Question about Canon imageRUNNER 2545i AllInOne Laser Printer
Before the error is E000002.After I replace new fixing unit then the new error E00000 is appear again.Any solution
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: E00002-0000 error code
ont. Panel, press the following, one after the other, * (additional functions), 2, 8, * (additional functions). You are now in Service Mode. Touch the Function Tab, touch the Clear button, touch the ERR button, when it is highlighted, press the OK button at the botton of screen. Power Cylce unit. If it comes back up, may have been a fluke. However, if it comes back, check your Fixing Assy for jammed paper, or damage to the Fixing Film (Upper Roller). Replacing the Film is not hard. After you remove the Fixing Assy., its a couple cables and springs. Rather on the easy side for Film replacements. Remebmer, on these models, the Film is also the Heater and Upper Fixing Roller. The Film is most likely on the pricey side for new, believe you can find rebuilds. Just keep in mind that the Film is still a lil' bit cheaper then the whole assy., and 8 out 10 times, its the Film that fails in the asssy
Posted on Mar 23, 2008
E002/E000/E003/E261/E733 Error code: Due to AC line noise Error Code
Symptom E002/E000/E003/E261/E733: due to AC line noise. Description E002/E000/E003/E261/E733 occur due to AC line noise.
If the above error codes are frequently recorded in the error log, they might concern AC line noise. Cause When the machine tries to detect a Zero-cross signal of AC line, it will fail if a noise occurred around the zero-cross point. Since the fixing temperature is controlled based on the zero-cross signal, there is a possibility that the fixing temperature could not rise properly if a noise occurs several times. Field Remedy Replace the Switching Regulator PCB ***'y with a new one.
The circuit has been modified to resist a noise. REMEDY Caution
Press (* then 2 and 8 together then *)you are in service mode monitor:To clear the error, execute the following in service mode: COPIER>FUNCTION>CLEAR>ERR.
GOOD LUCK MATE ......KINDLY RATE ME !!!! THANKS.
Posted on Sep 26, 2009
Tips for a great answer:
Feb 13, 2015 | Canon Office Equipment & Supplies
Oct 27, 2014 | Office Equipment & Supplies
Aug 10, 2014 | Canon Ir 2525 Copier new
May 29, 2014 | Canon imageRUNNER C5180 Color Copier
Sep 05, 2011 | Canon imageRUNNER C3200 Copier
May 16, 2010 | Canon imageRUNNER 3300 All-In-One Laser...
Apr 30, 2010 | Canon iR 2030i All-In-One Laser Printer
Dec 02, 2009 | Canon (6981A002AA) for imagerunner 2200,...
Mar 10, 2009 | Canon imageRUNNER 4570 Copier
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: