Question about Kirby G6 Bagged Upright Vacuum

1 Answer

How do you make it blow you?

Im having problems trying to figure it out on how to make my kirby blow out.... help?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 357 Answers

Hi!
You need to take the power nozzle off and attach the thing that looks like a little plastic cup with two hooks on it. This is the intake guard. Attach it to the front. Now remove the cloth bag and put the hose on the hole where the bag was. You'll have to line the arrow on the hose up with the notch on the Kirby and push the hose arm toward the Kirby until it pops on. If you need to, lube up the edges of the hole with a wee bit of vaseline or hand lotion. This makes the hose engage easier. Since you lost your manual, you may need belt change instructions as well. Here is a link to my online guide that will show you how....
http://reviews.ebay.com/CHANGING-THE-BEL...
Hope this helps...
Marci

Posted on Jun 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there someone really available to ask a kirby question to?>


my email is cmeflyby@yahoo.com im an actual kirby dealer nd inspector i found this website nd enjoy helping with problems ppl have with the kirby ask anything

Aug 26, 2011 | Kirby Ultimate G Bagged Upright Vacuum

1 Answer

Vacuum won't switch on;got it apart;cord ok;need wiring diagram


Its a great idea to write on paper how its connected . So it helps with dis assembly & reassembly . I tried a Internet search . Looks like it'd cost money for a service manual. Though. I found a Kirby Spares Website that could help. Although it doesnt have Document downloads with repair help. There are spares & there is a telephone number for an engineer available during office hours. That you could ask for repair help. With wiring connections for your Kirby G3.

http://kirby-owners-club-shop.com/faqs.htm

The Engineers Telephone Number is 0845 388 9301

I repaired my Parents Kirby Heritage some while ago. With a new set of Brushes. Bulb Repair.

They are a Great Machine. Bit Expensive. Though Tough & Well Made !

Gary

May 24, 2009 | Kirby Generation 3 Bagged Upright Vacuum

1 Answer

Cleaning a drain using kirby


first can it pick up water if so you put take the hose on suction and wrapp a rag around the end so you get full suction in the drain and turn it on.if not hook the hose up so it blows instead of sucks,do the same thing with a rag around the end of the hose and seal the hose in the drain,then turn it on.if you have a shop vac that will work better

Apr 27, 2009 | Kirby G6 Bagged Upright Vacuum

1 Answer

Kirby Sentria brush roll not rotating


HELLO,

MY GUESS IS THAT YOU ARE NOT SEATING THE BELT PROPERLY BEFORE PUTTING THE NOZZLE BACK ON THE MACHINE. PLEASE FOLLOW MY GUIDE STEP BY STEP AND IT SHOULD SOLVE YOUR PROBLEM...

http://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039

HOPE THIS HELPS...
MARCI

Jan 28, 2009 | Kirby Ultimate G Bagged Upright Vacuum

1 Answer

Kirby G 6 but it only blows air out, no suction. Also how do you detach the cloth bag to wash it?


I have the solution for the cloth bag laundering process...

Here is a link to my guide for cleaning the Kirby cloth bag...

http://reviews.ebay.com/DEODORIZING-CLEA...

It should be helpful. :0)

The Tech Drive problem SHOULD be able to be fixed easily and fairly cheaply by a vac shop or Kirby distributor. There is an adjustment that needs to be made, but it shouldn't require purchasing any parts.

Marci

Nov 17, 2007 | Kirby G6 Bagged Upright Vacuum

Not finding what you are looking for?
Kirby G6 Bagged Upright Vacuum Logo

Related Topics:

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Jim Parker
Jim Parker

Level 3 Expert

1041 Answers

Richard Agent

Level 2 Expert

98 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...