Question about Panasonic Toughbook CF-30 Notebook

1 Answer

TOUCH SCREEN DOES NOT WORK

THE TOUCH SCREEN DOES NOT WORK, THE STYLUS NOR THE TOUCH OF A FINGER WORKS WHEN PRESSED TO THE SCREEN

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Panasonic Expert
  • 96 Answers

There are three (3) possible Answers:
First: Your unit does not have TouchScreen.
If the part number has CF30xTxxxxx then the "T"=TouchScreen.
If your unit has touchscreen then,
Second: The TouchScreen may be disabled in the BIOS.
Check the BIOS and see if TouchScreen is "ENABLED".
If it is DISABLED, then ENABLE it usually by pressing
the spacebar key while it is highlighted and then
SAVE and EXIT the BIOS.
Third: You do not have the Touchscreen Drivers loaded.
Locate these drivers at the Panasonic Website:

http://pc-dl.panasonic.co.jp/dl/

Good Luck!
Regards,
Richard - Montreal Based
Panasonic Toughbook Authorized Dealer since 1989.

Posted on Feb 08, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen touch


Refer to the trouble shooting at Nintendo. Your screen may not be working due to the game your playing if any. If that's not the case you may need to recalibrate your touch screen.
http://www.nintendo.com/consumer/systems/dsi/en_na/trouble_screen.jsp#respond

Aug 15, 2013 | Nintendo Dsi Pink Console

Tip

How to Sync Stylus with LeapFrog Leapster 2 Learning System


If you need to sync the device to the stylus just follow the steps below.<br /><br />1. Turn your <span>Leapster</span> 2 off, and remove the game cartridge<br /><br />2. Hold down the 'hint' button while the game is off. The 'hint' button is the middle small button in the row of three above the directional pad on the left, with a '?' on it.<br /><br />3. With your finger still firmly on the 'hint' button, turn the <span>Leapster</span> 2 back on. Keep your finger on the 'hint' button.<br /><br />4. The screen should be displaying the calibration screen. You can release the 'hint' button now.<br />5. Press the 'A' button on the right to enter the calibration screen.<br /><br />6. A small '+' sign will appear on the screen. Touch it with the stylus. A new '+' sign will appear. Touch this with the stylus too, and repeat for as many '+' signs as your <span>Leapster</span> 2 throws at you.<br /><br />7. The screen will return to the calibration screen. You can now turn the machine off. Leave the cartridge out of the console, and turn it back on.<br /><br />8. Your stylus and touch screen should now be working, enabling you to sign in as usual.<br /><br />9. If it is working correctly then you can turn it off, add a game cartridge and turn it back on.<br /><br /><b>Thanks for <span>using</span> <span>Fixya</span></b>

on Mar 09, 2011 | Toys

1 Answer

The touch screen doesn't work with my finger tip, only when my nail touchs screen, also did the screen calibration, did not not help


It may be a resistive screen rather than a capacitive screen which is not as sesitive to touch. You may need to use a stylus as it may need slight pressure vs just touch if it is a resistive screen.

Apr 05, 2013 | Garmin zumo 550 GPS Receiver

1 Answer

I can't calibrate the leapster.I can't get pass enter a name


Hi,


Welcome to Fixya. If you need to sync the device to the stylus just follow the steps below.

1. Turn your Leapster 2 off, and remove the game cartridge

2. Hold down the 'hint' button while the game is off. The 'hint' button is the middle small button in the row of three above the directional pad on the left, with a '?' on it.

3. With your finger still firmly on the 'hint' button, turn the Leapster 2 back on. Keep your finger on the 'hint' button.

4. The screen should be displaying the calibration screen. You can release the 'hint' button now.
5. Press the 'A' button on the right to enter the calibration screen.

6. A small '+' sign will appear on the screen. Touch it with the stylus. A new '+' sign will appear. Touch this with the stylus too, and repeat for as many '+' signs as your Leapster 2 throws at you.

7. The screen will return to the calibration screen. You can now turn the machine off. Leave the cartridge out of the console, and turn it back on.

