Question about Maytag MAH21PDD Commercial Front-Load Washer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I need to know if the motor came with a wiring diagram when it was purchased or did it just come by itself. You may have to learn how to read the wiring diagram that is stored inside the control panel.
Posted on Jun 23, 2008
Unplug the machine,bail out as much standing water as you can,remove the bottom panel 3-4 screws 1/4 inch driver.the pump sits right in front turn the handle to the left have plenty of towels,make sure you keep the Motor control board on the left dry,you will find a filter there that catches most debris but check the out going hose on the other side of the pump as well.
Posted on Oct 03, 2009
SOURCE: Maytag NFW7200TW leaking
The door seal is leaking and it is either installed incorrectly or just needs to be replaced. If the machine is under warranty, call the service people now. Hope this helps
Posted on Mar 28, 2010
SOURCE: maytag washer top load neptune
See this post for troubleshooting the Lr error code. . http://www.fixya.com/support/t2419091-maytag_neptune_top_load_fav6800aww_tub
Lr is locked rotor. My first thought was that this could be a Motor Controller issue. This owner replaced tried that and it did not resolve the issue. He then replaced the main Control Board and that fixed his machine. Without known good parts (Control Board Motor Controller) this might be difficult for a DIY fix.
The Service Manual for reference. Sears Parts Direct for reference.
If you are going to try to DIY the repair I will see if I can help……Rich
Posted on Apr 28, 2010
If you unplug the M13 connection from the ccu (main control) and the error goes away then replace the MCU (motor control unit) if it does not go away then replace the CCU
Posted on Nov 20, 2010
Tips for a great answer:
Oct 30, 2016 | Maytag Dryers
Feb 09, 2016 | Maytag Washing Machines
Sep 03, 2017 | Washing Machines
Dec 04, 2012 | Maytag Washing Machines
Mar 01, 2012 | Washing Machines
There is only one Analog Pressure
Sensor Switch Part no. W10156252, another one that it has is the water level switch (part
no W10415587). I believe you are
talking about the first one as that is what error code F35 means (ANALOG
PRESSURE SENSOR FAILURE). Hope
this helps...please post back for further assistance.
Sep 17, 2011 | Maytag MAH21PDD Commercial Front-Load...
Welcome to FixYa
F35 error means that there is some sort of issue with the steamer electronic board and analog pressure sensor has gone bad. Check that the hose is firmly attached with the washer and is not blocked. You can also check the water level pressure switch operation. Please get back to me if you have any other questions.
May 12, 2011 | Washing Machines
Dec 10, 2009 | Maytag SAV515DE Top Load Washer
Jun 17, 2009 | Washing Machines
Feb 01, 2009 | Maytag EPIC MFW9700S Front Load Washer
Dec 11, 2013 | Maytag MAH21PDD Commercial Front-Load...
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: