Question about Bosch SHU5315UC Dishwasher

1 Answer

I have a Bosch SHU5315UC and the only cycle that will run is the rinse/hold. None of the other cycle buttons will work. It seems as if they have no resistance or spring back when pressed. Any ideas?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,511 Answers

Depending on age and other factors; key pads do wear out and require replacement. Many of these controllers us a silicone positive touch system like the keypad on a computer. Others use a direct contact system that has a spring action and contact points. If the later fails, it can be due to use, a breakdown of the recoil system, or damaged contacts.

Posted on Mar 18, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 209 Answers

SOURCE: Bosch diswasher

check heater element for open circuit, if the dishwasher fills and empties and wooshes the water round, there is little else to go wrong

Posted on Oct 07, 2007

IB4G2008
  • 3587 Answers

SOURCE: Bosch SHU9915 Does Not Drain

faulty controls..the signals are apparently getting there, but the machine is intepreting them oddly..may need a new control board behind panel

Posted on Mar 09, 2008

SOURCE: Dishwahser rinse cycle running for hours

I have a Bosch SHU5316 -- same symptoms -- turned out to be the control module (the thing with the lights & buttons on it). First replaced under parts warranty. The next time, I did it myself (you take part of the door apart). Not too bad to do, but the module cost about $100. Since this was the second time it happened, I bought a "lifetime" replacement warranty on the module ($10). Best ten bucks I ever spent. I am on my third module.

Posted on Jul 23, 2008

  • 7 Answers

SOURCE: Dishwahser rinse cycle running for hours

I'd say it is the control module is out -- cost about $100 (I am on my third). I got a "lifetime" warranty when buying my second one. If you are handy, you can replace it yourself. You can call Bosch to confirm this (I did). It mounts inside the door. I have a Bosch SHU5316.

Posted on Jul 23, 2008

mark_37388
  • 100 Answers

SOURCE: My Bosch Dishwasher cycle runs for 2 plus hours!

If this unit is running for a long time it is because it is still try to heat the water temp up it is eather the control board or the heater.

Posted on Mar 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch Dishwasher Model SHU5315UC/U06 Looking for Cycle Buttons That are no longer avail #176079


There are several places on-line where you can find this parts. Depending on where you are. For example you can look up www.dlpartsco.com

May 08, 2016 | Bosch Dishwashers

1 Answer

I cannot figure out how to advance a cycle without having to go through the entire cycle. For example, I had a drain problem with my sink and the plumber put the rinse and hold cycle on for about 10...


Hello,

Welcome to FixYa.

Your post doesn`t specify a model number, however on most Bosch dishwashers in order to change from "rinse & hold" to "regular" ( or any cycle ) simply turn the unit "on" and once the machine begins push the regular button twice.

Or the button applicable to the cycle you want.

That should change the display to look like this...

24982a0.jpg
If this doesn`t work, try it for "econo" or any alternative and let me know how it goes.

Good luck.

Regards,

Macmarkus :)

Sep 03, 2010 | Bosch Dishwashers

1 Answer

Bosch SHU5315UC dishwasher doesn't end cycle


make sure 120 degree water enters the diswasher

Feb 08, 2010 | Bosch SHU5316UC Dishwasher

1 Answer

We have a Bosch dishwasher model SHU5315UC/U06. When we ran a "Regular Wash" the dishwasher ran continuously and the timer did not count-down. None of the Delicate or Rinse and Hold buttons responded. ...


My father-in-law has a Bosch and they had the same problem. The tech guy said it was not heating properly and that caused it to continously run because it won't tick down the timer if it doesn't reach a certain temp, so try turning your faucet as hot as you can, right before you turn on the dishwasher and see if that is the problem, if not the heating element might not be working properly. If you still have a warranty, try to get them to see and fix it, otherwise, get a repairman to check it out. You can also turn up your hot water heater, but not so hot it would be dangerous to use, but enough to get the temp up. Otherwise the heating element might need to be replaced.

Jul 28, 2009 | Dishwashers

2 Answers

Reset model smu7052uc


there is none- if the program is mucked up-- pull the plug for 5 minutes

Jul 16, 2009 | Bosch 24 in. SMU70 Built-in Dishwasher

1 Answer

Bosch dishwasher SHU5315uc control board issue


Check the main smoothing capacitor on the control board. Could be low value.

Jul 24, 2017 | Bosch SHU5315UC Dishwasher

1 Answer

My Bosch Dishwasher cycle runs for 2 plus hours!


If this unit is running for a long time it is because it is still try to heat the water temp up it is eather the control board or the heater.

Mar 28, 2009 | Bosch Dishwashers

1 Answer

I HAVE A BOSCH SHU5315UC THE MOTOR IS RUNNING BUT NO WATER IS COMING OUT CAN YOU GIVE ME AN IDEA WHAT TO DO?


I had this same problem, It seems to be caused by a sticking float. Try filling it with water by hand with a few cups of water and then try running it through the rinse/hold cycle.

Jan 29, 2009 | Bosch 24 in. SHU5305UC Built-in Dishwasher

1 Answer

Not cleaning dishes


Our Bosch does a pretty good job of washing dishes. But we rinse most of the time. Not a hard rinse, but a rinse.

Are both spray bars rotating? You can test by seeing that the bars rotate easily by hand, and also by starting a cycle and opening the door real quick when you hear the spray hit the door.

Make sure the spray bar nozzles are all clear.

Has it ever done a good job of cleaning dishes?

DI you leave a heavy build-up of food on the dishes, and allow it to dry before washing?

Jan 26, 2009 | Bosch SHU5315UC Dishwasher

3 Answers

Dishwahser rinse cycle running for hours


Do you have high temp rinse or sanitize selected? This will pause the timer during the final rinse cycle to heat the water. The sensor might be bad. Try the quick cycle, I don't think this heats the water.

Jun 09, 2008 | Bosch 24 in. SHU43 Built-in Dishwasher

Not finding what you are looking for?
Bosch SHU5315UC Dishwasher Logo

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1466 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...