Question about Singer 7422

Open Question

Light keep flashing machine doesn't work - Singer 7422

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

-light_keep_flashing_machine_doesnt_work


Sounds like a computer malfunction. Not much choice but take it for service.

Aug 15, 2016 | Singer Advance 7422 Electronic Sewing...

1 Answer

Why does it keep stopping with lights flashing when filling bobbin?


Singer 7422 keeps stopping with lights flashing when filling ...

www.fixya.com/support/t26006759-singer_7422_keeps_stopping_lights
4 hours ago - Singer 7422 keeps stopping with lights flashing when filling bobbin Machine stops ... Machine stops and red lights flash when loading bobbink.

Dec 13, 2015 | Singer Sewing Machine 7422

1 Answer

FQ-4 keeps beeping


it's possible that the motherboard that controls the embroidery
has a problem that needs servicing

Dec 22, 2012 | Sewing Machines

1 Answer

Foot pedal doesn't work when pressed


you can either have that foot pedal checked or buy a new one

sewing machine parts
sewingpartsonline.com
sew4less.com
sewusa.com
premiersewing.com
ebay

Apr 12, 2012 | Sewing Machines

1 Answer

Thread tensioner does not work


You need to specify the model. Different tensioners for different models.

Feb 13, 2012 | Bernina Sewing Machines

1 Answer

I have a Singer Sewing Machine #9444. There is no electrical getting to my machine since the light doesn't work and the foot pedal doesn't work after I turn on the machine


Try replacing the light bulb or rerouting the wire so it won't be affected by the light bulb or the foot pedle. Becarefull though because if you rerout the the wireing in the foot pedle you're taking away the off/on swich so it'll stay on. You may want to open up the foot pedle and see if there is anything loose, not conected or broken. The pedal is used as an on/off swich so it may just be stuck in the off position and not making contact when you press down on it so it won't turn on.
If you can't fined a blulb for it by the way you can disconect the socket where you screw it in and install a new one. Make sure the new one will fit in the same hole though. Then it should be easy finding a bulb for it. PLEASE MAKE SURE THE MACHINE IS DISCONECTED BEFOR YOU DO ANY OF THESE THINGS. Good luck!

Sep 30, 2011 | Sewing Machines

1 Answer

The machine keeps jamming and the bottom threads are bunched up. I have the correct thread for denim and #16 needle. The machine worked fine for most of my project but now it doesn't. I have used...


Do you have it thraded correctly? Is the bobbin and its case in correctly? Do you have a manual? It can help with these issues. Linda at Relics

Jun 19, 2011 | Kenmore 15358

1 Answer

My needle keep hitting something in the bobbin area, I have taken the bobbin holder out hopefully replaced it right, but doesn't work. there is another wire and at the end is a sensor does that just...


If the bobbin has been inserted correctly and the needle keeps hitting something, check the bobbin and bobbin holder for damage (bent or missing parts) If there is no damage to either of these then the timing of the machine may need to be adjusted. This is usually best left to someone with sewing machine repair experience.

May 17, 2011 | Brother SE-270D Computerized Sewing...

1 Answer

I keep getting a connection Error Message. Please Check that USB cable is connected and power switch is turnedl. I just upgraded to a new computer from and older model computer


Make sure you're plugging the USB cable from the machine intoa USB port in the BACK of your computer, not one of the front ports or a porton a USB hub. The cable and machine need more power than most of those portsprovide, a technical detail that Singer doesn't realize. If you're using a laptop, keep trying different USB ports until you find one that works. Good luck!

Apr 29, 2011 | Singer CE-200 Quantum Futura Computerized...

3 Answers

Bernina Buttonhole foot #3A


Hi, you must have an 1130S which means it could also be a circuitboard issue. If the LED/LCD light for the buttonholer does not flash you either need a new RET-Print (circuitboard) or a new buttonhole foot. Sorry to say that you DO more than likely need a new buttonhole foot according to my manual on this machine. No way to repair the foot that I know of.
You should bring the machine in and try it first.
Guess not all news is good news. Sorry.
Rick (Bernina tech)

Aug 18, 2008 | Bernina Virtuosa 160

Not finding what you are looking for?
Singer 7422 Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Cindy Wells

Level 3 Expert

5225 Answers

mystery_soul

Level 2 Expert

48 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...