Question about Office Equipment & Supplies
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: c7980 error code
It means your waste toner is full. Pull the process unit and look on the each end for a screw on each side that are recessed. Remove them and take out the small panel that acts as a plug. Empty the excess toner out of each side and put covers back on. Then put your process unit back in go into the service mode. Press stop/clear button hold down, while holding press start button keep holding both buttons and then press the left side exposure button..hold all 3 buttons for approx 20 seconds till U comes up and starts flashing. Use the buttons under the display and put in 100 and press start to reinitialize the developer. After the unit stops initializing turn it off and on and you should be all set.
Posted on Dec 03, 2009
Hello sir; The code you display which means waste toner bottle full, just dump it .
Posted on May 12, 2009
Tips for a great answer:
Mar 22, 2014 | Kyocera FS-1118MFP Laser Printer
Jan 29, 2014 | Kyocera Mita KM-1815 All-In-One Laser...
Jan 25, 2011 | Kyocera FS-1118MFP Laser Printer
Jun 05, 2009 | Kyocera FS-1118MFP Laser Printer
May 12, 2009 | Copystar CS-1820 Copier
241 people viewed this question
Usually answered in minutes!