8. Your stylus and touch screen should now be working, enabling you to sign in as usual.

9. If it is working correctly then you can turn it off, add a game cartridge and turn it back on.

If you have questions please let me know.Thanks for using Fixya

Aug 03, 2011 | LeapFrog Leapster 2 Learning System

1 Answer

The pen has stopped working when touching the screen


If your Leapster 2 will turn on, but the touch screen is not responding to the stylus, try re-calibrating the stylus with the screen using the steps below: 1. Turn your Leapster 2 off, and remove the game cartridge.
2. Hold down the 'hint' button while the game is off. The 'hint' button is the middle small button in the row of three above the directional pad on the left, with a '?' on it.
3. With your finger still firmly on the 'hint' button, turn the Leapster 2 back on. Keep your finger on the 'hint' button.
4. The screen should be displaying the calibration screen. You can release the 'hint' button now.
5. Press the 'A' button on the right to enter the calibration screen.
6. A small '+' sign will appear on the screen. Touch it with the stylus. A new '+' sign will appear. Touch this with the stylus too, and repeat for as many '+' signs as your Leapster 2 throws at you.
7. The screen will return to the calibration screen. You can now turn the machine off. Leave the cartridge out of the console, and turn it back on.
8. Your stylus and touch screen should now be working, enabling you to sign in as usual.
9. If it is working correctly then you can turn it off, add a game cartridge and turn it back on
Thank you for using fixya! I hope I had helped you with your problem. May you have a good day!

Mar 28, 2011 | Leapster 2 Handheld Game

2 Answers

The touch screen does not respond to the stylus what can i do?


Hi,


Welcome to Fixya. If you need to sync the device to the stylus just follow the steps below.

1. Turn your Leapster 2 off, and remove the game cartridge

2. Hold down the 'hint' button while the game is off. The 'hint' button is the middle small button in the row of three above the directional pad on the left, with a '?' on it.

3. With your finger still firmly on the 'hint' button, turn the Leapster 2 back on. Keep your finger on the 'hint' button.

4. The screen should be displaying the calibration screen. You can release the 'hint' button now.
5. Press the 'A' button on the right to enter the calibration screen.

6. A small '+' sign will appear on the screen. Touch it with the stylus. A new '+' sign will appear. Touch this with the stylus too, and repeat for as many '+' signs as your Leapster 2 throws at you.

7. The screen will return to the calibration screen. You can now turn the machine off. Leave the cartridge out of the console, and turn it back on.

8. Your stylus and touch screen should now be working, enabling you to sign in as usual.

9. If it is working correctly then you can turn it off, add a game cartridge and turn it back on.

Thanks for using Fixya,

Mar 02, 2011 | LeapFrog Leapster 2 Learning System

1 Answer

How do I change the sensitivity to the screen so that I can use my longnails & not my finger?


you will not be able to use your fingernail on the hero screen. the touch screen is similar to the iphone (capacitive) and different to most other touch screens that use a stylus (resistive).

your finger is required for the screen to pick up where you touch.

there is a special stylus you can buy that will work, but make sure it is specifically for the iphone. a standard plastic tipped stylus will not work.

Nov 19, 2009 | HTC Hero Smartphone

1 Answer

Pokemon will Not Set Up


DO NOT breathe or move ur thumb/stylus after a few seconds it'll work
took me a while 2 figure out that it knows if u move or breathe

Dec 25, 2008 | Pokemon Mystery Dungeon : Explorers of...

1 Answer

DS will not move past aura selection.


Keep ur thumb or stylus COMPLETELY still and DO NOT BREATHE the microphone will sense if u do and make u wait longer it took me a while 2 figure that out

Dec 25, 2008 | Pokemon Mystery Dungeon : Explorers of...

2 Answers

Problem with the touch screen an stylus


Press the Up + Down buttons at the same time. This will turn off the "Digitizer" function on the tablet and allow the user to use their finger, the stylus, or blunt end of a pen.

Aug 21, 2008 | Itronix Duo-Touch Tablet PC

Not finding what you are looking for?
Panasonic Toughbook CF-30 Notebook Logo

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Computers & Internet Experts

micky dee

Level 3 Expert

2727 Answers

Cindy Wells

Level 3 Expert

5102 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Panasonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...