Question about Jet 3 Ultra Power Chair

Open Question

Remove battery remove seat and top cover to access and remove the battery

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing dead battery from 2014 Honda Forza


the battery is located under the seat to gain access you will have to remove the back seat trim then the seat itself then you can access the battery cover then you will see battery which is held in place by thick rubber band

Apr 25, 2014 | 2006 Pontiac Solstice

1 Answer

Remove the seat of the 2008 harley sportster


Usually don't have to remove the battery via the seat area. The battery should be accessible via the left side cover. Grab both sides of the side cover at the top. Pull out and down so that it will swing down. The battery is right behind that. Remove the battery restraining strap bolt at the bottom and swing up to unhook from the top. Pull out just enough to disconnect the cables from the + side of the battery (being careful not to touch the wrench or anything to the frame in the process). Move the leads you just disconnected clear of the battery and then slide out the battery just enough to be able to unscrew the leads from the - terminal. Then just slide the battery out the rest of the way.

Feb 14, 2014 | Harley Davidson XL 1200 C Sportster Custom...

2 Answers

How do you remove the battery from a 1997 harley davidson low rider fxdl


The seat must be removed first to for access.
Remove negative connection @ frame, and positve connection @ battery.
Remove the lower rear bolt (left side of battery box @ the frame upright)
Remove the upper rear bolt, and swing down the battery box
Remove top cover ,and side cover
Lift battery out and remove negative cable from battery.

Jul 05, 2011 | Harley Davidson FXDL Dyna Low Rider...

1 Answer

Can remove the front passenger seat of a 2003 Honda Odyssey? How?


On models with side airbags, disarm the airbag system before starting work. Get the code for the car stereo from the owner's manual or invoice paperwork. Disconnect the cable from the negative terminal of the battery. slide the seat forward to access the rear riser covers. Release the tabs on the outer edge of the riser cover and the clips to separate the riser cover. remove the lower anchor bracket from the weight sensor on the outside seat rail. slide the seat to the rear and remove the front riser cover--releasing tabs and clips as before. Now you can access the seat mounting bolts. Remove them. Tilt the seat forward and disconnect any wire connectors. Lift the seat from the vehicle. Installation is reverse steps of removal. Connect the negative battery cable. Use the stereo code to reset the radio.

Jan 29, 2011 | 2003 Honda Odyssey

1 Answer

How do you get access to battery on 2006 kawasaki zx14


You heed to remove the front seat and fuel tank cover. The access cover for the battery is on the right side of the bike just beneath the fuel tank cover. There are 5 - 8mm bolts that must be removed to access the battery. Some people leave the top 8 mm bolt out when re-assembling so your dont have to remove the fuel tank cover next time.
Steve

Jan 02, 2011 | 2006 kawasaki ZX-14

1 Answer

How do I remove the seat to get to the battery to replace/re-charge the battery on my 2006 honda 650 vlx..?


The battery can be accessed by removing the right side cover and unbolting the smaller battery cover underneath the fuse box. The seat is removed by taking out the two bolts that hold it in place. I believe the two bolts are underneath the fender and go up into the seat You should not have to remove the seat to charge or remove the battery.

Dec 13, 2010 | Honda Vigor FX 650 Motorcycles

1 Answer

How do i remove the seat to get to the battery


There are three screws holding the seat down. One at the back which is easy to see the other two you need to remove each top side cover (left & right) to access the other two. More info here

Apr 10, 2010 | 2003 Kymco Venox 250

3 Answers

I just bought this bike, it`s my first bike now it won`t start, the battery seems to be dead, but i don`t know where the battery is located on the bike.


the battery is under the oil cooler directly vbehind the front wheel, behind a black or chrome cover you must remove 2 bolts to remove the cover to access the battery,

Mar 12, 2010 | 2005 Suzuki Boulevard C90

1 Answer

I just bought a 2007 shawdow aero I need to jump/charge the battery Im new and have no book so how do I get to the battery thank you mark


To access the battery you will need to remove the seat which will expose the battery compartment top cover, remove the cover to access the battery.

Nov 16, 2009 | 2007 Honda VT 750 Shadow

2 Answers

Want to replace fuel pump need help to where its at and how to do


Fuel pump is located inside the fuel tank access cover location. Here's the details:

  1. Properly relieve the fuel system pressure.
  2. Disconnect the negative battery cable.
  3. Open the rear access door.
  4. Release the catch for the back seat and tilt the seat out of the way.
  5. Move the carpet behind the seat that covers the fuel pump access panel.
  6. Disconnect the fuel pump electrical connectors.
  7. Remove the screw securing the ground wire.
  8. Remove the four screws securing the fuel pump access panel and position it out of the way.
  9. Remove the hose clamps connecting the fuel hoses to the fuel pump.
  10. Disconnect the fuel hoses from the fuel pump.
  11. Disconnect the fuel tank pressure sensor electrical connector.
  12. Remove the eight retaining screws securing the sender assembly to the tank.
    WARNING The fuel assembly is easily damaged. Use care when removing the assembly from the tank.
  13. While twisting and tilting, gradually lift the fuel sender assembly and remove from the tank.
  14. Wrap the fuel pump assembly in a rag before removing the assembly from the vehicle.
  15. Cover or seal the fuel tank until installing the fuel pump assembly.
  16. Remove the retaining hardware that holds the sender to the fuel pump assembly.

To install:
  1. Install the retaining hardware that holds the sender to the fuel pump assembly.
  2. Remove the temporary covering or seal that was used to protect the tank.
  3. Install the fuel pump into the access port on top of the fuel tank.
  4. Carefully, twist the fuel pump as necessary to properly position it in the fuel tank.
  5. Install the eight retaining screws securing the sender assembly to the tank.
  6. Connect the two fuel hoses to the pump and secure with clamps.
  7. Connect the fuel tank pressure sensor electrical connector.
  8. Insert the ground wire and fuel pump electrical connector through the access hole and install the access cover.
  9. Connect the fuel pump electrical connector.
  10. Secure any loose wiring with adhesive tape and reattach the carpeting.
  11. Release the catch for the rear seat and put the rear seat in the normal position.
  12. Close the rear access door.
  13. Reconnect the negative battery cable.
I can help you further and show you where you can access the information for free. Good luck!

Apr 28, 2009 | 2000 Kia Sportage

Not finding what you are looking for?
Jet 3 Ultra Power Chair Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jet Health & Beauty Experts

Colin Taylor

Level 2 Expert

346 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

278 Answers

MobilityRepairSpecia...
MobilityRepairSpecia...

Level 1 Expert

61 Answers

Are you a Jet Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...