this speed setting

Posted on Mar 24, 2014

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

reddevil6
  • 1673 Answers

SOURCE: There seems to be a

Are you sure about the model number, S716 doesn't come up. But it could be a bad motor, or it be a circuit board mounted by the motor.

Posted on Jun 22, 2008

  • 1 Answer

SOURCE: Miele S716 Not running red

Dry joint found on motor control circuit board.

Posted on Jul 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Miele olympus 300


The Olympus is an S2 canister, which part stopped working?
If all of it stopped, the problem could be with the molded outlet plug. Before going to much further, check to see if you are still under warranty. One year parts, 7 years on body and motor. You might want to call Miele Technical Service.
http://tinyurl.com/miele-telephone-numbers

Nov 04, 2013 | Vacuums

1 Answer

Miele vacuum s5980 no power


your main circuit board is also your speed control the motor should not have a circuit board i don't believe. open your machine up all the way to the motor and cord reel. check voltage at cord reel should be 120 +/- 10. if voltage is correct then replace speed control board.

Feb 12, 2013 | Miele S 5980 + SEB 217 Bagged Canister...

3 Answers

Miele s571 vacuum cleaner power surges up and down in strength every few seconds from startup.


I just repaired the same problem. It is not the motor. There is a defective capacitor in the regulator. Large grey capacitor should have a value of 0.22uF/275V. It was in my case just 85uF. Changed capaitor and it was OK.

Jun 24, 2009 | Miele S318 Bagged Canister Vacuum

1 Answer

There seems to be a short in the motor of a Miele S716 vac. Water was accidentally sucked up about 2 months ago


Are you sure about the model number, S716 doesn't come up. But it could be a bad motor, or it be a circuit board mounted by the motor.

Jun 22, 2008 | Miele Vacuums

1 Answer

Miele vacuum cleaner not working properly


Is the suction low or ok at the vacuum without the hose attached? If it is ok, then there is a clog in the hose. If it isn't, then check filters, is the speed variable, is the contol set too low. Could be a bad motor, running too slow.

Mar 05, 2008 | Vacuums

2 Answers

Miele Vacuum Cleaner


S718 doesn't come up in the Meile parts list, there is a S518, some possibles to check: The switch part #04367102, Indictor lite w/pot. # 05482010, Reel cord 05240302, and motor electronic control # 05408620. Any one of these could be giving you the problem you describe. You will have to dive in and starting with the switch, and eliminate which ever parts seem ok. The reel cord could have bad internal contacts, I have had the pots go bad, but the electronic control more ofter. Which I could pin point it for you.

Jan 17, 2008 | Vacuums

1 Answer

Miele s234i vacuum


could be the speed control # 01725370 and would sell for close to $100. Or it could be the control # 01741590 and would sell for about $50

Nov 18, 2007 | Miele S318 Bagged Canister Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18390 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...