Question about Vehicle Parts & Accessories

1 Answer

Chrysler sebring 2008 transmission control module

It wont pick up speed but any after 50 miles it goes into overdrive

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 86 Answers

Hi. Have it checked by a professional. It sounds like either the clutch packs are burned-out, the torque converter is shot, or the kick-down or downshift is not working properly. Only when a vehicle has reached a specific speed will overdrive kick-in or the transmission will be allowed to operate in overdrive mode. Chrysler Sebring, Dynasty, New Yorker, and many other models were made using a fully electronic transmission that tended to fail very early in normal use. Many failed during the warranty period and Chrysler refused to replace them under warranty, sticking customers with a bill of $3800-8000 for misuse or abuse of their vehicles, prompting one of several lawsuits filed against them since 1991 starting with the defective ABS systems. Most of these electronic transmissions could not be repaired properly by the dealerships, forcing them to return them directly to their manufacturing facilities to rebuild them, only to fail yet again within the first 2 years of normal service.

Posted on Aug 17, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Chrysler Sebring trans erratic function,goes into limp mode when at operating temps.


Check the transmission control module. The valve body may be worn too.

Feb 07, 2017 | 2003 Chrysler Sebring

1 Answer

Where is the relay for tail lights on my 2008 Chrysler Sebring


There is no relay. Functions are controlled by the totally integrated power module (TIPM).

Sep 12, 2016 | 2008 Chrysler Sebring

1 Answer

1996 Sebring won't engage into overdrive


check your shift solenoid (A-B-C-D), i have the same problem. OBD PO700 (Transmission Control System) , PO750 (A), PO755 (B), PO60 (C), PO765 (D). i hope this helps.

Feb 20, 2013 | 1996 Chrysler Sebring

1 Answer

1998 Chrysler Sebring convertible Not shifting into drive check engine light came on, error code PO715


DTC P0715 CHRYSLER - Input Speed Sensor 1 Circuit
P0715 is detected when TCM or ECM does not receive the proper signal from the sensor.

The input speed sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM).

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Possible shifting problems

Possible causes
- Transmission speed sensor circuit is open or shorted.
- Poor transmission speed sensor circuit connection
- Faulty transmission speed sensor

Hope this clues helps to solve it.

Jun 02, 2011 | 2003 Chrysler Sebring

1 Answer

My 1997 jumps to neutral when i pick up speed and it is auto ... and it goes back to auto within sec is it my transmission


theres a scencer in the transmission that tell it when to shift unlike the old school transmission almost everything on newer one's are computer controlled i would look for a bare or broken wire coming from the transmission.

Dec 09, 2010 | 1997 Chrysler Sebring

1 Answer

Trying to fine the Weel Lug Nut torque on a 2008 Chrysler Sebring Convertible Limited with 3.5L V-6 and Aluminum Wheels.


Thanks for asking.... most people just use the German torque spec..... "Gut-n-Tight"

100 ft-lbs
and then Re-Check torque after 50 miles!!!


Cheers

Jun 04, 2010 | 2008 Chrysler Sebring Convertible

1 Answer

2008 sebring convertivble -m wont shift


if was running fine and and next day just wont go y woulthink is probably oyu input or output speed sensor,oyu need to check it with scanner and see if is that is the problem and not you tranny brain

Sep 27, 2009 | 2008 Chrysler Sebring Convertible

Not finding what you are looking for?
Vehicle Parts & Accessories Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vehicle Parts & Accessories Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14200 Answers

Brad Brown

Level 3 Expert

15451 Answers

Are you a Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...