Loud noise near end of cycle - Fisher Paykel DD24DCW7 | Double Dishwasher Drawer w/Recessed Handles - White

look insides all racks removed to be sure things there do not belong there cups spoons, etc.
make sure knives, in rack do not slip through the rack grid
and hit the rotor below.

I don't know slot about them but what ever cycle is at the end that's making the noise would be what I would be looking at to fix..

Hi valued Consumer, We would like to inquire further about your post with you. Please respond back to this email address [email protected] with your name, user id (Valued Consumer), phone number, street address, zip code, reviewer name, model & serial number, and date of purchase on the appliance.

the capasitor is basted.
replace the capacitor

What is the model number of your unit?

Is it from the drain solenoid valve!!! If so do not worry.

You either have something caught between the tub and basket or a bearing bad.
Eric

the smell is your clutch and the lack of draining is a clogged washer drain protector. see these at www.repairclinic.com drain protector is part 541811 and clutch is 2670. go there enter model number and scroll down to the red 100 click it and look for these part numbers.

The basket drive and the drive block will need replacing. The nut that holds the basket to the drive block may have come loose causing the drive block to 'jump' over and damage the tabs on the basket drive that causes the thumping as the spin cycle ends. To repair, you will need to purchase a basket drive and drive block. The agitator, balance ring, basket and transmission, will have to be removed in order to replace the basket drive. If less than 3ys old, consider contacting whirlpool for possible warranty concession.

On some othersites it was said that the plate on the discharge impeller came loose and was banging on the black metal impeller. When I took mine apart that what mine looked like. I glued mine back with J B WELD, and there is still some noise during rinse. One person said he took it out and the noise went away. The part came be bought for about $15.00 online. Are there any torque specs for these screws?