Question about Meade DS-2114 ATS (325 x 114mm) Telescope

1 Answer

Motor unit fault DS 2000

I have inserted new batteries, balanced the tube but I still get an error message,"Motor unit fault". I have done everything possible but the motor just does not work. Please let me know if you have any other suggestions .

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,186 Answers

Continual motor faults simple mean something is broken inside the telescope--- motors, or gears--- something is preventing the motor from turning the telescope.

Time to either take it back and get a replacement... or send it in for repairs.

Here is the Meade service phone line--
http://www.meade.com/support/contact.html

Posted on Jun 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher Paykel GWL11- US Washer


- Motor control module fault:
Fisher and Paykel washing machine error 1:
Primary Source: Motor control module.
Action: Replace motor control module.

3 - Motor control module fault:
Fisher and Paykel washing machine error 3:
Primary Source: Motor control module.
Action: Replace motor control module.

9 - Size setting fault:
Fisher and Paykel washing machine error 9:
Primary Source: Motor control module.
Action: Reset machine size as per service manual instructions. If fault repeats replace Motor control module.

10 - Temperature Sensor (Thermistor) Error:
Fisher and Paykel washing machine error 10:
Primary Source: Thermistor.
Action: Replace Thermistor.

11 - Pressure Sensor Fault:
Fisher and Paykel washing machine error 11:
Primary Source: Pressure Tube.
Action: 1 - Empty all water from the machine. Remove pressure tube from pressure sensor, clear pressure tube of any water and reconnect tube (blow down the tube is necessary). 2 - If fault repeats, replace Motor Control Module.

12 - Flood Protection Error:
Fisher and Paykel washing machine error 12:
Primary Source: Water Valves.
Action: If the water valves are on continuously, check that the water valves turn off mechanically by disconnecting power to the machine.
Secondary Source: Pump System.
Action: Check pump for blockage and drain hose for correct height(end not immersed in water) or kinked.
Tertiary Source: motor control module.
Action: If water valves are been driven on electrically, replace motor control module.

36 - Water Leak Fault:
Fisher and Paykel washing machine error 36:
Motor control module has needed to top up the water level more than 4 times during wash/rinse cycle. Most likely cause is waster siphoning out or the machine has developed a leak.
Primary Source: Drainage system.
Action: Check that the hose is not less than 850mm from the ground
Secondary Source: Pressure tube.
Action: Make sure the pressure tube is fitted correctly and doesnt have any holes.

37 - Blocked pump:
Fisher and Paykel washing machine error 37:
Primary Source: Drain System.
Action:
1. Check that the drain hose has not been kinked.
2. Check the length of the hose. 1m is maximum extension.
3. Check drain pump winding for open circuit.(Note: Pumps are fitted with a thermal cut out and will reset after cooling)
4. Check for physical blockage to pump and hoses.

38 - Pressure Sensor Fault(empty reading during wash cycle):
Fisher and Paykel washing machine error 38:
Primary Source: Pressure tube.
Action: Check if tube is fitted correctly, check for blockages or holes in the pressure tube.
Secondary Source: Motor Control Module
Action: Replace the module.

39 - Pressure Tube Fault:
Fisher and Paykel washing machine error 39:
Same as fault 38.

40 - Bowl Dis-engage Fault:
Fisher and Paykel washing machine error 40:
Primary Source: Mechanical.
Action:
1. Check that there are no clothes or other foreign objects preventing the clutch from re-engaging. Excessive suds can also stop the bowl rotating.
2. Check the clutch splines for physical damage.
3. Check that the pressure tube has not come off, kinked or blocked(blow down the tube.
Secondary Source: Motor Control Board.
Action: Change Board.

43 - Out Of Balance Switch Fault:
Fisher and Paykel washing machine error 43:
Motor control module has found that signal returning from the out of balance switch indicates that the switch is permanently on or the harness to it is disconnected.
Action:
1. Check the level of the machine.
2. Check wiring to the switch.
3. Check switch for continuity and corrosion.

44 - Water in Bowl During Spin:
Fisher and Paykel washing machine error 44:
Primary Source: Drain system.
Action: Check for blockages/kinks in drain hose and function of the drain pump.

48 - Hot and Cold Inlet Valve Incorrect Signal:
Fisher and Paykel washing machine error 48:
Primary Source: Wiring.
Action: Check the wiring.
Secondary Source: Inlet Valves.
Action: Check the resistance of the coils.
Tertiary Source: Motor Control Module.
Action: Change Module.

