HP D7460 which is chute 4? - PhotoSmart HP Office Equipment & Supplies

Sorry HP is the only one that will have the software, no way around it.

1) connect printer directly to wall
2) try different walloutlets
3) unplug the power from the back of the printer and then press and hold down the power button for 30 sec release the button. plug in the power chord..
4) if it does not work service the product

Try using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English)

If you need more help come back.

Post / thumbs / testimonial are welcome!

Here's how to resolve that...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02558798&cc=us&lc=en&dlc=en&product=3184567&tmp_track_link=ot_search

hold power button for 30-60 seconds after turning it on it should reset

make sure its compatible with computer before installing because you computer need to recognize the printer after you pluged the printer with computer

Carriage jam usually comes from ink on the clear encoder strip that runs across behind the carriage. You need a damp Q-tip to clean from one end to the other, The other thing, on the HP is the cleaning station on the right gets gummed up with old ink and won't go toward the back fully, stopping the carriage.

Check your printer prefences, bordless option might be on.

Just needed to be unplugged (both at wall and at printer) for two minutes. Restarted and it worked fine.

Did they suggest uninstalling it from device manager, completely and downloading the new vista driver fo your printer off the HP website??? and then installing this.