49 - Cold Water Inlet Valve Faulty:
Fisher and Paykel washing machine error 49:
Action: See fault 48.

50 - Hot Water Inlet Valve Faulty:
Fisher and Paykel washing machine error 50:
Action: See fault 48.

51 - Diverter Valve Fault:
Fisher and Paykel washing machine error 51:
Primary Source: Blocked diverter valve.
Action: Check for foreign objects in the valve.
Secondary Source: Motor Control Module & Diverter Valve
Action: Plug the machine into the power point but off at the control panel. Check voltage on the plugs at the diverter valve. If voltage around 230V, change diverter valve and motor control module

Oct 07, 2016 | Fisher and Paykel Washing Machines

1 Answer

Ninentendo DS


ok here shake the ds card if u feel something moving yhen it means the card is somehow spoilt

Jul 22, 2010 | Nintendo DS Lite

1 Answer

New motor board and the belt pulses


It sounds like the unit speed sensor is out of adjustment or the connections is not secure when replaced the new board and last thing some units sometimes need a calibration to tell the upper console to synchronize with the lower board.

Apr 11, 2010 | New Balance Balance 1500 Treadmill

1 Answer

Lens problems 114.100.Camera will not charge up


Are you experiencing an error fault message or No power fault. If you are experiencing an error fault message. Unfortunately there is no firmware upgrade available online therefor a repair is needed. If you are experiencing a no power issue, try these steps: 1. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera. Please make sure that you are installing a fresh/ fully charged battery c. Turn the camera on. 2. Without the memory card, turn your camera on. (If it works then it?s your memory card that is faulty) 3. Please test with the a different battery If you do not have access to another battery Try these steps instead: Please take the battery out of the camera. b. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the battery. If you camera doesn?t switch on you will need to order a no power repair with KODAK or a new cable.

Jan 19, 2010 | Kodak EasyShare One Digital Camera

1 Answer

Nintendo DS


take battery out any put back in hould fix your problem mine did exactly the same and that worked good luck

Jan 05, 2010 | Nintendo DSi Blue Console

1 Answer

No DS card inserted and There is no gamepak inserted error messages on Nintendo DS


Problem Solved: Look into the socket where the cartridge is inserted and count the number of pins you see.
If it is less than 17, then you have a contact pin that has broken off or is bent to the point it can no longer be seen and is not making contact with the cartridge.
If you have warranty, take it back and have them replace the unit, if you don't have warranty you have to take the unit apart and replace the socket yourself. (WARRNING) if you have no experience with soldering, do not attempt this!
I have 30+ years in electronics and have taken these units apart, and have always found pins missing or bent over to the point of not making contact.
Hope this helps!

Jun 18, 2009 | Nintendo DS Lite Console

2 Answers

Nintendo DS Lite


INSERT THE GAME CARD WHEN THE DS IS OFF

Dec 18, 2008 | Disney Interactive The Suite Life of Zack...

1 Answer

Can't get Past System Settings


this is a internal battery fault find a repairer or look on you tube as some people have done tuturial videos for diy

Mar 09, 2008 | Nintendo DS Lite Console

2 Answers

DS Card Not Recognized


the card slot may be dusty, blow gently into it (making sure no spittle gets in) or get a clean cloth and wipe the outside of it. On no account must the slot get wet, or it will probably get damaged and will not work.

Dec 02, 2007 | Nintendo DS Lite Console

6 Answers

Error message displayed on LG tromm washer model # wmt2778w


Flashing UE - The display shows:
• Load is too small.
• Load is out of balance.
• The washer has an imbalance detection and correction system. If individual heavy articles are loaded (bath mat, bath robe, etc.) and the imbalance is too great, the washer will make several attempts to restart the spin cycle. If an imbalance is still detected, the washer will stop and the error code will be
displayed.

Possible Solution
• Add 1 or 2 similar items to help balance the load.
• Rearrange items to help balance the load.
• Control error.

Nov 07, 2007 | LG WM-2277HW Front Load Washer

Not finding what you are looking for?
Meade DS-2114 ATS (325 x 114mm) Telescope Logo

Related Topics:

742 people viewed this question

Ask a Question

Usually answered in minutes!

Top Meade Optics Experts

Joe Lalumia aka...
Joe Lalumia aka...

Level 3 Expert

3186 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Meade Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...